Food-safe plastic canister made of polyethylene with handle and tap. Particularly suitable for safe transport of water and other drinkable liquids. If necessary, the canister can also be hung from a corresponding eyelet. Opening diameter: 32 mm.

Folding water box, food-safe, taste- and odourless. With tap ø 10 mm and carrying handle. Opening diameter 30 mm.

Combi canister made of robust PE for heavy-duty use:With spoutRobust and insensitive to impactCap protected against lossSpout with integrated ventilation is stored in the canisterHigh stability due to large baseLarge handle facilitates carryingOptimised design and dimensionally stable thanks to circumferential container reinforcementsSpout: ø 4.5 cm, length: 24 cm

Large spout.

for canister lid

Who is not familiar with this? You want to empty your canister, but no water comes out or it starts to gurgle. The drain cock starts dripping and you do not know why? The reason: there is no more air in the canister. When you want to empty your canister, that is a big problem.The solution: an exhaust valve, which is easy to install. You only need to position the installation tip on the side of the O-ring on the tap and break through the canister wall with the tip, so that the tip drops inside. Now the exhaust valve is in place.

Provides new application areas in vehicles with low headroom thanks to its compact design. Especially suitable for vans. Easy and quick to fill and clean due to the large tank opening DIN 96. Spout with exhaust DIN 51.

The 12-litre wide-neck canister fits perfectly into storage boxes or under beds thanks to its flat design – ideal for campers who want to save space. With a large DIN 96 closure, it is easy to fill and clean, while an additional 3/4" closure allows for versatile use. Made from robust plastic, it is particularly durable.

with seal

with securing strap

With this ideal filling canister, filling your fresh water tank is no longer a problem. Thanks to the lateral, rotating handle, the canister can be moved easily. The exhaust valve ensures easy pouring. The robust spout can be simply stored in the canister after use. Due to the big opening DIN 96, you can clean it easily by hand. The folding handle can be locked after use!

Cleaning opening for welding with PE plates or tanks. With lid incl. seal. Approved for drinking water according to DVGW and KTW.

For Combi canisters.

Canister with screw cap and sturdy carrying handle; 3/4" thread unopened

with seal

Combo canister with valve, without spout. Stackable, food-safe, sturdy and impact-proof.

Combi canister made of robust PE for heavy-duty use:With spoutRobust and insensitive to impactCap protected against lossSpout with integrated ventilation is stored in the canisterHigh stability due to large baseLarge handle facilitates carryingOptimised design and dimensionally stable thanks to circumferential container reinforcementsSpout: ø 4.5 cm, length: 24 cm

Replacement seal for tank screw cap 120 mm.

Canister with screw cap and carrying handle; 3/4" thread unopened.

Folding water box, food-safe, taste- and odourless. With tap ø 10 mm and carrying handle. Opening diameter 30 mm.

Spout with screw cap for wide-neck canisters.

Canister with screw cap and fixed carrying handle. Including screw-in thread 3/4" unopened, for drain cock (not included).

Due to the continuous development of fresh water tank filler necks, conventional filling cans can no longer be used to fill up the newest vehicle generation.Therefore, this adapter was designed. It can be used with the filling can 300/584.Spout length with ¾" adapter: 18 cm, ø 27 mm (at flexible part). Incl. vent.

Provides new application areas in vehicles with low headroom thanks to its compact design. Especially suitable for vans. Easy and quick to fill and clean due to the large tank opening DIN 96. Spout with exhaust DIN 51.