Accurate level indication for almost all tanks up to 200 cm in height, easy to install, with integrated Bluetooth for wireless display via app or optionally via cable with a compatible display. Installation is quick and straightforward, with all necessary components included. Only a power supply of 10 – 30 V DC is required for operation.
Works with fresh, grey or black water tanksFor installation inside the vehicle
Multiple sensors can be displayed simultaneously with the app
Remote access possible (sensor must be connected to the app)
Additional signal output for external displays and panelsPro KitMaximum flexibility during installationFlexible installation on the tank from above or the side is possible
with screw ring, ventilation, seal and spout
Verpackung:
fertig verpackt
Who is not familiar with this? You want to empty your canister, but no water comes out or it starts to gurgle. The drain cock starts dripping and you do not know why? The reason: there is no more air in the canister. When you want to empty your canister, that is a big problem.The solution: an exhaust valve, which is easy to install. You only need to position the installation tip on the side of the O-ring on the tap and break through the canister wall with the tip, so that the tip drops inside. Now the exhaust valve is in place.
Cleaning opening for welding with PE plates or tanks. With lid incl. seal. Approved for drinking water according to DVGW and KTW.
Adapter for converting the threaded cap into a bayonet cap for connecting the Sanitary Flex to the tank 23 W.
For kerosene, gasoline, etc. Liquids can be pumped out of tanks and containers quickly and easily.
For securing gas and water tanks, including underfloor tanks. Load capacity per tensioning strap: 150 kg.The self-assembly kit consists of:1 steel tensioning strap; dimensions (L x W): 450 x 2.7 cm2 height adjustment pieces, zinc-plated for M82 eye bolts M8 x 25 mm, zinc-plated2 threaded screws M8/45 mm, zinc-plated4 threaded screws M8/25 mm, zinc-plated6 nuts M8, zinc-plated12 washers M8
Laser-based level measurement without mechanical parts, suitable for demanding conditions and diesel tanks. Accurate display for tanks up to 200 cm in height, easy to install. Wireless display via app thanks to Bluethooth or wired with compatible display. Requires 10 – 30 V DC. Solid, weatherproof sensors (IP67) for fresh, grey and black water as well as diesel tanks. Installed from the top with a view of the tank bottom, perfect for outdoor areas. Multiple sensors are simultaneously visible in the app. Optional remote access and external signal output.
Pro Laser KitMeasurement via laser, without mechanical componentsInstallation exclusively from the top of the tank with an unobstructed view of the tank bottom
Maße Durchmesser:
80 mm
|
Verpackung:
fertig verpackt
Plug-in cap, 3/4" – thread closed, canister neck incl. cut-out for sumbermisble pump wire and hose.
Flexible pipe, extendable up to 300 cm. Standard with two connections and clamps for connection with portable tank 40 W and Quick Connection W.
With this special cap, you can simply fill canisters or water taxis. Quick connector incl. hose ½" (easy to install). Place it on the canister to start filling it.
The Comet spout with integrated exhaust valve for water canisters is the perfect solution for anyone looking for a simple and efficient method of pouring water.
Maximum flexibility in installation and high resistance: This sensor is suitable for tanks up to 200 cm in height and displays precise fill levels. Installation is straightforward, with all components included. Thanks to integrated Bluetooth, the values can be displayed wirelessly via an app; alternatively, they can also be shown via cable on compatible displays. Powered by 10 – 30 V DC, the sensor is ideal for fresh, grey or black water tanks. Additionally, it is also suitable for outdoor use (IP65). Multiple sensors can be displayed in the app. Incl. remote access and signal output for external displays.