The Colorado city water regulator allows for direct water supply to your vehicle without the need for tanks or canisters. It features a built-in regulator with a check valve that reduces the inlet pressure from up to 12 bar to an outlet pressure of 0.7 bar. The device is protected in a UV-resistant ABS plastic housing and can be closed with a lid when not in use. It has a standard hose coupling for connection and a neutral design that fits well into the vehicle. The dimensions of the device are 90 x 110 mm.

With microswitch to switch on the submersible pump. Including hose tail and hose tail with nut for quick coupling of the water socket.

Without locking cylinder.

The GARDENA coupling easily and smoothly connects two hoses.

City water connection, thermoplastic. Pure white (RAL 9010), black or anthracite. With pressure reducer and magnetic hinged lid, water pressure is reduced down to 1.1 bar. Cut-out dimensions: 85.5 x 90 mm.

External shower connection with water socket. The shower fitting has a white shower head and a hose with a length of 2 m.

The high-quality GARDENA tap connector allows you to securely connect a garden hose to a tap. GARDENA manufacturer's warranty 5 years.

Housing for service hatch Smart Supply, long.

For water, long version. Lockable with 2 keys; ø 40 mm.

With one outlet each for gas and water supply outdoors. After removing the respective hose (gas hose and shower not included), the water supply will automatically stop. Equipped with gas shut-off valve. With lock and key. Installation dimensions: 157 x 67 mm.

Short version, incl. lid for hose connection ø 40 mm.

reinforced

Replacement lid with lock and key for Fiamma water tank filler caps with installation dimension: 80 mm.

Thanks to the integrated funnel, water can be safely filled into almost all water containers. Connection nozzles ø 40 mm are lockable. Incl. inner frame, installation template and screws.

Without key cylinder.

For filling nozzles. Nozzle ø 40 mm. Complete with tank cap and 2 keys.

Electrically switched, remote-controlled brass valve switch. If the valve is supplied with current, it opens; pressure-resistant up to 10 bar, not suitable for continuous current, with 2 connection nozzles 10 mm.

This mains water flushing is suitable for all built-in toilets of the brands Dometic and Thetford. It is coupled with the flush switch of the toilet and also controlled with it. Your advantage: you no longer have to fill the flush water tank.

Water socket incl. shower and pre-mixer for hot and cold water. With Charisma tap and Carletta hose. With microswitch to turn on the submersible pump. Also for pressure pumps up to 3 bar.

For cleanly filling containers.

For electric water pumps for retrofitting as automatic pressure pumps. With rubber diaphragm.Initial state open: current flows up to 1 bar pressure.

Short version for hose connection ø 40 mm incl. lockable lid. Connection: 3.6 cm.

Water socket incl. shower and pre-mixer for hot and cold water. With Charisma tap and Carletta hose. With microswitch to turn on the submersible pump. Also for pressure pumps up to 3 bar.

With hinged lid and magnetic closure. Opening diameter: 80 mm. Can be used, for example, as a conduit duct, cable pass-through, etc. Hole size: 87 x 81 x 89 mm.