Accurate level indication for almost all tanks up to 200 cm in height, easy to install, with integrated Bluetooth for wireless display via app or optionally via cable with a compatible display. Installation is quick and straightforward, with all necessary components included. Only a power supply of 10 – 30 V DC is required for operation.
Works with fresh, grey or black water tanksFor installation inside the vehicle
Multiple sensors can be displayed simultaneously with the app
Remote access possible (sensor must be connected to the app)
Additional signal output for external displays and panelsPro KitMaximum flexibility during installationFlexible installation on the tank from above or the side is possible
Variante:
Tankhöhe 25 – 75 cm
Measures the tank fill level capacitively, 0 – 2.3 V output signal, continuous measurement. Frost-resistant electronics (IP67), suitable for underground tanks. Insensitive to dirt, unaffected by overpressure.
Variants from €70.60*
For fresh and waste water tanks with O-ring seal. Nut and cable about 10 cm long with coupling. Can be used with all Calira switching/control panels with 4/5 measurement points such as Bord Control 506, Panel 334 and similar ones. Suitable for tanks up to an external height of 380 mm.
Tank indicators for precise level monitoring of fresh water, wastewater and waste tanks. A 3-colour light bar with 10 LEDs displays the current level including intermediate stages. Installation dim. (W x H x D): 30 x 63 x 15 mm.
Variante:
Tankhöhe 12 – 24 cm
Measures the tank fill level capacitively, 0 – 2.3 V output signal, continuous measurement. Frost-resistant electronics (IP67), suitable for underground tanks. Insensitive to dirt, unaffected by overpressure.
Complete set for fresh water tank display for canisters and permanently installed tanks with DIN 96 openings. Consists of a rod tank probe that can be shortened, a 12 m connection cable and a level indicator that can be installed anywhere in the vehicle. Incl. installation and operating instructions. All parts are ready to connect.Filling level displayOperating voltage: 12 V DC (9 V – 16 V)Current consumption: off: 0 mA; on: 35 mA, 12 VInstallation dimension/depth (W x H): 29/14 x 62 mmWater level sensorTank opening: 80 mmRod length: max. 370 mm (can be adjusted to tank height)Cable length: 12 m
Laser-based level measurement without mechanical parts, suitable for demanding conditions and diesel tanks. Accurate display for tanks up to 200 cm in height, easy to install. Wireless display via app thanks to Bluethooth or wired with compatible display. Requires 10 – 30 V DC. Solid, weatherproof sensors (IP67) for fresh, grey and black water as well as diesel tanks. Installed from the top with a view of the tank bottom, perfect for outdoor areas. Multiple sensors are simultaneously visible in the app. Optional remote access and external signal output.
For level measurement in 5 levels for fresh and waste water tanks. Unsuitable for fuel tanks. Suitable for tanks up to 380 mm external height. The level indicator is operated externally via a button, e.g. via Panel or Bord Control.
Variante:
Tankhöhe 15 – 50 cm
Measures the tank fill level capacitively, 0 – 2.3 V output signal, continuous measurement. Frost-resistant electronics (IP67), suitable for underground tanks. Insensitive to dirt, unaffected by overpressure.
Maximum flexibility in installation and high resistance: This sensor is suitable for tanks up to 200 cm in height and displays precise fill levels. Installation is straightforward, with all components included. Thanks to integrated Bluetooth, the values can be displayed wirelessly via an app; alternatively, they can also be shown via cable on compatible displays. Powered by 10 – 30 V DC, the sensor is ideal for fresh, grey or black water tanks. Additionally, it is also suitable for outdoor use (IP65). Multiple sensors can be displayed in the app. Incl. remote access and signal output for external displays.