MT03066, LiFePO4-compatible: the standby charger Pro protects the starter battery from deep discharge caused by standby consumers such as alarm systems or radios. It continuously monitors the RV and starter batteries and feeds excess charging current, for example from solar panels, into the starter battery. Suitable for all RV batteries, including modern LiFePO4 batteries, the standby charger Pro is ideal for off-grid camping or extended periods of inactivity.
All-round charger with professional featuresThe charger MXS 5.0 is equipped with the latest technology, which previously was only reserved for CTEK professional units. This charger solves plenty of battery problems; it is perfect for those with the highest demands.Battery capacity: 1.2 – 110 Ah, up to 160 Ah for trickle chargingFunctions:COLD/AGM: charging in cold weather and charging AGM batteriesRECOND: maintenance charging of deeply discharged batteriesAUTO: fully automatic for optimal charging12 V: for all lead-acid batteriesStep 7: fully charged batteryStep 8: maintenance charge
Intelligent battery maintenance: the Standby Charger Pro protects your camper's starter battery from discharge due to high power consumption from using the radio or opening doors. It offers automatic battery maintenance, is easy to retrofit and is compatible with lithium (LiFePO4), AGM, gel and lead batteries. With IU charging characteristics, adjustable charging voltage values (12 – 14.5 V), an 8 A charging current and overheating protection. Parallel operation is possible.
The Blue Smart IP65 charger is the new professional battery charger with built-in Bluetooth! It can be used with devices in your workshop or with motor vehicles such as (classic) cars, motorbikes, boats and motorhomes.
The seven-stage charging algorithm gets the best out of your battery. The charger provides the battery with the energy it needs, keeps it in a healthy condition, ensures better performance ... and a longer life.
Unlike other brands, the Blue Smart IP65 charger will attempt to recharge a deeply discharged battery by forcing a weak charging current onto it. Normal charging will then resume as soon as there is sufficient voltage between the battery terminals.
The charger is supplied with both crocodile clips and M8 cable lugs, making it very easy to connect to the battery. You can leave the device connected at all times if you wish.
The Blue Smart IP65 charger has built-in Bluetooth. This allows you to check the status of the charger and the battery on a smartphone, tablet or laptop. All charger settings can be configured using the VictronConnect app.
Technical data
Input voltage: 230 V AC
Battery connection: 1.5 m black and red cable to DC plug
Incl. battery terminals and M8 ring cable lug
With CEE 7/7 connection (Schuko): 1.5 m
The SmartShunt is an all-in-one battery monitor that uses your phone as a display. The SmartShunt connects via Bluetooth to the VictronConnect app on your phone (or tablet), allowing you to conveniently read all monitored battery parameters, such as state of charge, remaining time, historical information and much more.Alternatively, the SmartShunt can be connected and read by a GX device. The connection to the SmartShunt is made via a VE.Direct cable.The SmartShunt is a good alternative to a BMV battery monitor, especially for systems where battery monitoring is required but less wiring and chaos are desired. The SmartShunt is equipped with Bluetooth, a VE.Direct connection and a connection that can be used for monitoring a second battery, monitoring the midpoint or connecting a temperature sensor. Input voltage: 6.5 – 70 V DC.
IUoU battery chargers with gel, AGMGentle charging of 12 V batteries with optimised 6-stage IUoU charging technology and LI charging curveSimultaneous charging of two batteries plus starter batteryIncl. bus interface as standard for smooth integration into existing bus systemsTechnical specifications:Input voltage: 90 – 260 VFrequency: 50 – 60 HzFinal charging voltage: 14.4/14.7 VTrickle charging voltage: 13.8 VUo phase limitation: at 8 or 16 hoursEnergy efficiency: up to 92%Operating temperature: -20 to +50 °CUseful extensions: remote control, battery sensor from Hella, temperature sensor
This battery sensor measures the RMS current and the voltage of the connected battery and then calculates both capacity and charging status. It gives a warning signal if the battery is empty or defective and alerts you once it should be removed from the circuit. A useful accessory for the automatic charger Dometic PerfectCharge.
The Blue Smart IP65 charger is the new professional battery charger with built-in Bluetooth! It can be used with devices in your workshop or with motor vehicles such as (classic) cars, motorbikes, boats and motorhomes.
The seven-stage charging algorithm gets the best out of your battery. The charger provides the battery with the energy it needs, keeps it in a healthy condition, ensures better performance ... and a longer life.
Unlike other brands, the Blue Smart IP65 charger will attempt to recharge a deeply discharged battery by forcing a weak charging current onto it. Normal charging will then resume as soon as there is sufficient voltage between the battery terminals.
The charger is supplied with both crocodile clips and M8 cable lugs, making it very easy to connect to the battery. You can leave the device connected at all times if you wish.
The Blue Smart IP65 charger has built-in Bluetooth. This allows you to check the status of the charger and the battery on a smartphone, tablet or laptop. All charger settings can be configured using the VictronConnect app.
Technical data
Input voltage: 230 V AC
Battery connection: 1.5 m black and red cable to DC plug
Incl. battery terminals and M8 ring cable lug
With CEE 7/7 connection (Schuko): 1.5 m
The Solara charge controller SR85TL is the perfect solution to efficiently and gently charge your batteries. With a regulated charging characteristic specifically tailored to the respective battery type, this single-circuit controller ensures maximum reliability and modern technology at minimal cost.
The PowerUnit enables the simple and safe combination of an MT lithium power battery with the existing RV battery (AGM/gel/liquid acid). The combination of both battery systems offers a number of advantages:
Simple installation
Considerably more capacity
High current draw possible
The vehicle can finally be used independently.
Temperature-independent system
Extremely long service life of the entire battery system
No need to convert the on-board electronics to lithium
Both battery systems are connected with the enclosed cable set. The system is monitored and controlled by the battery computer control. This is connected to the BMS (Battery Management System) of the lithium battery and prevents further charging by the existing charging systems if the lithium battery is fully charged but the charging systems still need to charge the installed RV battery further due to its AGM or gel characteristic curve. In addition, the battery computer displays the total available capacity of the entire battery system in the interior.
Scope of delivery: LiFePO4 battery MT LI 85, battery computer control including Hall sensor and control box, connecting cables (2 x 400 mm; 1 x 800 mm; 35 mm²) for parallel connection, fuse set
The battery pack AP18650 includes a standard 18650 Li-Ion 3.7 V/2.5 Ah battery for reliable performance. It can be conveniently and quickly charged via USB-C. The 18650 Li-Ion battery is the perfect companion for mobile applications, ensuring that your devices are always ready for use. With integrated charging and discharging intelligence.
The Solara SR350DUO is a PWM dual-circuit charge controller specifically designed for the simultaneous charging of two independent batteries, such as the starter and supply battery. It operates in 12 V and 24 V systems and supports solar panels with a power output of up to 350 W and a maximum charging current of 20 A.
IUoU battery chargers with gel, AGMGentle charging of 12 V batteries with optimised 6-stage IUoU charging technology and LI charging curveSimultaneous charging of two batteries plus starter batteryIncl. bus interface as standard for smooth integration into existing bus systemsTechnical specifications:Input voltage: 90 – 260 VFrequency: 50 – 60 HzFinal charging voltage: 14.4/14.7 VTrickle charging voltage: 13.8 VUo phase limitation: at 8 or 16 hoursEnergy efficiency: up to 92%Operating temperature: -20 to +50 °CUseful extensions: remote control, battery sensor from Hella, temperature sensor
Universal AC-DC Charger
The chargers from the SMART CHARGER series are equipped with state-of-the-art microprocessor technology to meet the demands of daily use. It is e.g. suitable for motorcycles, cars, etc. Depending on the model, up to 9 charging stages can be completed. During battery diagnosis, it is checked whether the battery is capable of accepting and holding the charge.
The desulphation helps to keep the plates free from sulphate deposits, which extends the service life of the batteries. The maintenance charge (state-of-the-art) ensures that the performance of the batteries remains at 95 – 100%. Thanks to the included connection cables with crocodile clips and ring terminals (not SCS15 and SCS25), the Dometic NDS Smart Chargers are suitable for mobile use and fixed installation. Maintenance of batteries for seasonal vehicles during the winter months, built-in charger for e.g. manoeuvring aids (from Dometic NDS SCS8).
Main features:
Also suitable for LiFePO4 batteries from SCS4
New Opticharge algorithm
Selectable charging curves
Up to 9 charging stages
Protection class IP65
Incl. connection cables with ring terminals (not SCS15 and SCS 25) for fixed installation and crocodile clips for mobile use
OPTICHARGE, the new algorithm from the NDS software team for always ready and healthy batteries: The charging is optimised based on the technical specifications selected by NDS specialists. Voltage and current supply are continuously monitored.
The Solara SR340E is a PWM charge controller specifically designed for use in 12 V or 24 V systems. It supports solar installations with a power output of up to 340 W and a maximum charging current of 20 A. The controller automatically adjusts the correct voltage (12 V or 24 V) for the battery system.
The battery charger LAS 1218 BUS, a compact and lightweight primary-phase switched power supply unit without fan, offers high charging currents for electronic block systems with SDT-BUS compatibility and temperature sensor. It supports lead-acid, lead-gel and AGM batteries and ensures a constant charging current even with mains voltage fluctuations. The device can also be used as a power supply without a battery, enables recharging of the starter battery up to 3 A, is up to 80% lighter than comparable thyristor chargers and is characterised by a high efficiency of around 90% without ripple voltage.
Can be used fully automatically to supply voltage to AGM and gel batteries
Fanless, TÜV, GS symbol
Charging according to IUoU characteristics (max. charging voltage 14.4 V and 14.7 V; max. 14.8 V controllable)
The Blue Smart IP65 charger is the new professional battery charger with built-in Bluetooth! It can be used with devices in your workshop or with motor vehicles such as (classic) cars, motorbikes, boats and motorhomes.
The seven-stage charging algorithm gets the best out of your battery. The charger provides the battery with the energy it needs, keeps it in a healthy condition, ensures better performance ... and a longer life.
Unlike other brands, the Blue Smart IP65 charger will attempt to recharge a deeply discharged battery by forcing a weak charging current onto it. Normal charging will then resume as soon as there is sufficient voltage between the battery terminals.
The charger is supplied with both crocodile clips and M8 cable lugs, making it very easy to connect to the battery. You can leave the device connected at all times if you wish.
The Blue Smart IP65 charger has built-in Bluetooth. This allows you to check the status of the charger and the battery on a smartphone, tablet or laptop. All charger settings can be configured using the VictronConnect app.
Technical data
Input voltage: 230 V AC
Battery connection: 1.5 m black and red cable to DC plug
Incl. battery terminals and M8 ring cable lug
With CEE 7/7 connection (Schuko): 1.5 m
Multi-port: charges up to 3 devices simultaneously via 2 USB-C and 1 USB-A port.
65 W fast charging: perfect for MacBook Pro 14, Samsung S24 Ultra or Google Pixel Book.
Compact: 48% smaller thanks to GaN technology.
Universally compatible: for smartphones, tablets and USB-C laptops such as MacBook Air/Pro, ThinkPad, Surface.
Scope of delivery: charger, 100 W USB-C cable, manual, 18 months warranty.
Combination chargerDevice combination consisting of a mains charger, a charging converter (booster) and an MPP solar controller for complete energy supply in your motorhome. The batteries are automatically charged at all times, be it during travel or at a parking spot. Especially the generously dimensioned charging capacity of the integrated charging converter, with 30, 45 or 60 A, ensures that even during short trips, the RV battery is charged with full current and is fully charged upon arrival at your destination.