All-round charger with professional featuresThe charger MXS 5.0 is equipped with the latest technology, which previously was only reserved for CTEK professional units. This charger solves plenty of battery problems; it is perfect for those with the highest demands.Battery capacity: 1.2 – 110 Ah, up to 160 Ah for trickle chargingFunctions:COLD/AGM: charging in cold weather and charging AGM batteriesRECOND: maintenance charging of deeply discharged batteriesAUTO: fully automatic for optimal charging12 V: for all lead-acid batteriesStep 7: fully charged batteryStep 8: maintenance charge

MT03066, LiFePO4-compatible: the standby charger Pro protects the starter battery from deep discharge caused by standby consumers such as alarm systems or radios. It continuously monitors the RV and starter batteries and feeds excess charging current, for example from solar panels, into the starter battery. Suitable for all RV batteries, including modern LiFePO4 batteries, the standby charger Pro is ideal for off-grid camping or extended periods of inactivity.

The Blue Smart IP65 charger is the new professional battery charger with built-in Bluetooth! It can be used with devices in your workshop or with motor vehicles such as (classic) cars, motorbikes, boats and motorhomes. The seven-stage charging algorithm gets the best out of your battery. The charger provides the battery with the energy it needs, keeps it in a healthy condition, ensures better performance ... and a longer life. Unlike other brands, the Blue Smart IP65 charger will attempt to recharge a deeply discharged battery by forcing a weak charging current onto it. Normal charging will then resume as soon as there is sufficient voltage between the battery terminals. The charger is supplied with both crocodile clips and M8 cable lugs, making it very easy to connect to the battery. You can leave the device connected at all times if you wish. The Blue Smart IP65 charger has built-in Bluetooth. This allows you to check the status of the charger and the battery on a smartphone, tablet or laptop. All charger settings can be configured using the VictronConnect app. Technical data Input voltage: 230 V AC Battery connection: 1.5 m black and red cable to DC plug Incl. battery terminals and M8 ring cable lug With CEE 7/7 connection (Schuko): 1.5 m

For compensating frame edges. For Mover XT, SX, smart.

The SmartShunt is an all-in-one battery monitor that uses your phone as a display. The SmartShunt connects via Bluetooth to the VictronConnect app on your phone (or tablet), allowing you to conveniently read all monitored battery parameters, such as state of charge, remaining time, historical information and much more.Alternatively, the SmartShunt can be connected and read by a GX device. The connection to the SmartShunt is made via a VE.Direct cable.The SmartShunt is a good alternative to a BMV battery monitor, especially for systems where battery monitoring is required but less wiring and chaos are desired. The SmartShunt is equipped with Bluetooth, a VE.Direct connection and a connection that can be used for monitoring a second battery, monitoring the midpoint or connecting a temperature sensor. Input voltage: 6.5 – 70 V DC.

IUoU battery chargers with gel, AGMGentle charging of 12 V batteries with optimised 6-stage IUoU charging technology and LI charging curveSimultaneous charging of two batteries plus starter batteryIncl. bus interface as standard for smooth integration into existing bus systemsTechnical specifications:Input voltage: 90 – 260 VFrequency: 50 – 60 HzFinal charging voltage: 14.4/14.7 VTrickle charging voltage: 13.8 VUo phase limitation: at 8 or 16 hoursEnergy efficiency: up to 92%Operating temperature: -20 to +50 °CUseful extensions: remote control, battery sensor from Hella, temperature sensor

This battery sensor measures the RMS current and the voltage of the connected battery and then calculates both capacity and charging status. It gives a warning signal if the battery is empty or defective and alerts you once it should be removed from the circuit. A useful accessory for the automatic charger Dometic PerfectCharge.

The Blue Smart IP65 charger is the new professional battery charger with built-in Bluetooth! It can be used with devices in your workshop or with motor vehicles such as (classic) cars, motorbikes, boats and motorhomes. The seven-stage charging algorithm gets the best out of your battery. The charger provides the battery with the energy it needs, keeps it in a healthy condition, ensures better performance ... and a longer life. Unlike other brands, the Blue Smart IP65 charger will attempt to recharge a deeply discharged battery by forcing a weak charging current onto it. Normal charging will then resume as soon as there is sufficient voltage between the battery terminals. The charger is supplied with both crocodile clips and M8 cable lugs, making it very easy to connect to the battery. You can leave the device connected at all times if you wish. The Blue Smart IP65 charger has built-in Bluetooth. This allows you to check the status of the charger and the battery on a smartphone, tablet or laptop. All charger settings can be configured using the VictronConnect app. Technical data Input voltage: 230 V AC Battery connection: 1.5 m black and red cable to DC plug Incl. battery terminals and M8 ring cable lug With CEE 7/7 connection (Schuko): 1.5 m

Truma charger BC 10 incl. cable, sensor and circuit breaker. Without battery.

The Solara charge controller SR85TL is the perfect solution to efficiently and gently charge your batteries. With a regulated charging characteristic specifically tailored to the respective battery type, this single-circuit controller ensures maximum reliability and modern technology at minimal cost.

Mandatory for reinforcing frames of caravans with a frame thickness of less than 2.8 mm! For Mover XT, SX, smart.

The PowerUnit enables the simple and safe combination of an MT lithium power battery with the existing RV battery (AGM/gel/liquid acid). The combination of both battery systems offers a number of advantages: Simple installation Considerably more capacity High current draw possible The vehicle can finally be used independently. Temperature-independent system Extremely long service life of the entire battery system No need to convert the on-board electronics to lithium Both battery systems are connected with the enclosed cable set. The system is monitored and controlled by the battery computer control. This is connected to the BMS (Battery Management System) of the lithium battery and prevents further charging by the existing charging systems if the lithium battery is fully charged but the charging systems still need to charge the installed RV battery further due to its AGM or gel characteristic curve. In addition, the battery computer displays the total available capacity of the entire battery system in the interior. Scope of delivery: LiFePO4 battery MT LI 85, battery computer control including Hall sensor and control box, connecting cables (2 x 400 mm; 1 x 800 mm; 35 mm²) for parallel connection, fuse set

Set of 2 clamping plates for chassis with a U-profile frame.

The battery pack AP18650 includes a standard 18650 Li-Ion 3.7 V/2.5 Ah battery for reliable performance. It can be conveniently and quickly charged via USB-C. The 18650 Li-Ion battery is the perfect companion for mobile applications, ensuring that your devices are always ready for use. With integrated charging and discharging intelligence.

Short-term peak power 1000 W; outputs (9): AC, DC, USB-A, USB-C, car.

Want to start your holiday relaxed? That is what the all-round carefree energy package is for.

The Solara SR350DUO is a PWM dual-circuit charge controller specifically designed for the simultaneous charging of two independent batteries, such as the starter and supply battery. It operates in 12 V and 24 V systems and supports solar panels with a power output of up to 350 W and a maximum charging current of 20 A.

Obligatory for Dyonic chassis with < 2.8 mm frame thickness.

Short-term peak power 3600 W; outputs (13): 4 x AC, 2 x DC, 2 x USB-A, 2 x USB-A Fast Charger, 2 x USB-C, car.

IUoU battery chargers with gel, AGMGentle charging of 12 V batteries with optimised 6-stage IUoU charging technology and LI charging curveSimultaneous charging of two batteries plus starter batteryIncl. bus interface as standard for smooth integration into existing bus systemsTechnical specifications:Input voltage: 90 – 260 VFrequency: 50 – 60 HzFinal charging voltage: 14.4/14.7 VTrickle charging voltage: 13.8 VUo phase limitation: at 8 or 16 hoursEnergy efficiency: up to 92%Operating temperature: -20 to +50 °CUseful extensions: remote control, battery sensor from Hella, temperature sensor

Universal AC-DC Charger The chargers from the SMART CHARGER series are equipped with state-of-the-art microprocessor technology to meet the demands of daily use. It is e.g. suitable for motorcycles, cars, etc. Depending on the model, up to 9 charging stages can be completed. During battery diagnosis, it is checked whether the battery is capable of accepting and holding the charge. The desulphation helps to keep the plates free from sulphate deposits, which extends the service life of the batteries. The maintenance charge (state-of-the-art) ensures that the performance of the batteries remains at 95 – 100%. Thanks to the included connection cables with crocodile clips and ring terminals (not SCS15 and SCS25), the Dometic NDS Smart Chargers are suitable for mobile use and fixed installation. Maintenance of batteries for seasonal vehicles during the winter months, built-in charger for e.g. manoeuvring aids (from Dometic NDS SCS8). Main features: Also suitable for LiFePO4 batteries from SCS4 New Opticharge algorithm Selectable charging curves Up to 9 charging stages Protection class IP65 Incl. connection cables with ring terminals (not SCS15 and SCS 25) for fixed installation and crocodile clips for mobile use OPTICHARGE, the new algorithm from the NDS software team for always ready and healthy batteries: The charging is optimised based on the technical specifications selected by NDS specialists. Voltage and current supply are continuously monitored.

The Solara SR340E is a PWM charge controller specifically designed for use in 12 V or 24 V systems. It supports solar installations with a power output of up to 340 W and a maximum charging current of 20 A. The controller automatically adjusts the correct voltage (12 V or 24 V) for the battery system.

The battery charger LAS 1218 BUS, a compact and lightweight primary-phase switched power supply unit without fan, offers high charging currents for electronic block systems with SDT-BUS compatibility and temperature sensor. It supports lead-acid, lead-gel and AGM batteries and ensures a constant charging current even with mains voltage fluctuations. The device can also be used as a power supply without a battery, enables recharging of the starter battery up to 3 A, is up to 80% lighter than comparable thyristor chargers and is characterised by a high efficiency of around 90% without ripple voltage.

Can be used fully automatically to supply voltage to AGM and gel batteries Fanless, TÜV, GS symbol Charging according to IUoU characteristics (max. charging voltage 14.4 V and 14.7 V; max. 14.8 V controllable)

The Blue Smart IP65 charger is the new professional battery charger with built-in Bluetooth! It can be used with devices in your workshop or with motor vehicles such as (classic) cars, motorbikes, boats and motorhomes. The seven-stage charging algorithm gets the best out of your battery. The charger provides the battery with the energy it needs, keeps it in a healthy condition, ensures better performance ... and a longer life. Unlike other brands, the Blue Smart IP65 charger will attempt to recharge a deeply discharged battery by forcing a weak charging current onto it. Normal charging will then resume as soon as there is sufficient voltage between the battery terminals. The charger is supplied with both crocodile clips and M8 cable lugs, making it very easy to connect to the battery. You can leave the device connected at all times if you wish. The Blue Smart IP65 charger has built-in Bluetooth. This allows you to check the status of the charger and the battery on a smartphone, tablet or laptop. All charger settings can be configured using the VictronConnect app. Technical data Input voltage: 230 V AC Battery connection: 1.5 m black and red cable to DC plug Incl. battery terminals and M8 ring cable lug With CEE 7/7 connection (Schuko): 1.5 m

Multi-port: charges up to 3 devices simultaneously via 2 USB-C and 1 USB-A port. 65 W fast charging: perfect for MacBook Pro 14, Samsung S24 Ultra or Google Pixel Book. Compact: 48% smaller thanks to GaN technology. Universally compatible: for smartphones, tablets and USB-C laptops such as MacBook Air/Pro, ThinkPad, Surface. Scope of delivery: charger, 100 W USB-C cable, manual, 18 months warranty.

Combination chargerDevice combination consisting of a mains charger, a charging converter (booster) and an MPP solar controller for complete energy supply in your motorhome. The batteries are automatically charged at all times, be it during travel or at a parking spot. Especially the generously dimensioned charging capacity of the integrated charging converter, with 30, 45 or 60 A, ensures that even during short trips, the RV battery is charged with full current and is fully charged upon arrival at your destination.

Adjustable charging current 0.8 A or 3.8 AAdjustable charging voltage 14.4 V or 14.7 VCharge according to IUoU characteristicsPolarised and short-circuit protectedMemory function: last settings are savedDust-tight and splash-proof (IP65)Lightweight

Gentle charging of 24 V batteries with optimised 6-stage IUoU charging technologySimultaneous charging of two batteries plus a starter batteryIncl. bus interface as standard for seamless integration into existing bus systemsTechnical specifications:Input voltage: 90 – 260 VFrequency: 50 – 60 HzFinal charging voltage: 28.8/29.4 VMaintenance charging voltage: 27.6 VUo-phase limitation: at 8 or 16 hEnergy efficiency: up to 92%Operating temperature: -20 to +50 °CUseful extensions: remote control, battery sensor from Hella, temperature sensor

Universal AC-DC Charger The chargers from the SMART CHARGER series are equipped with state-of-the-art microprocessor technology to meet the demands of daily use. It is e.g. suitable for motorcycles, cars, etc. Depending on the model, up to 9 charging stages can be completed. During battery diagnosis, it is checked whether the battery is capable of accepting and holding the charge. The desulphation helps to keep the plates free from sulphate deposits, which extends the service life of the batteries. The maintenance charge (state-of-the-art) ensures that the performance of the batteries remains at 95 – 100%. Thanks to the included connection cables with crocodile clips and ring terminals (not SCS15 and SCS25), the Dometic NDS Smart Chargers are suitable for mobile use and fixed installation. Maintenance of batteries for seasonal vehicles during the winter months, built-in charger for e.g. manoeuvring aids (from Dometic NDS SCS8). Main features: Also suitable for LiFePO4 batteries from SCS4 New Opticharge algorithm Selectable charging curves Up to 9 charging stages Protection class IP65 Incl. connection cables with ring terminals (not SCS15 and SCS 25) for fixed installation and crocodile clips for mobile use OPTICHARGE, the new algorithm from the NDS software team for always ready and healthy batteries: The charging is optimised based on the technical specifications selected by NDS specialists. Voltage and current supply are continuously monitored.

The Blue Smart IP65 charger is the new professional battery charger with built-in Bluetooth! It can be used with devices in your workshop or with motor vehicles such as (classic) cars, motorbikes, boats and motorhomes. The seven-stage charging algorithm gets the best out of your battery. The charger provides the battery with the energy it needs, keeps it in a healthy condition, ensures better performance ... and a longer life. Unlike other brands, the Blue Smart IP65 charger will attempt to recharge a deeply discharged battery by forcing a weak charging current onto it. Normal charging will then resume as soon as there is sufficient voltage between the battery terminals. The charger is supplied with both crocodile clips and M8 cable lugs, making it very easy to connect to the battery. You can leave the device connected at all times if you wish. The Blue Smart IP65 charger has built-in Bluetooth. This allows you to check the status of the charger and the battery on a smartphone, tablet or laptop. All charger settings can be configured using the VictronConnect app. Technical data Input voltage: 230 V AC Battery connection: 1.5 m black and red cable to DC plug Incl. battery terminals and M8 ring cable lug With CEE 7/7 connection (Schuko): 1.5 m

The DELTA Pro 3 power stations for indoor and outdoor use are particularly powerful and therefore perfect for both at home and outings. Thanks to the wheels, the power station is easy to transport, allowing you to power your devices effortlessly. Thanks to the various outputs, it can be adapted to all your devices – be it a mobile phone, a laptop or a household appliance. With X-Stream technology, the models can be charged from 0 to 80% in just one hour. At home, the batteries of the DELTA Pro 3 series transform into eco-friendly backup power supplies. Thanks to the high storage capacity, you can power your devices at home for several hours in the event of a power outage. Sustainable and environmentally friendly with renewable energy.Short-term peak power 8000 W; outputs (11): 5 x AC, 2 x DC, 2 x USB-A Fast Charger, 2 x USB-C.Scope of delivery: EcoFlow DELTA Pro 3 portable power station, quick guide, safety instructions, EcoFlow AC charging cable, handle protector.

Consists of: Optima® YT S 4.2 Battery Charger BC 10 (10 A) Disconnector Easy click® pole clamps (fix installation) Additional charging cable for flexible charging Temperature sensor and bracket Weight: 19.5 kg (battery) Mover SX: 35 kg System weight: 54.5 kg Mover smart A: 32 kg System weight 51.5 kg Mover smart M: 33 kg System weight 52.5 kg Mover XT: 60 kg System weight 79.5 kg

For compensating the frame height. Content: 2 sets.

Short-term peak power 600 W; outputs (9): AC, DC, USB-A, USB-A Fast Charge, USB-C, car.

Consists of: Optima® YT S 5.5 Battery Charger BC 10 (10 A) Disconnector Easy click® pole clamps (fixed installation) Additional charging cable for flexible charging Temperature sensor Weight: 26.5 kg (battery)Mover smart A4: 64 kg System weight 90.5 kg

Starter batteries and supply batteries are designed for different tasks. To start the engine, starter batteries must initially supply a high current and then serve as an energy buffer with smaller partial cycles. Supply or RV batteries, in contrast, are discharged at lower currents over longer periods of time and then charged again. This means they are subjected to considerably higher loads. These characteristics must be taken into account and require special charging technology to avoid damage and to guarantee a long service life. The IUoU battery chargers use a unique six-stage charging cycle. They provide optimum charging for all gel, AGM and wet batteries because they charge quickly and gently at the same time.The necessary charging voltage for lithium batteries with BMS (battery management system) can be set via DIP switches. This way, lithium batteries can be optimally charged with MCA chargers.Gentle charging of 12 V batteries with optimised 6-stage IUoU charging technologyVery compact and lightweight design, easy installationSleep mode for quiet charging at half the power – ideal at night or in parking spaces with low electrical circuit protectionComes as standard with a bus interface for smooth integration into existing bus systemsCompatible with the Dometic MPC 01 battery controller for perfect power managementUseful additions: remote control, Hella battery sensor, temperature sensor6-stage IUoU charging characteristicI phase: At the beginning of the charging process, the empty battery is charged with constant current (100% charging current) until the battery voltage reaches the charging voltage.Uo phase: The 3-stage absorption charging phase (Uo phase) begins. The duration depends on the battery. The voltage remains constant (Uo). In the first two minutes, the charge of the battery is determined. Then, the main charging phase begins, during which the battery is fully charged. When the battery is fully charged or the charging current is below 6% of the nominal charging current for 15 minutes, the Uo phase is completed.U phase: The charger switches to trickle charging. Conditioning: Every 12 days, the charger switches back to phase 1 to revive the battery and prevent sulphation.

Short-term peak power 3600 W; solar input 500 W; outputs (11): 4 x AC, 2 x DC, 2 x USB-A, 2 x USB-C, car.

Short-term peak power 1600 W; outputs (9): AC, DC, USB-A, USB-C, car.

Incl. connection cable to the powerstation.

Short-term peak power 7200 W; outputs: 4 x AC, 2 x DC, 2 x USB-A, 2 x USB-A Fast Charge, 2 x USB-C, 1 x car.

This temperature sensor is perfect for charging batteries in changing or extreme ambient temperatures. For optimal charging, Dometic PerfectCharge MCA-TS1 adjusts the charging voltage to the battery temperature. In high temperatures, the charging voltage is reduced to prevent battery gassing. In lower temperatures, it is increased to guarantee that the battery is charged completely.

Short-term peak power 3600 W; solar input 1000 W; outputs (11): 4 x AC, 2 x DC, 2 x USB-A, 2 x USB-C, car.

Set of 2 adapter kits for Hymer Eriba Troll models with a square tube frame and L-profile.

Microprocessor-controlled universal HF charging device in a compact housing. Suitable for LiFePO4/LiFeYPO4 Li-Ion as well as for AGM, gel and wet batteries. Safe, fast and yet gentle charging with automatic soft start function. Enjoy a battery that is always charged as long as it is connected to the charger. The restart function automatically starts the recharge process as soon as the battery voltage is dropping. Thanks to the automatic wake-up function, batteries with a battery management system in "sleep mode" are reactivated without any problems. The 6 LEDs allow an easy indication of charging and operating condition as well as error messages. Equipped with temperature control sensor input. Suitable for: LiFePO4, wet, gel, AGM, AGM² – 13.5 V LiFePO4 mode: 14.4 V, automatic restart at U < 13.3 V Automatic wake up function: automatic waking up of deep-discharge batteries Charging periods: pre-charge, soft start and constant current Charging current monitor/safety timer: to end CV phase. Auto-restart: after voltage drop Passively cooled, silent Power supply mode: 13.5 V Scope of delivery: charger, manual, clamps, M8 cable lugs.

The SmartShunt is an all-in-one battery monitor that uses your phone as a display. The SmartShunt connects via Bluetooth to the VictronConnect app on your phone (or tablet), allowing you to conveniently read all monitored battery parameters, such as state of charge, remaining time, historical information and much more.Alternatively, the SmartShunt can be connected and read by a GX device. The connection to the SmartShunt is made via a VE.Direct cable.The SmartShunt is a good alternative to a BMV battery monitor, especially for systems where battery monitoring is required but less wiring and chaos are desired. The SmartShunt is equipped with Bluetooth, a VE.Direct connection and a connection that can be used for monitoring a second battery, monitoring the midpoint or connecting a temperature sensor. Input voltage: 6.5 – 70 V DC.

Installation kit to complement the rectangular profile. For installation on a chassis with rectangular profile. For Mover XT, SX, smart.

Blue Smart IP22 Charger is the new professional battery charger with built-in Bluetooth! Blue Smart IP22 Charger can be used with devices in your workshop or with motor vehicles such as (classic) cars, motorbikes, boats and motorhomes. The wireless solution for monitoring voltage and current, changing settings and updating the charger when new functions are available. With an efficiency of up to 94%, these chargers generate up to four times less heat compared to the industry standard. The Blue Smart Charger has a microprocessor-controlled "adaptive" battery management system. The adaptive function automatically optimises the charging process depending on the way the battery is used.