This ventilation system is ideal for RV HVAC systems, dryers, greenhouses and more, as it transports fresh air for heating and cooling purposes. It offers intelligent speed control with 6 manual levels, automatic temperature control and a timer. The fans switch off below 20 °C and automatically adjust their speed between 20 °C and 45 °C. Above 45 °C, they run at maximum speed. With an IP55 certification, it is waterproof and suitable for all environments. Incl. two steel pipe clamps for ø 60 mm pipes and rectifier.

This special cable ensures that all N-BUS-compatible convenience devices on board your vehicle are connected to each other in a common network. This allows you to monitor or control your devices through a single interface. The devices, in turn, can exchange their data with each other, ensuring better energy management.

Many Euro 5 and almost all Euro 6 vehicles are equipped with an intelligent alternator. The function of 12 V isolating relays and D+ simulators is now only partially possible. A charging booster or BCB must be installed for charging the RV battery/batteries. After the engine stops, the relay disconnects the starter and the RV battery. Switching current (max.) 70 A.

Recessed socket IP54 with cover. Operating voltage: 12 V/24 V DC, output power: 5 V DC, 3.6 A. Integrated voltage converter. Ideal for charging USB-enabled devices with high charging current requirements.

With the FLY 2.5 mm² PVC vehicle cable (NO7V-K), you can determine the required cable length yourself – ideal for flexible applications such as connecting batteries, inverters or battery chargers. Simply cut to the desired length and perfectly tailor it to your needs.

The cable reel 4 mm² (FLY 4 mm² PVC vehicle cable NO7V-K) offers versatile applications, e.g. for connecting batteries, inverters or battery chargers. The flexible cable can be cut to size individually, thus perfectly adapting to your requirements. Ideal for applications where precise adjustments are necessary.

Cable set for connecting the inverter to the battery. Consists of 2 cables with 1.5 m each; 95 mm².

The digital control panel for interior monitoring of the inverter/charger combinations ICC 1600 and ICC 3000 with various setting options. The display shows charging current, voltage, battery temperature and charging status. Depending on the operating mode, the connected ICC can be switched on and off or put into night mode / Eco mode. Additionally, it is possible to adjust the input current limit to the existing fuse protection of the interior 230 V mains input. This prevents the fuse from being tripped if your parking spot is only weakly fused.

The FLY 1.5 mm² PVC vehicle cable (NO7V-K) is ideally suited for electrical installations in vehicles and versatile wiring projects. Thanks to its fine-stranded and flexible nature, it is easy to install. With a robust PVC insulation, it ensures a reliable power supply and durability. The cable is supplied in a convenient 100-metre reel, providing ample material for a variety of applications.

The main tasks of the Victron battery monitor are to measure the charging and discharging currents and to calculate the state of charge and the remaining battery life. If certain limits are exceeded (such as excessive discharge), an alarm is sent out. The battery monitor can also exchange data with the Victron Global Remote. This also applies to the sending of alarms.

The FLY 1.5 mm² PVC vehicle cable (NO7V-K) is ideally suited for electrical installations in vehicles and versatile wiring projects. Thanks to its fine-stranded and flexible nature, it is easy to install. With a robust PVC insulation, it ensures a reliable power supply and durability. The cable is supplied in a convenient 100-metre reel, providing ample material for a variety of applications.

Blade-type fuse set Micro 2 for many common vehicle types, 8 pieces.3 – 30 AOne piece each: 3/5/7.5/10/15/20/25/30 AMaterial: zinc alloy and plasticPackaging: blister card

The Solara charge controller SR85TL is the perfect solution to efficiently and gently charge your batteries. With a regulated charging characteristic specifically tailored to the respective battery type, this single-circuit controller ensures maximum reliability and modern technology at minimal cost.

Interface for the integration of CI-Bus, CAN-Bus and UART devices. Easy installation. It integrates e.g. heating or air conditioning into the REVOTION system. Nominal voltage: 6 – 36 V;

The universal cable with a cross-section of 70 mm² is required for connecting batteries, inverters or battery chargers. The colours can be used to distinguish the poles. With the 10 m cable, you can decide for yourself what length you need. Outer material (insulation) TM2. Cable type: ELFLEX.

The battery pack AP18650 includes a standard 18650 Li-Ion 3.7 V/2.5 Ah battery for reliable performance. It can be conveniently and quickly charged via USB-C. The 18650 Li-Ion battery is the perfect companion for mobile applications, ensuring that your devices are always ready for use. With integrated charging and discharging intelligence.

Can be integrated as an additional power fuse into the cable set already supplied as standard (incl. fuse).

The Solara SR350DUO is a PWM dual-circuit charge controller specifically designed for the simultaneous charging of two independent batteries, such as the starter and supply battery. It operates in 12 V and 24 V systems and supports solar panels with a power output of up to 350 W and a maximum charging current of 20 A.

The USB-C™/USB-A 3.0 OTG SuperSpeed adapter allows you to quickly and straightforwardly connect USB-A devices and USB-C™ ports.

With the FLY 2.5 mm² PVC vehicle cable (NO7V-K), you can determine the required cable length yourself – ideal for flexible applications such as connecting batteries, inverters or battery chargers. Simply cut to the desired length and perfectly tailor it to your needs.

Capacity tester for more than 12 battery types. An LCD bar shows the exact remaining capacity of batteries and rechargeable batteries. For batteries and rechargeable batteries of sizes Micro (AAA), Mignon (AA), Baby (C), Mono (D), 9 V block (6LR61) CR-123, CR-2, 2CR5, CR-P2, CR-V3, 1.5 V and 3 V button cells, power supply 1 Micro.

Short-term peak power 3600 W; outputs (13): 4 x AC, 2 x DC, 2 x USB-A, 2 x USB-A Fast Charger, 2 x USB-C, car.

Base plate for surface mounting suitable for mounting on flammable surfaces.

The TBB Power MEH-B Power battery monitor displays all important battery data at a glance. It enhances the batteries with app control via Bluetooth. Additionally, the battery can be turned on and off using a remote switch. ONLY for TBB M12 batteries.