Truma Combi heaters combine heating and hot water functions in one device with an integrated stainless steel tank. They are lighter than their predecessors, consume less battery power and diesel, are easier to maintain and have an automatic altitude adjustment up to 3000 m as well as a standardised wall flue for both variants.Technical features include a heat output of up to 6000 W, 10 litre water capacity and efficient power consumption. The scope of delivery includes the heater, a room temperature sensor, Truma iNet X panel, control panel cable, fuel line, dosing pump and mounting parts. Water sets and tank connection sets as well as flue gas ducts must be ordered separately.Please note: Truma diesel heaters (Combi D and Combi D next generation) are approved for operation with HVO, XtL according to EN 15940 in pure form (e.g. HVO100, i.e. 100% hydrogenated vegetable oil) as well as their mixtures with pure fossil diesel fuel and B7.

These devices are specifically designed for use in recreational vehicles. They can be used where space is limited and only low current ratios with weak fusing are available.KB 3 (3 l, wall installation) and KB 6 (6 l, ground installation) are low-pressure boilers and can be connected with a hose to submersible pumps without a check valve or to any other water system with a suitable fitting. Heatable from approx. 35 °C to approx. 85 °C, mixable to approx. 3 times the quantity at full heating, less power consumption and fast reheating with good insulation. The boilers are made of high-quality plastic, heat- and corrosion-resistant. Quick and easy assembly with mounting bracket.Fast heatingLow-pressure boilerLow power consumptionFrost monitor for winter operationWater connection 10 mmTÜV-approved5 years warrantyScope of delivery: adjustable thermostat, frost monitor and overheating protection, 1 m cable.Mixing valve TT (not included) for adjusting the water temperature.

These devices are specifically designed for use in recreational vehicles. They can be used where space is limited and only low current ratios with weak fusing are available.KB 3 (3 l, wall installation) and KB 6 (6 l, ground installation) are low-pressure boilers and can be connected with a hose to submersible pumps without a check valve or to any other water system with a suitable fitting. Heatable from approx. 35 °C to approx. 85 °C, mixable to approx. 3 times the quantity at full heating, less power consumption and fast reheating with good insulation. The boilers are made of high-quality plastic, heat- and corrosion-resistant. Quick and easy assembly with mounting bracket.Fast heatingLow-pressure boilerLow power consumptionFrost monitor for winter operationWater connection 10 mmTÜV-approved5 years warrantyScope of delivery: adjustable thermostat, frost monitor and overheating protection, 1 m cable.Mixing valve TT (not included) for adjusting the water temperature.

Liquid gas heater with water heater, optionally with electric heater 230 V, 1800 W.Compact: light and space-saving heatingConvenient: easy to installCan be combined: automatic air conditioning possible in conjunction with Truma air conditioning systemFlexible: also available as a hybrid heater in the Combi E versionTechnical data:Heat output: 2000 W – 6000 WWater capacity: 10 lHeating of water from approx. 15 °C to approx. 60 °C: approx. 23 min.Power consumption 12 V: heating and hot water: 1.2 – 6.5 A; hot water: 0.5 APower consumption 230 V: 3.9 – 7.8 AScope of delivery: Combi heater with room temperature sensor, Truma iNet X panel, control panel cable 6 m and mounting parts (without exhaust system and without water connection set).Please order separately: water set (consists of FrostControl and elbow connectors) – optionally water set FC TB (fir tree connection) or the water set FC JG (John Guest) and exhaust system – e.g. wall flue set complete with 1.1 m exhaust pipe, 1 m feed pipe and clamps.

Truma Combi heaters combine heating and hot water functions in one device with an integrated stainless steel tank. They are lighter than their predecessors, consume less battery power and diesel, are easier to maintain and have an automatic altitude adjustment up to 3000 m as well as a standardised wall flue for both variants.Technical features include a heat output of up to 6000 W, 10 litre water capacity and efficient power consumption. The scope of delivery includes the heater, a room temperature sensor, Truma iNet X panel, control panel cable, fuel line, dosing pump and mounting parts. Water sets and tank connection sets as well as flue gas ducts must be ordered separately.Please note: Truma diesel heaters (Combi D and Combi D next generation) are approved for operation with HVO, XtL according to EN 15940 in pure form (e.g. HVO100, i.e. 100% hydrogenated vegetable oil) as well as their mixtures with pure fossil diesel fuel and B7.

These devices are specifically designed for use in recreational vehicles. They can be used where space is limited and only low current ratios with weak fusing are available.KB 3 (3 l, wall installation) and KB 6 (6 l, ground installation) are low-pressure boilers and can be connected with a hose to submersible pumps without a check valve or to any other water system with a suitable fitting. Heatable from approx. 35 °C to approx. 85 °C, mixable to approx. 3 times the quantity at full heating, less power consumption and fast reheating with good insulation. The boilers are made of high-quality plastic, heat- and corrosion-resistant. Quick and easy assembly with mounting bracket.Fast heatingLow-pressure boilerLow power consumptionFrost monitor for winter operationWater connection 10 mmTÜV-approved5 years warrantyScope of delivery: adjustable thermostat, frost monitor and overheating protection, 1 m cable.Mixing valve TT (not included) for adjusting the water temperature.

Liquid gas heater with water heater, optionally with electric heater 230 V, 1800 W.Compact: light and space-saving heatingConvenient: easy to installCan be combined: automatic air conditioning possible in conjunction with Truma air conditioning systemFlexible: also available as a hybrid heater in the Combi E versionTechnical data:Heat output: 2000 W – 6000 WWater capacity: 10 lHeating of water from approx. 15 °C to approx. 60 °C: approx. 23 min.Power consumption 12 V: heating and hot water: 1.2 – 6.5 A; hot water: 0.5 APower consumption 230 V: 3.9 – 7.8 AScope of delivery: Combi heater with room temperature sensor, Truma iNet X panel, control panel cable 6 m and mounting parts (without exhaust system and without water connection set).Please order separately: water set (consists of FrostControl and elbow connectors) – optionally water set FC TB (fir tree connection) or the water set FC JG (John Guest) and exhaust system – e.g. wall flue set complete with 1.1 m exhaust pipe, 1 m feed pipe and clamps.

These devices are specifically designed for use in recreational vehicles. They can be used where space is limited and only low current ratios with weak fusing are available.KB 3 (3 l, wall installation) and KB 6 (6 l, ground installation) are low-pressure boilers and can be connected with a hose to submersible pumps without a check valve or to any other water system with a suitable fitting. Heatable from approx. 35 °C to approx. 85 °C, mixable to approx. 3 times the quantity at full heating, less power consumption and fast reheating with good insulation. The boilers are made of high-quality plastic, heat- and corrosion-resistant. Quick and easy assembly with mounting bracket.Fast heatingLow-pressure boilerLow power consumptionFrost monitor for winter operationWater connection 10 mmTÜV-approved5 years warrantyScope of delivery: adjustable thermostat, frost monitor and overheating protection, 1 m cable.Mixing valve TT (not included) for adjusting the water temperature.

The Truma Combi heaters combine heating and hot water functions in one appliance and are equipped with an integrated stainless steel tank for water heating. Depending on the model, the hybrid heater offers flexibility in the energy source. Special features include fast heating with an output up to 6900 W, a compact design, easy installation and the option to combine with Truma air conditioning systems. Technical specifications include a heat output of 2000 W to 6000 W, 10 litre water capacity and various nominal heat outputs depending on the operating mode. The scope of delivery includes the Combi E heater with accessories, but without flue gas duct and water connection set, which are available separately. Truma Combi E models add an electric option to the classic functions.

The Truma Combi heaters combine heating and hot water functions in one appliance and are equipped with an integrated stainless steel tank for water heating. Depending on the model, the hybrid heater offers flexibility in the energy source. Special features include fast heating with an output up to 6900 W, a compact design, easy installation and the option to combine with Truma air conditioning systems. Technical specifications include a heat output of 2000 W to 6000 W, 10 litre water capacity and various nominal heat outputs depending on the operating mode. The scope of delivery includes the Combi E heater with accessories, but without flue gas duct and water connection set, which are available separately. Truma Combi E models add an electric option to the classic functions.