The heating rod is an original Truma spare part. Please check the manufacturer’s part number.

Truma Combi heaters combine heating and hot water functions in one device with an integrated stainless steel tank. They are lighter than their predecessors, consume less battery power and diesel, are easier to maintain and have an automatic altitude adjustment up to 3000 m as well as a standardised wall flue for both variants.Technical features include a heat output of up to 6000 W, 10 litre water capacity and efficient power consumption. The scope of delivery includes the heater, a room temperature sensor, Truma iNet X panel, control panel cable, fuel line, dosing pump and mounting parts. Water sets and tank connection sets as well as flue gas ducts must be ordered separately.Please note: Truma diesel heaters (Combi D and Combi D next generation) are approved for operation with HVO, XtL according to EN 15940 in pure form (e.g. HVO100, i.e. 100% hydrogenated vegetable oil) as well as their mixtures with pure fossil diesel fuel and B7.

These devices are specifically designed for use in recreational vehicles. They can be used where space is limited and only low current ratios with weak fusing are available.KB 3 (3 l, wall installation) and KB 6 (6 l, ground installation) are low-pressure boilers and can be connected with a hose to submersible pumps without a check valve or to any other water system with a suitable fitting. Heatable from approx. 35 °C to approx. 85 °C, mixable to approx. 3 times the quantity at full heating, less power consumption and fast reheating with good insulation. The boilers are made of high-quality plastic, heat- and corrosion-resistant. Quick and easy assembly with mounting bracket.Fast heatingLow-pressure boilerLow power consumptionFrost monitor for winter operationWater connection 10 mmTÜV-approved5 years warrantyScope of delivery: adjustable thermostat, frost monitor and overheating protection, 1 m cable.Mixing valve TT (not included) for adjusting the water temperature.

The Pundmann pressure boiler is available in 3-, 6- or 9-litre versions and heats water with a 180 W or 200 W heating element via a 12 V power supply. At a working pressure of 2.3 bar, the water stays warm for longer. The boiler automatically starts heating and switches off once the desired temperature is reached. Its compact design and ease of use make it a practical and functional device.Technical data: heating time: approx. 75 min./75 °C; water connection diameter 10 mm. Operating pressure: 2.3 bar; safety valve setting: 3.0 bar.

Truma Combi heaters combine heating and hot water functions in one appliance with an integrated stainless steel tank. They are characterised by a weight saving of 3 kg compared to older models, low consumption, a longer service life thanks to efficient combustion control, automatic altitude adjustment up to 3000 m and a uniform wall flue for all variants.Technical highlights include up to 6 combustion stages, a heat output of up to 6000 W, 10 litre water capacity and a water heating time of approx. 24 minutes. The scope of delivery includes the Combi D heater, a room temperature sensor, the Truma iNet X panel, a control panel cable, a fuel line, a dosing pump and mounting parts. Water sets and the tank connection set for Combi D as well as a wall flue set with flue gas pipe and feed pipe are available separately.Please note: Truma diesel heaters (Combi D and Combi D next generation) are approved for operation with HVO, XtL according to EN 15940 in pure form (e.g. HVO100, i.e. 100% hydrogenated vegetable oil) as well as their mixtures with pure fossil diesel fuel and B7.

For 10 mm hose systems.

The Pundmann pressure boiler is available in 3-, 6- or 9-litre versions and heats water with a 180 W or 200 W heating element via a 12 V power supply. At a working pressure of 2.3 bar, the water stays warm for longer. The boiler automatically starts heating and switches off once the desired temperature is reached. Its compact design and ease of use make it a practical and functional device.Technical data: heating time: approx. 75 min./75 °C; water connection diameter 10 mm. Operating pressure: 2.3 bar; safety valve setting: 3.0 bar.

The Pundmann pressure boiler is available in 3-, 6- or 9-litre versions and heats water with a 180 W or 200 W heating element via a 12 V power supply. At a working pressure of 2.3 bar, the water stays warm for longer. The boiler automatically starts heating and switches off once the desired temperature is reached. Its compact design and ease of use make it a practical and functional device.Technical data: heating time: approx. 75 min./75 °C; water connection diameter 10 mm. Operating pressure: 2.3 bar; safety valve setting: 3.0 bar.

Small and powerful: the Nautic water heaters for caravans, motorhomes, sales vehicles and boats present themselves in proven ELGENA quality. Nautic water heaters are a space-saving hot water supply with high-quality V4A stainless steel tank and compact insulation and fit even into the smallest of spaces. Nautic water heaters are pressure-resistant and can be fitted as standard or retrofitted to any cold water supply with a hose line. Water connection to a submersible pump, hand pump or foot pump as well as a pressure pump is possible. Robust insulation ensures that hot water is still available the next day.Thermostatically adjustable from 30 °C to 80 °C1 m connection cable with Schuko plugSafety valve up to 3 barWater drain valve for winter drainService water connectionOverheating protectionFrost monitorFloor mountingFor 12 V and 230 V

The heating rod is an original Truma spare part. Please check the manufacturer’s part number.

These devices are specifically designed for use in recreational vehicles. They can be used where space is limited and only low current ratios with weak fusing are available.KB 3 (3 l, wall installation) and KB 6 (6 l, ground installation) are low-pressure boilers and can be connected with a hose to submersible pumps without a check valve or to any other water system with a suitable fitting. Heatable from approx. 35 °C to approx. 85 °C, mixable to approx. 3 times the quantity at full heating, less power consumption and fast reheating with good insulation. The boilers are made of high-quality plastic, heat- and corrosion-resistant. Quick and easy assembly with mounting bracket.Fast heatingLow-pressure boilerLow power consumptionFrost monitor for winter operationWater connection 10 mmTÜV-approved5 years warrantyScope of delivery: adjustable thermostat, frost monitor and overheating protection, 1 m cable.Mixing valve TT (not included) for adjusting the water temperature.

Small and powerful: the Nautic water heaters for caravans, motorhomes, sales vehicles and boats present themselves in proven ELGENA quality. Nautic water heaters are a space-saving hot water supply with high-quality V4A stainless steel tank and compact insulation and fit even into the smallest of spaces. Nautic water heaters are pressure-resistant and can be fitted as standard or retrofitted to any cold water supply with a hose line. Water connection to a submersible pump, hand pump or foot pump as well as a pressure pump is possible. Robust insulation ensures that hot water is still available the next day.Thermostatically adjustable from 30 °C to 80 °C1 m connection cable with Schuko plugSafety valve up to 3 barWater drain valve for winter drainService water connectionOverheating protectionFrost monitorFloor mountingFor 12 V and 230 V

Liquid gas heater with water heater, optionally with electric heater 230 V, 1800 W.Compact: light and space-saving heatingConvenient: easy to installCan be combined: automatic air conditioning possible in conjunction with Truma air conditioning systemFlexible: also available as a hybrid heater in the Combi E versionTechnical data:Heat output: 2000 W – 6000 WWater capacity: 10 lHeating of water from approx. 15 °C to approx. 60 °C: approx. 23 min.Power consumption 12 V: heating and hot water: 1.2 – 6.5 A; hot water: 0.5 APower consumption 230 V: 3.9 – 7.8 AScope of delivery: Combi heater with room temperature sensor, Truma iNet X panel, control panel cable 6 m and mounting parts (without exhaust system and without water connection set).Please order separately: water set (consists of FrostControl and elbow connectors) – optionally water set FC TB (fir tree connection) or the water set FC JG (John Guest) and exhaust system – e.g. wall flue set complete with 1.1 m exhaust pipe, 1 m feed pipe and clamps.

Truma Combi heaters combine heating and hot water functions in one device with an integrated stainless steel tank. They are lighter than their predecessors, consume less battery power and diesel, are easier to maintain and have an automatic altitude adjustment up to 3000 m as well as a standardised wall flue for both variants.Technical features include a heat output of up to 6000 W, 10 litre water capacity and efficient power consumption. The scope of delivery includes the heater, a room temperature sensor, Truma iNet X panel, control panel cable, fuel line, dosing pump and mounting parts. Water sets and tank connection sets as well as flue gas ducts must be ordered separately.Please note: Truma diesel heaters (Combi D and Combi D next generation) are approved for operation with HVO, XtL according to EN 15940 in pure form (e.g. HVO100, i.e. 100% hydrogenated vegetable oil) as well as their mixtures with pure fossil diesel fuel and B7.

The Truma electric boiler heats the water in your caravan or motorhome quickly and keeps it warm for a long time. This way, you can always thoroughly wash your hands, do the dishes or even have a long, hot shower. The high-quality stainless steel container with extra high capacity makes this possible. At the same time, the electric boiler consumes little electricity and operates almost silently.Powerful heating element provides hot water in a short timeMinimal loss of heat thanks to high-quality insulationLow energy consumptionTechnical data: 14 l capacity, 230 V – 850 W, power consumption 3.7 A, heating time from 15 °C to 70 °C: approx. 70 min., pumping pressure: max. 2.8 bar, weight: 3 kg, dimensions (L x W x H) 405 x 405 x 295 mm. Thermal cutout: 70 °C.Scope of delivery: boiler, control panel, 3 m cable.

These devices are specifically designed for use in recreational vehicles. They can be used where space is limited and only low current ratios with weak fusing are available.KB 3 (3 l, wall installation) and KB 6 (6 l, ground installation) are low-pressure boilers and can be connected with a hose to submersible pumps without a check valve or to any other water system with a suitable fitting. Heatable from approx. 35 °C to approx. 85 °C, mixable to approx. 3 times the quantity at full heating, less power consumption and fast reheating with good insulation. The boilers are made of high-quality plastic, heat- and corrosion-resistant. Quick and easy assembly with mounting bracket.Fast heatingLow-pressure boilerLow power consumptionFrost monitor for winter operationWater connection 10 mmTÜV-approved5 years warrantyScope of delivery: adjustable thermostat, frost monitor and overheating protection, 1 m cable.Mixing valve TT (not included) for adjusting the water temperature.

Liquid gas heater with water heater, optionally with electric heater 230 V, 1800 W.Compact: light and space-saving heatingConvenient: easy to installCan be combined: automatic air conditioning possible in conjunction with Truma air conditioning systemFlexible: also available as a hybrid heater in the Combi E versionTechnical data:Heat output: 2000 W – 6000 WWater capacity: 10 lHeating of water from approx. 15 °C to approx. 60 °C: approx. 23 min.Power consumption 12 V: heating and hot water: 1.2 – 6.5 A; hot water: 0.5 APower consumption 230 V: 3.9 – 7.8 AScope of delivery: Combi heater with room temperature sensor, Truma iNet X panel, control panel cable 6 m and mounting parts (without exhaust system and without water connection set).Please order separately: water set (consists of FrostControl and elbow connectors) – optionally water set FC TB (fir tree connection) or the water set FC JG (John Guest) and exhaust system – e.g. wall flue set complete with 1.1 m exhaust pipe, 1 m feed pipe and clamps.

Small and powerful: the Nautic water heaters for caravans, motorhomes, sales vehicles and boats present themselves in proven ELGENA quality. Nautic water heaters are a space-saving hot water supply with high-quality V4A stainless steel tank and compact insulation and fit even into the smallest of spaces. Nautic water heaters are pressure-resistant and can be fitted as standard or retrofitted to any cold water supply with a hose line. Water connection to a submersible pump, hand pump or foot pump as well as a pressure pump is possible. Robust insulation ensures that hot water is still available the next day.Thermostatically adjustable from 30 °C to 80 °C1 m connection cable with Schuko plugSafety valve up to 3 barWater drain valve for winter drainService water connectionOverheating protectionFrost monitorFloor mountingFor 12 V and 230 V

The safety valve is urgently needed when using a Nautic Compact Air in vehicles with a pressurised water system.

These devices are specifically designed for use in recreational vehicles. They can be used where space is limited and only low current ratios with weak fusing are available.KB 3 (3 l, wall installation) and KB 6 (6 l, ground installation) are low-pressure boilers and can be connected with a hose to submersible pumps without a check valve or to any other water system with a suitable fitting. Heatable from approx. 35 °C to approx. 85 °C, mixable to approx. 3 times the quantity at full heating, less power consumption and fast reheating with good insulation. The boilers are made of high-quality plastic, heat- and corrosion-resistant. Quick and easy assembly with mounting bracket.Fast heatingLow-pressure boilerLow power consumptionFrost monitor for winter operationWater connection 10 mmTÜV-approved5 years warrantyScope of delivery: adjustable thermostat, frost monitor and overheating protection, 1 m cable.Mixing valve TT (not included) for adjusting the water temperature.

If a unit without water content is operated electrically, the radiator will overheat. At approx. 115 °C, the temperature fuse inserted in the radiator responds and thus prevents greater damage. It can be renewed and easily replaced.

The domestic water is heated during the heating phase by the warm air from your heating system via the built-in heat exchanger. The water can also be warmed up to 70 °C via the built-in 230 V electric cartridge. Nautic Compact Air is a convenient addition to your warm air heating. Suitable for 230 V and the connection to your pre-existing heating system in combination with the heat exchanger.Self-regulating heaterOverheating protectionWater drain valveHeating element: 230 V, 500 W (2.2 A)Water connection: 10 mmAir hose connection: 65 – 75 mmFor pressure water systems, a safety drain valve is required (optional)

Especially for caravans.The 5 l water heater provides hot water in the smallest dimensions. It uses the warm air distribution to heat water. The heater can be used without using the heating, as it is equipped with an electric heating element (230 V/300 W).Scope of delivery: control panel, drain and vent valve (without mixing valve)Technical data: heating-up time from 15 °C to 60 °C approx. 50 min; power supply: 230 V ~ 50 Hz; power consumption: 1.3 A (300 W); thermal cutout: 65 °C; pressure: max. 1.2 bar

The heating rod is an original Truma spare part. Please check the manufacturer’s part number.