Powerful Can run dry for a short time Extremely quiet Dirt-resistant Lightweight

Is directly screwed onto LILIE by Shurflo pumps. Fine-meshed, stainless metal sieve stops particles which could otherwise harm your pump or water system. The screwed-on, transparent filter cup enables simple cleaning, suitable for drinking water. Filter 1/2" IG x 12 mm.

Accurate level indication for almost all tanks up to 200 cm in height, easy to install, with integrated Bluetooth for wireless display via app or optionally via cable with a compatible display. Installation is quick and straightforward, with all necessary components included. Only a power supply of 10 – 30 V DC is required for operation. Works with fresh, grey or black water tanksFor installation inside the vehicle Multiple sensors can be displayed simultaneously with the app Remote access possible (sensor must be connected to the app) Additional signal output for external displays and panelsPro KitMaximum flexibility during installationFlexible installation on the tank from above or the side is possible

The tried-and-tested diaphragm pumps in the LILIE SOFTSERIE® have a smooth-running motor and an integrated bypass control as the centrepiece. They can also prime themselves dry and run dry for short periods. The motors have a high level of efficiency and a very low power consumption. Multiple tests of every single pump produced ensure 100% functionality. The bypass guarantees a constant flow of water even with low water withdrawal. You no longer have to deal with a pulsating water flow!

The tried-and-tested diaphragm pumps in the LILIE SOFTSERIE® have a smooth-running motor and an integrated bypass control as the centrepiece. They can also prime themselves dry and run dry for short periods. The motors have a high level of efficiency and a very low power consumption. Multiple tests of every single pump produced ensure 100% functionality. The bypass guarantees a constant flow of water even with low water withdrawal. You no longer have to deal with a pulsating water flow!

Ensures even water flow in automatic pressure pumps and prevents them from being switched on and off several times during low water withdrawal. Safety-approved for 5 bar overpressure at 60 °C according to TÜV-SW-005-93. With venting screw for draining the system and stable fastening straps on the housing.Dimensions: T-Connection ø 10/12.5 mm. Tank H 300 x W 90 mm; tank with brackets H 300 x W 100 mm; hole spacing 120 mm. Hose tail W 80 x H 38 mm.

The fresh water pump by Reich is characterised by its long service life and high performance. Optionally with automatic ventilation. Material and surface of the pumps are dirt-resistant and therefore easy to clean and hygienic.

Maximum flexibility in installation and high resistance: This sensor is suitable for tanks up to 200 cm in height and displays precise fill levels. Installation is straightforward, with all components included. Thanks to integrated Bluetooth, the values can be displayed wirelessly via an app; alternatively, they can also be shown via cable on compatible displays. Powered by 10 – 30 V DC, the sensor is ideal for fresh, grey or black water tanks. Additionally, it is also suitable for outdoor use (IP65). Multiple sensors can be displayed in the app. Incl. remote access and signal output for external displays.

Designed for a constant and strong water flow. Can be installed in any position and operated dry without being damaged. Equipped with an inner membrane made from a single piece to make it waterproof. Four chambers for a stronger water flow. Standard filter. Available in versions for 7, 10 and 13 l.

Suitable for increasing pressure on existing submersible pump systemsIn combination with the submersible pump, higher performance than a pressure pumpConnection directly behind the submersible pump, or in the existing piping systemNot self-priming

Especially durable and powerful submersible pump. The material and the surface of the pumps are easy to clean. With automatic ventilation.

Flow rate: 14 l/min10 – 18 WOutlet: ø 10 mm, length 25 mm

For automatic and reliable supply of drinking water in motorhomes. The unique diaphragm technology guarantees precise and controlled dosing. Each pump head has a check valve for over 13 bar and a pressure switch control. This ensures that water flows immediately when the tap is opened. All LILIE diaphragm pumps are dry self-priming and may also run dry.

Fresh water pump for mobile use. Safe to run dry. Not for continuous operation. Independent of the direction of rotation.

The IQflo® technology uses a flow-controlled regulation system that delivers water gently and efficiently to ensure a smart and quiet water flow. The motor starts with minimal power consumption and reduces noise when you turn on the tap or flush the toilet. When you shower, the system operates at full power to make your shower more comfortable. The modern sensor and fluid technology ensures a quiet, smooth water flow without a separate pressure compensation tank.Advantages:Whisper-quiet waterPowerful shower spray and low power consumptionConstant water temperature for comfort like at homeNoise-dampening base plate5-year warranty on the motor

For convenient water withdrawal. An air bubble with constant pressure is enclosed by a flexible membrane. The pressure of the air bubble is preset to 1.4 bar and can be changed using a bicycle pump. Optimum function when this value is close to the restart pressure of the pump. Mounting hole 105 mm.

Comet submersible pumps are suitable for all openings of standard water tanks and hoses with ø 10 mm.Self-primingSafe to run dry for up to 30 minutesSuitable for drinking waterFor pumping fresh water up to max. 60 °CExpandable with check valve and filter

T-connection.

The Comet submersible pump fits all openings of commercial water tanks and hoses with ø 10 mm.Self-primingSafe to run dry for up to 30 minSuitable for drinking waterFor conveying fresh water up to max. 60 °CExpandable with check valve and filterWith Softstart

Replacement cartridge activated carbon filter for water filter system Reinguard.

Automatic ventilation and sieveHigher performance than pressure pumps

The water decalcifying system without salt offers up to 94% limescale protection thanks to food-safe malic acid in granulate form. It protects pipes and appliances from limescale deposits, extends their service life and improves the taste. The system is characterised by a durable, reusable V4A stainless steel housing. One filter cartridge has a service life of up to 6000 litres without significant pressure loss. Connections: 3/8" external thread for inlet and outlet. The filter is easy to replace thanks to a screw thread. The operating pressure is between 0.8 and 4 bar.

For installation into the suction pipe between water tank and pump. The fine stainless metal filter retains particles and parts.Technical data: filter: metal; mesh width: 0.3 mm, 1/2" A/12 mm.

Automatic drinking water pump with bypass control. High delivery rate with pulsation-free operation Very quiet due to four-chamber membrane technology and fully rubberised anti-vibration feet Flow rate up to 11.6 l/min With adjustable bypass control Adjustable pressure switch (presetting pressure switch: 2.4 bar, adjustable from 1.9 – 3.8 bar) Safe to run dry Self-priming up to a height of 4 m Materials suitable for drinking water Incl. stainless steel pre-filter strainer and hose connections Compatible with UV-C LED water disinfection and sterile filters by WM aquatec Technical data: Max. delivery rate: 11.6 l/min (open flow) Cut-off pressure: 2.4 bar (adjustable from 1.4 – 2.8 bar) Water connections: 12/13 mm hose nozzle (1 x straight, 1 x angled)

Especially durable and powerful submersible pump. The material and the surface of the pumps are easy to clean.

Suitable for continuous operationFor ø 10 mm hosesSafe to run dry for up to 30 minSuitable for drinking waterFor pumping fresh water up to max. 60 °CExpandable with check valve and filter

Transformer in a firmly moulded plastic housing. Is fixed with four screws. On/off switch on the housing. Integrated thermal cutoff (127 °C). Max. duty cycle: 1 hour.

The tried-and-tested diaphragm pumps in the LILIE SOFTSERIE® have a smooth-running motor and an integrated bypass control as the centrepiece. They can also prime themselves dry and run dry for short periods. The motors have a high level of efficiency and a very low power consumption. Multiple tests of every single pump produced ensure 100% functionality. The bypass guarantees a constant flow of water even with low water withdrawal. You no longer have to deal with a pulsating water flow!

Pump cap for Waterport 2.0/4.0/8.0. Screw cap with integrated pumping function to increase the water pressure in the Waterports.

For increasing the flow rate. Ideal for upgrades.Not self-primingSafe to run dry for up to 30 minSuitable for drinking waterFor pumping fresh water up to max. 60 °CExpandable with check valve and filter

Universally applicable, fully rubberised magnetic holder with two strong neodymium magnets. Perfect for securing the WM filter during filling. Removable without residue.

Fine fibre filter for installation in the hose system. Prevents dirt particles from entering the water system. Hose inner ø: 10 mm.

Certec® Inline Compact Turbo Filter System The Certec Inline compact turbo filter system by LILIE was specially developed as a solution for pressure pump systems in recreational vehicles. Innovative LILIE Push-and-Connect Cartridges can be exchanged very quickly Compact, easy to use and reliable Bioelectro DEPOT Plus Especially antiseptic and antibacterial Highest possible flow rate Minimised loss of pressure Very high protection against germs Extremely high filter performance Special activated carbon made of organic coconut Extremely high molecular filtering Extremely high wide-band absorption Integrated ventilation function Patented System-modular in LILIE TWSWG Unique integrated filter system Uniquely germ-extracting Approved for drinking water Compact, easy to operate and reliable. Highest possible flow rate, minimised pressure loss, with ventilation knob for operation without splashing, incl. robust stainless steel holder for easy click-in of the housing. LILIE Push-and-Connect valve adapter and quick coupling. High internal diameter, ideal for high flow rates suitable for LILIE TWSWG, quick and easy installation, long-term high and reliable sealing at high flow rates, connection for hoses with an inner diameter of 10 mm. Pressure-resistant and leakproof up to 5 bar.

Double diaphragm pressure pump for supplying several taps. Suitable for continuous operation with battery power through air cooling and with automatic pressure switch for 1.4 bar. The pump is suitable for hot water boilers and instantaneous water heaters. Hose connection ø 10/12 mm. Static head: 1.50 m.

Special drain/suction pump for: Showers Sinks WashbasinsFresh/waste water tanks Specially for higher waste water tanks This solution collects shower and waste water and automatically pumps it into the waste water tank, even if the tank is at a higher level. The collection container holds up to 4 litres of liquid. Two dirt filters protect the pump from heavy contamination and malfunctions. The housing has several inlets (19/25 mm and 30/40 mm) for the use of various inlet hoses. A discharge outlet is provided, which can be used for multiple cross-sections (19/25 mm).  A vent connection and a provided cable feed-through ensure easy activation and reliable operation. Inlets: 19 mm, 19/25 mm, 30/40 mmOutlet: 19/25 mm

Fine fibre filter for installation on the pump suction side. Prevents dirt particles from entering the water system. Hose inner ø: 10 mm.

For ø 10 mm hoses, for installation in hose lines.

Prevents water from flowing backwards. Hose connection: 10 mm. Suitable for all Comet submersible pumps.

Connectors: ø 10 mm. Prevents water from flowing backwards.

LILIE-Kartuschen erreichen eine hervorragende Durchflussrate mit äußerst geringem Druckverlust. Nur so kann im mobilen Einsatz genug Wasser bei passendem Druck fließen. Verunreinigungen werden dabei zuverlässig herausgefiltert, Für mittelmäßige Verunreinigung. Vorfilter gegen Grobverschmutzung, Hauptfilter mit Aktivkohle, Nachfilter gegen Schwebstoffe. Rückhaltewert von 5 μm Standzeit max. 25 000 l oder 6 Monate Durchfluss max. 19 l/m Druckverlust max. 0,6 bar

With sight glass for the inlet port of pressure pumps. The easy-to-clean filter is screwable and guarantees a smooth operation of the water supply due to its 0.1 mm fine mesh. For hoses with a 10 or 12 mm inner diameter.

Designed for a constant and strong water flow. Can be installed in any position and operated dry without being damaged. Equipped with an inner membrane made from a single piece to make it waterproof. Four chambers for a stronger water flow. Standard filter. Available in versions for 7, 10 and 13 l.

Especially durable and powerful submersible pump. The material and the surface of the pumps are easy to clean. With check valve.

Compact 12 V connection for motorhomes, caravans and boats with minimal power consumption (1 W in standby, 10 W in disinfection mode). The environmentally friendly UVC LED technology ensures effective disinfection, even against chlorine-resistant pathogens, without altering taste or odour. The device is space-saving, easy to install and offers a long lifespan with high efficiency. A control LED indicates the operating status. Suitable for suction and pressure pumps. The service life of the UVC unit in disinfection mode is up to 10,000 hours. Germ reduction (E. coli) of up to 99.9998 % is possible with a water flow rate of 2 l/min.

with ventilation

with removable check valve and ventilation

3-Kammer-Membranpumpen – Der Klassiker mit bewährter Druckschalter-Regelung ist zuverlässig und langlebig. Zur automatischen und zuverlässigen Versorgung von Trinkwasser in Wohnmobilen. Die einzigartige Membrantechnologie garantiert eine präzise und kontrollierte Dosierung. Jeder Pumpkopf hat eine Rückflusssperre für über 13 bar und eine Druckschalterregelung. Diese gewährleistet, dass beim Öffnen der Zapfstelle sofort Wasser fließt. Sämtliche LILIE Membranpumpen sind trocken selbstansaugend und dürfen auch trocken laufen. Der Motor, die Bodenplatte und der Pumpkopfantrieb bestehen aus Metall, der restliche Pumpkopf aus Polypropylen.Trinkwassersystem WeißGELB® gemäß DIN 2001-02, geprüft nach KTW und DVGW Arbeitsblatt W270Zapfstellen: 5

For automatic and reliable supply of drinking water in motorhomes. The unique diaphragm technology guarantees precise and controlled dosing. Each pump head has a check valve for over 13 bar and a pressure switch control. This ensures that water flows immediately when the tap is opened. All LILIE diaphragm pumps are dry self-priming and may also run dry.