The Colorado city water regulator allows for direct water supply to your vehicle without the need for tanks or canisters. It features a built-in regulator with a check valve that reduces the inlet pressure from up to 12 bar to an outlet pressure of 0.7 bar. The device is protected in a UV-resistant ABS plastic housing and can be closed with a lid when not in use. It has a standard hose coupling for connection and a neutral design that fits well into the vehicle. The dimensions of the device are 90 x 110 mm.

With microswitch to switch on the submersible pump. Including hose tail and hose tail with nut for quick coupling of the water socket.

Without locking cylinder.

City water connection, thermoplastic. Pure white (RAL 9010), black or anthracite. With pressure reducer and magnetic hinged lid, water pressure is reduced down to 1.1 bar. Cut-out dimensions: 85.5 x 90 mm.

External shower connection with water socket. The shower fitting has a white shower head and a hose with a length of 2 m.

Housing for service hatch Smart Supply, long.

For water, long version. Lockable with 2 keys; ø 40 mm.

With one outlet each for gas and water supply outdoors. After removing the respective hose (gas hose and shower not included), the water supply will automatically stop. Equipped with gas shut-off valve. With lock and key. Installation dimensions: 157 x 67 mm.

Short version, incl. lid for hose connection ø 40 mm.

reinforced

Thanks to the integrated funnel, water can be safely filled into almost all water containers. Connection nozzles ø 40 mm are lockable. Incl. inner frame, installation template and screws.

Without key cylinder.

For filling nozzles. Nozzle ø 40 mm. Complete with tank cap and 2 keys.

Water socket incl. shower and pre-mixer for hot and cold water. With Charisma tap and Carletta hose. With microswitch to turn on the submersible pump. Also for pressure pumps up to 3 bar.

Short version for hose connection ø 40 mm incl. lockable lid. Connection: 3.6 cm.

Water socket incl. shower and pre-mixer for hot and cold water. With Charisma tap and Carletta hose. With microswitch to turn on the submersible pump. Also for pressure pumps up to 3 bar.

With hinged lid and magnetic closure. Opening diameter: 80 mm. Can be used, for example, as a conduit duct, cable pass-through, etc. Hole size: 87 x 81 x 89 mm.

reinforced

Allows a direct connection to the public water network. The float control switches off the water supply. Connection: 3/8".

Incl. lid with magnetic closure and without latch, hose connection ø 40 mm.

Water socket including shower and pre-mixer for hot and cold water. With Charisma tap and Carletta hose. With micro switch to turn on the submersible pump. Also for pressure pumps up to 3 bar.

Nozzle 40/100 mm with ventilation and tank cap, for STS/Zadi cylinder systems.

Filling in water made easy. Water tank cap for hose connection, Gardena system. For filler necks with 3-point bayonet lock ø 77 mm and ø 67 mm by means of supplied additional ring. Also suitable for water tanks with and without overflow device.

Without locking cylinder.