Incl. chain, plug and seal. Hose connection ø 19 mm.

The 9 mm wide clamp made of stainless spring steel is suitable for pipes and hoses from 8 to 60 mm, depending on the size. The dimension ø indicates the largest pipe/hose diameter.

Short version for hose connection ø 40 mm incl. lockable lid. Connection: 3.6 cm.

Incl. chain, plug and seal. Hose connection ø 19 mm.

Zinc-coated for spiral hose.

Can be reopened. Made of polyacetal. Quick and easy to use.

For water tanks.

The Colorado city water regulator allows for direct water supply to your vehicle without the need for tanks or canisters. It features a built-in regulator with a check valve that reduces the inlet pressure from up to 12 bar to an outlet pressure of 0.7 bar. The device is protected in a UV-resistant ABS plastic housing and can be closed with a lid when not in use. It has a standard hose coupling for connection and a neutral design that fits well into the vehicle. The dimensions of the device are 90 x 110 mm.

The ideal connection for pipes transporting water, air, oil or fuel.

With microswitch to switch on the submersible pump. Including hose tail and hose tail with nut for quick coupling of the water socket.

Incl. seal, nut and screw closure.

The ideal connection for pipes transporting water, air, oil or fuel.

Brass stopcock with hose connection on both sides for the drinking water system. In 10, 12, 19 mm. Drinking water certified. Ideal for LILIE Native drinking water hoses.

Without locking cylinder.

Brass stopcock with hose connection on both sides for the drinking water system. In 10, 12, 19 mm. Drinking water certified. Ideal for LILIE Native drinking water hoses.

City water connection, thermoplastic. Pure white (RAL 9010), black or anthracite. With pressure reducer and magnetic hinged lid, water pressure is reduced down to 1.1 bar. Cut-out dimensions: 85.5 x 90 mm.

External shower connection with water socket. The shower fitting has a white shower head and a hose with a length of 2 m.

With strainer and stopper, connection (ø 39 mm) suitable for pluggable pipe system. With one or two outlets.

The ideal connection for pipes transporting water, air, oil or fuel.

With external thread for screwing in, drain spout, lock nut and seal.

for water drain

Housing for service hatch Smart Supply, long.

For water, long version. Lockable with 2 keys; ø 40 mm.

The ideal connection for pipes transporting water, air, oil or fuel.

Quick connector V4A stainless steel 3/8" internal thread for fast and straightforward connection of the filling guard to the fresh water hose (e.g. Gardena click system).

With one outlet each for gas and water supply outdoors. After removing the respective hose (gas hose and shower not included), the water supply will automatically stop. Equipped with gas shut-off valve. With lock and key. Installation dimensions: 157 x 67 mm.

With hose nozzles on both sides and threaded connection, with seal and nut. For ø 10/12 mm connection.

Short version, incl. lid for hose connection ø 40 mm.

With 3/4" connection on both sides.

reinforced

With double female pipe thread. Thread connection. Available in 3 sizes.

Thanks to the integrated funnel, water can be safely filled into almost all water containers. Connection nozzles ø 40 mm are lockable. Incl. inner frame, installation template and screws.

With seal and nut 2".

Without key cylinder.

Hose nozzle on one side, long thread 1/2" on one side, with seal and nut. For ø 10/12 mm connection.

With internal thread on both sides. Thread connection. Available in 3 sizes. Approximately 40% less weight than brass, non-corrosive, permanently smooth operation, acid-resistant, complies with the end-of-life vehicle directive.

For filling nozzles. Nozzle ø 40 mm. Complete with tank cap and 2 keys.

Water socket incl. shower and pre-mixer for hot and cold water. With Charisma tap and Carletta hose. With microswitch to turn on the submersible pump. Also for pressure pumps up to 3 bar.

The ideal connection for pipes transporting water, air, oil or fuel.

For water tanks.

Effective solution for eliminating unpleasant odours from your waste water tank.

The ideal connection for pipes transporting water, air, oil or fuel.

The ideal connection for pipes transporting water, air, oil or fuel.

Water check valve for interrupting the water flow in individual hoses or pipes.

Elbow bulkhead connection for ø 10/12 mm connection. Suitable for drinking water. Takes up little space. With counter nut and seal.

The ideal connection for pipes transporting water, air, oil or fuel.

Incl. chain, plug and seal. Hose connection ø 19 mm.

With seal and nut 2".