Maße Länge:
500 mm
With O-ring on both ends.
Variants from €5.20*
Straight pipe connector 40/32 (AG 1 ¼") with outer ring groove for the pipe connection system GrauGELB®.
Variante:
Winkel 90°
Silicone lubricant is recommended for easier assembly.
Variants from €3.80*
Verpackung:
fertig verpackt
Incl. chain, plug and seal. Hose connection ø 19 mm.
For the drain valves 300/090 (12 V) and 300/089 (24 V)For retrofitting the drain valve 303/069 (year 01/2024)Pressure switch for switching the display on/offDirection switch for opening and closing the electric drain valvePosition indicator for open valve and closed valveSuitable plug-in connection for 300/090 and 300/089
The tried-and-tested LILIE ball valve is available in a set with the function indicator. The indicator allows you to recognise whether the system is open or closed.
Variante:
gerade
Silicone lubricant is recommended for easier assembly.
Variante:
90°
|
Verpackung:
fertig verpackt
Incl. chain, plug and seal. Hose connection ø 19 mm.
Valve body with high-performance actuator. Connection on the outlet side for the LILIE GrauGELB 40 mm pipe plug-in system with double O-ring. Ready for connection with 2 stainless steel adapters, seals and stainless steel screws. Inner diameter: 10 mm, outer diameter: 18 mm, flow rate: 530 mm²
Maße Durchmesser:
25 mm
|
Verpackung:
fertig verpackt
For water tanks.
Variants from €5.10*
Hose Connection Adapter Straight with Bayonet Lock ø 74
Maße Länge:
1100 mm
HABA's extendable waste water hoses allow waste water to be conveniently drained into the sewage system or waste tank. If required, you can attach an additional hose using an adapter (301/485).
With the universal adapter, you can connect the waste water hose (301/483 and 301/484) to the drain of e.g. your sink if the hose does not fit directly onto the drain hose. If the waste water hose is not long enough, it can be connected to another waste water hose with the help of the adapter.
Extendable emptying hose for disposal. Particularly strong with increased wall thickness for special requirements.
The 12 V motor is mounted at the existing valve and connected to the switch. By operating the timer, the valve opens/closes automatically within a few seconds. Incl. mechanism, switch, fixing material, manual and connection cable. Splash-proof installation.Convenient, clean, easy and automatic emptyingLong service life of the valve due to consistent operationRemote control enables operation at the touch of a buttonScope of delivery: motor (please order the adapter and drain valves separately).Technical data: US System 1 1/2"Drive (W x H x D): 100 x 80 x 130 mm; switch (W x H x D): 100 x 40 x 50 mm.Opening/closing time: 3 secondsFor 1 1/2" valves of Valterra and Bristol.
For tanks, without thread. Can be glued into the sliding valve. For item no. 300/416 (#24741). Outer diameter: 89 mm.
Anschluss Wasser:
1¼" | Durchfluss: 490 mm²
The electric ball valve system by LILIE can be used to comfortably open, close and drain (waste-)water circulation systems. A unique combination of various special functions ensures long-term reliability.Valve body with high-performance drive. The valve is controlled via a 4-pole switch.
Variants from €139.00*
For caravans and motorhomes. Cost-effective installation of the wastewater pipe. No screwing, no gluing, no welding – just plug them together. Frost-resistant from -40 °C to +80 °C.
For caravans and motorhomes. Cost-effective installation of the wastewater pipe. No screwing, no gluing, no welding – just plug them together. Frost-resistant from -40 °C to +80 °C.
For sliders of Vecam, FAP, Zadi, Fiamma. For US hose connections. For example for model year 01/02 KNAUS, Eifelland, Weinsberg.