With the installation frame for CoolMatic NRX, the refrigerator can be installed as standard or flush without edges.

With the installation frame for CoolMatic NRX, the refrigerator can be installed as standard or flush without edges.

To decrease the temperature behind the refrigerator. It is simply mounted between the blocks of lamellae. This set is ready-to-install, consisting of a fan with close fault clearance, a special mount, a thermostat switch and 30 cm cable.

Consists of a mounting frame and grille.

For connecting the MD models to 230 V.

This very effective set consists of 2 12-V fans with ø 95 mm, integrated thermostat for automatic operation and all required installation components. The ventilation speed can be regulated in 2 stages. Volume of transported air at maximum ventilation speed: 2 x 72 m³ / hour.

Vegetable Compartment for Thetford Refrigerators

Improves the performance of the refrigerator with high outside temperatures or unfavourable installation conditions. Easy installation with pre-assembled cables, thermostatic-controlled, quiet operation. Only with the installation of this ventilation set, the Dometic licensing and warranty remain valid.

Although its additional cooling effect is strong, this double ventilator for 12/ 24 V works very silently. Speed can be regulated manually by the external control unit, or automatically by the rpm-regulator with temperature sensor. The housing of this sturdy ventilator, which is available in 3 sizes, is made of aluminium.

For the trouble-free connection of the Cruise compressor refrigerators to the 230 V power supply: with automatic priority function for network operation to spare the on-board battery.

Installation frame for CoolMatic CRX 80.

With the installation frame for CoolMatic NRX, the refrigerator can be installed as standard or flush without edges.

With the installation frame for CoolMatic NRX, the refrigerator can be installed as standard or flush without edges.

Some models may overlap. The nine-digit product number (92...) can be used to find the right spare part for your refrigerator.

Suitable for refrigerators Thetford N4000 E. Only with this set can the refrigerator be operated self-sufficiently. The Battery Pack can only be used if the refrigerator is not connected to a CI bus.

Installation frame for CoolMatic CRX 110.

High-performance refrigerator ventilation with control panel. Temperature measurement via sensor. Mounting bracket and connection cable included in delivery.

With the installation frame for CoolMatic NRX, the refrigerator can be installed as standard or flush without edges.

With the installation frame for CoolMatic NRX, the refrigerator can be installed as standard or flush without edges.

This refrigerator ventilation improves air circulation behind the refrigerator and a better airflow at the condenser is achieved. It supports temperature regulation and maximizes the performance of the fridge.

Battery compartment for stand-alone operation of a refrigerator of the N3000 E series. Requires 6 batteries Mignon LR 6/AA (item no. 322/741, catalogue page 611). The battery pack can only be used if the refrigerator is not connected to a CI bus.

Very quiet 12 V refrigerator double ventilator, specially designed for mounting on existing ventilation grilles to transport waste heat, e.g. from refrigerators, to the outside more quickly and thus improve cooling performance. The ventilator, which is waterproof and dustproof to IP55 standard, can be switched manually in 6 stages via the external speed controller or operated automatically via sensor-controlled automation in the temperature range from 20 °C (switch-on point) to 45 °C (maximum speed). The ventilators are equipped with overvoltage protection integrated in the control unit, which allows safe operation in the 12 V on-board power supply.

With the installation frame for CoolMatic NRX, the refrigerator can be installed as standard or flush without edges.

Suitable for Thetford ventilation grilles.