Consists of: low pressure regulator type EN61 without manometer, 1.5 kg/h, 50 mbar and plastic medium-pressure hose line 400 mm down to -20 °C, G ¼ left-hand thread union nut on both sides and MiniTool. For private outdoor use only!

Stainless steel exhaust pipe set with silencer and outer pipe.

For connection to gas cylinders in the industrial sector. With excess pressure protection. Suitable for connection to 5 or 11 kg gas cylinders. 1.5 kg/h. Please note: according to system diagram F1, low pressure regulators must be equipped with a pressure gauge. Pressure regulators with an outlet pressure of 30 mbar are not suitable for use in Germany!

Consists of: low pressure regulator type EN61-DS with manometer, 1.5 kg/h, 50 mbar and rubber medium-pressure hose line 400 mm, down to -30 °C, with G ¼ left-hand thread union nut on both sides and MiniTool. Mandatory for all commercial and private small bottle devices (e.g. catalytic or infrared) indoors, as well as commercial small bottle devices outdoors.

The remote module Truma iNet X Connect makes it possible to use the Truma iNet X app on the go.You no longer need to be near your vehicle to control the connected devices or to see the different status indications.

Conversion from Combi D to next generation Combi D. The old wall flue cutout can still be used with this set.Scope of delivery: adapter wall flue Combi D (E), pre-assembled, flue outer part, included screws, exhaust pipe clamps, hose clamps

Nearly odourless.