Reduction of pipes from ø 72 mm to ø 49 mm.

Truma Combi heaters combine heating and hot water functions in one device with an integrated stainless steel tank. They are lighter than their predecessors, consume less battery power and diesel, are easier to maintain and have an automatic altitude adjustment up to 3000 m as well as a standardised wall flue for both variants.Technical features include a heat output of up to 6000 W, 10 litre water capacity and efficient power consumption. The scope of delivery includes the heater, a room temperature sensor, Truma iNet X panel, control panel cable, fuel line, dosing pump and mounting parts. Water sets and tank connection sets as well as flue gas ducts must be ordered separately.Please note: Truma diesel heaters (Combi D and Combi D next generation) are approved for operation with HVO, XtL according to EN 15940 in pure form (e.g. HVO100, i.e. 100% hydrogenated vegetable oil) as well as their mixtures with pure fossil diesel fuel and B7.

The mobile parking heater Autoterm 2D by Pundmann in 3 variations. Be it in a roof tent, in small quarters, in a tent or generally when camping, it is the ideal companion for outdoor enthusiasts. Due to its small dimensions and the small capacity of 40 litres, the heater can easily be stowed in the boot and is therefore always with you. Two handles make it easy to carry the heater from one place to another. Incl. remote control and Anderson plug for charging other devices. Ideal for rooms up to 20 m².Technical data: Heat output: 0.8 to 2 kW; consumption: 0.10 l/h to 0.24 l/h.

The mobile parking heater Autoterm 2D by Pundmann in 3 variations. Be it in a roof tent, in small quarters, in a tent or generally when camping, it is the ideal companion for outdoor enthusiasts. Due to its small dimensions and the small capacity of 40 litres, the heater can easily be stowed in the boot and is therefore always with you. Two handles make it easy to carry the heater from one place to another. Incl. remote control and Anderson plug for charging other devices. Ideal for rooms up to 20 m².Technical data: Heat output: 0.8 to 2 kW; consumption: 0.10 l/h to 0.24 l/h.

The AZR branch pipe enables the efficient distribution of air or gas in various systems. Easy to integrate and durable – the perfect choice for reliable piping installations.

These devices are specifically designed for use in recreational vehicles. They can be used where space is limited and only low current ratios with weak fusing are available.KB 3 (3 l, wall installation) and KB 6 (6 l, ground installation) are low-pressure boilers and can be connected with a hose to submersible pumps without a check valve or to any other water system with a suitable fitting. Heatable from approx. 35 °C to approx. 85 °C, mixable to approx. 3 times the quantity at full heating, less power consumption and fast reheating with good insulation. The boilers are made of high-quality plastic, heat- and corrosion-resistant. Quick and easy assembly with mounting bracket.Fast heatingLow-pressure boilerLow power consumptionFrost monitor for winter operationWater connection 10 mmTÜV-approved5 years warrantyScope of delivery: adjustable thermostat, frost monitor and overheating protection, 1 m cable.Mixing valve TT (not included) for adjusting the water temperature.

The Pundmann pressure boiler is available in 3-, 6- or 9-litre versions and heats water with a 180 W or 200 W heating element via a 12 V power supply. At a working pressure of 2.3 bar, the water stays warm for longer. The boiler automatically starts heating and switches off once the desired temperature is reached. Its compact design and ease of use make it a practical and functional device.Technical data: heating time: approx. 75 min./75 °C; water connection diameter 10 mm. Operating pressure: 2.3 bar; safety valve setting: 3.0 bar.

Truma Combi heaters combine heating and hot water functions in one appliance with an integrated stainless steel tank. They are characterised by a weight saving of 3 kg compared to older models, low consumption, a longer service life thanks to efficient combustion control, automatic altitude adjustment up to 3000 m and a uniform wall flue for all variants.Technical highlights include up to 6 combustion stages, a heat output of up to 6000 W, 10 litre water capacity and a water heating time of approx. 24 minutes. The scope of delivery includes the Combi D heater, a room temperature sensor, the Truma iNet X panel, a control panel cable, a fuel line, a dosing pump and mounting parts. Water sets and the tank connection set for Combi D as well as a wall flue set with flue gas pipe and feed pipe are available separately.Please note: Truma diesel heaters (Combi D and Combi D next generation) are approved for operation with HVO, XtL according to EN 15940 in pure form (e.g. HVO100, i.e. 100% hydrogenated vegetable oil) as well as their mixtures with pure fossil diesel fuel and B7.

The Truma VarioHeat eco is the perfect heater for motorhomes, caravans and vans. This compact heater offers efficient performance and can be installed flexibly without losing valuable storage space. The installation is straightforward and space-saving. With the optional Truma E-Kit (item no.: 309/599, not included), the VarioHeat eco becomes a versatile electric heater. It is controlled via the digital control panel Truma CP plus VarioHeat. Enjoy a pleasant temperature and maximum comfort on all your travels.Technical data: Nominal heat output:Level 1/2: 1300/2800 W Air conveyance:Level 1/2: 75/155 m³/h Gas consumption (propane/butane):Level 1/2: 100/220 g/h Current consumption (12 V):Level 1/2: 0.65/2.75 A The delivery includes a 6 m long cable, a room temperature sensor, a mounting bracket and accessories for the electrical connection.

End piece nut EM.

For 10 mm hose systems.

The Pundmann pressure boiler is available in 3-, 6- or 9-litre versions and heats water with a 180 W or 200 W heating element via a 12 V power supply. At a working pressure of 2.3 bar, the water stays warm for longer. The boiler automatically starts heating and switches off once the desired temperature is reached. Its compact design and ease of use make it a practical and functional device.Technical data: heating time: approx. 75 min./75 °C; water connection diameter 10 mm. Operating pressure: 2.3 bar; safety valve setting: 3.0 bar.

The Pundmann pressure boiler is available in 3-, 6- or 9-litre versions and heats water with a 180 W or 200 W heating element via a 12 V power supply. At a working pressure of 2.3 bar, the water stays warm for longer. The boiler automatically starts heating and switches off once the desired temperature is reached. Its compact design and ease of use make it a practical and functional device.Technical data: heating time: approx. 75 min./75 °C; water connection diameter 10 mm. Operating pressure: 2.3 bar; safety valve setting: 3.0 bar.

The Autoterm 2D 12 V hot water set with a 6-litre boiler featuring a heating element and Autoterm parking heater, which heats the water in the boiler, is a popular solution for motorhomes and other recreational vehicles. When the vehicle is in motion, the engine heats the water in the boiler, thus saving fuel. When the vehicle is stationary, e.g. at a campsite, the Autoterm 2D parking heater can heat up the water in the heating boiler and keep the vehicle warm.

Truma corner nozzle EC 35 mm.

For the air distribution pipes of electric heaters, ø 65 mm and ø 72 mm.

The ÜR 3 pipe offers a reliable solution for guiding air, ø 75 mm.

These devices are specifically designed for use in recreational vehicles. They can be used where space is limited and only low current ratios with weak fusing are available.KB 3 (3 l, wall installation) and KB 6 (6 l, ground installation) are low-pressure boilers and can be connected with a hose to submersible pumps without a check valve or to any other water system with a suitable fitting. Heatable from approx. 35 °C to approx. 85 °C, mixable to approx. 3 times the quantity at full heating, less power consumption and fast reheating with good insulation. The boilers are made of high-quality plastic, heat- and corrosion-resistant. Quick and easy assembly with mounting bracket.Fast heatingLow-pressure boilerLow power consumptionFrost monitor for winter operationWater connection 10 mmTÜV-approved5 years warrantyScope of delivery: adjustable thermostat, frost monitor and overheating protection, 1 m cable.Mixing valve TT (not included) for adjusting the water temperature.

The pipe ÜR 3 offers a reliable solution for air conveyance, ø 65 mm.

The pipe VR 72 with a diameter of 72 mm is ideal for effective air distribution and is versatile for use in heating and ventilation systems.

Liquid gas heater with water heater, optionally with electric heater 230 V, 1800 W.Compact: light and space-saving heatingConvenient: easy to installCan be combined: automatic air conditioning possible in conjunction with Truma air conditioning systemFlexible: also available as a hybrid heater in the Combi E versionTechnical data:Heat output: 2000 W – 6000 WWater capacity: 10 lHeating of water from approx. 15 °C to approx. 60 °C: approx. 23 min.Power consumption 12 V: heating and hot water: 1.2 – 6.5 A; hot water: 0.5 APower consumption 230 V: 3.9 – 7.8 AScope of delivery: Combi heater with room temperature sensor, Truma iNet X panel, control panel cable 6 m and mounting parts (without exhaust system and without water connection set).Please order separately: water set (consists of FrostControl and elbow connectors) – optionally water set FC TB (fir tree connection) or the water set FC JG (John Guest) and exhaust system – e.g. wall flue set complete with 1.1 m exhaust pipe, 1 m feed pipe and clamps.

The Webasto Thermo Top Evo Motorcaravan water heater is a powerful auxiliary heater for vehicles. It ensures rapid heating of the driver's cab, reduces fuel consumption and enables operation with diesel directly from the vehicle tank. With a heat output of 1.8 – 5.0 kW and low energy consumption, it offers quiet operation and a fast heat-up time. It is ideal for the cold season and protects the engine by preheating it before travelling. Various installation kits and an optional radio remote control are available. Warm air via air outlets inside the dashboard Quick warming up of the driver's cabin High heating power of 5 kW Low diesel fuel and energy consumption Runs on diesel right out of your vehicle tank Low-noise operation Quick heating-up time Heating power: 1.8 – 5.0 kW Fuel: diesel Fuel consumption: 0.22 – 0.62 l/h Nominal power consumption: 10 – 33 W

The Truma VarioHeat comfort is the perfect heater for motorhomes, caravans and vans. This compact heater offers efficient performance and can be installed flexibly without losing valuable storage space. The installation is straightforward and space-saving. With the optional Truma E-Kit (item no.: 309/599, not included), the VarioHeat comfort becomes a versatile electric heater. It is controlled via the digital control panel Truma CP plus VarioHeat. Enjoy a pleasant temperature and maximum comfort on all your travels.Technical data: Nominal heat output:Level 1/2/3: 1300/2800/3700 W Air conveyance:Level 1/2/3: 75/155/210 m³/h Gas consumption (propane/butane):Level 1/2/3: 100/220/290 g/h Current consumption (12 V):Level 1/2/3: 0.65/2.75/5.4 A The delivery includes a 6 m long cable, a room temperature sensor, a mounting bracket and accessories for the electrical connection.

Truma Combi heaters combine heating and hot water functions in one device with an integrated stainless steel tank. They are lighter than their predecessors, consume less battery power and diesel, are easier to maintain and have an automatic altitude adjustment up to 3000 m as well as a standardised wall flue for both variants.Technical features include a heat output of up to 6000 W, 10 litre water capacity and efficient power consumption. The scope of delivery includes the heater, a room temperature sensor, Truma iNet X panel, control panel cable, fuel line, dosing pump and mounting parts. Water sets and tank connection sets as well as flue gas ducts must be ordered separately.Please note: Truma diesel heaters (Combi D and Combi D next generation) are approved for operation with HVO, XtL according to EN 15940 in pure form (e.g. HVO100, i.e. 100% hydrogenated vegetable oil) as well as their mixtures with pure fossil diesel fuel and B7.