Reduction of pipes from ø 72 mm to ø 49 mm.

Ventilation grille for air outlet.

Valve for mixing service water up to the set temperature (temperature range 30 – 48 °C).

Flue outer part for Truma Vario Heat.

Automatic safety gas pressure switch system for operating two-cylinder systems in motorhomes and caravans while travelling, for direct connection to the gas cylinders. Consists of: central and switchover regulator with mechanical crash sensor with new pendulum solution and manometer, hose lines and regulator brackets.

For the air distribution pipe of E-heaters, ø 65 mm and ø 72 mm

The AE 5 exhaust pipe ensures safe exhaust gas discharge.

The Truma e-kit adds electric heating to the Truma VarioHeat. You can control both devices via the control panel Truma CP Plus VarioHeat or the Truma App.Technical data E-KitNominal heat output: level 1 – 900 W, level 2 – 1800 WPower consumption: 12 V, approx. 150 mA, 230 V level 1 – 3.9 A, level 2 – 7.8 A

The warm air hose set for mobile parking heaters can be used to transfer warm air into the tent or into small rooms. The set consists of a carry bag with 4 m of weather-resistant neoprene hose, clamps for attaching the hose to the tent and clamps for attaching the hose to the heater.

Clamp ÜS for pipe ÜR.

Truma Combi heaters combine heating and hot water functions in one device with an integrated stainless steel tank. They are lighter than their predecessors, consume less battery power and diesel, are easier to maintain and have an automatic altitude adjustment up to 3000 m as well as a standardised wall flue for both variants.Technical features include a heat output of up to 6000 W, 10 litre water capacity and efficient power consumption. The scope of delivery includes the heater, a room temperature sensor, Truma iNet X panel, control panel cable, fuel line, dosing pump and mounting parts. Water sets and tank connection sets as well as flue gas ducts must be ordered separately.Please note: Truma diesel heaters (Combi D and Combi D next generation) are approved for operation with HVO, XtL according to EN 15940 in pure form (e.g. HVO100, i.e. 100% hydrogenated vegetable oil) as well as their mixtures with pure fossil diesel fuel and B7.

Complete wall flue set WK 64 L for vehicle wall thicknesses up to 40 mm. Consists of: inner part of flue, 1 m exhaust pipe, 1 m feed pipe and clamps (without outer part of flue). In addition, a flue outer part WK is required.

The mobile parking heater Autoterm 2D by Pundmann in 3 variations. Be it in a roof tent, in small quarters, in a tent or generally when camping, it is the ideal companion for outdoor enthusiasts. Due to its small dimensions and the small capacity of 40 litres, the heater can easily be stowed in the boot and is therefore always with you. Two handles make it easy to carry the heater from one place to another. Incl. remote control and Anderson plug for charging other devices. Ideal for rooms up to 20 m².Technical data: Heat output: 0.8 to 2 kW; consumption: 0.10 l/h to 0.24 l/h.

The mobile parking heater Autoterm 2D by Pundmann in 3 variations. Be it in a roof tent, in small quarters, in a tent or generally when camping, it is the ideal companion for outdoor enthusiasts. Due to its small dimensions and the small capacity of 40 litres, the heater can easily be stowed in the boot and is therefore always with you. Two handles make it easy to carry the heater from one place to another. Incl. remote control and Anderson plug for charging other devices. Ideal for rooms up to 20 m².Technical data: Heat output: 0.8 to 2 kW; consumption: 0.10 l/h to 0.24 l/h.

The AZR branch pipe enables the efficient distribution of air or gas in various systems. Easy to integrate and durable – the perfect choice for reliable piping installations.

Elbow pipe ø 72/65 mm.

The flue extension is an original Truma spare part. Please check the manufacturer’s part number.

Hot air pipe.

For caravans with special constructions or for locations with extreme wind conditions. With gas stack roof KD. 45 cm (4 pieces).

These devices are specifically designed for use in recreational vehicles. They can be used where space is limited and only low current ratios with weak fusing are available.KB 3 (3 l, wall installation) and KB 6 (6 l, ground installation) are low-pressure boilers and can be connected with a hose to submersible pumps without a check valve or to any other water system with a suitable fitting. Heatable from approx. 35 °C to approx. 85 °C, mixable to approx. 3 times the quantity at full heating, less power consumption and fast reheating with good insulation. The boilers are made of high-quality plastic, heat- and corrosion-resistant. Quick and easy assembly with mounting bracket.Fast heatingLow-pressure boilerLow power consumptionFrost monitor for winter operationWater connection 10 mmTÜV-approved5 years warrantyScope of delivery: adjustable thermostat, frost monitor and overheating protection, 1 m cable.Mixing valve TT (not included) for adjusting the water temperature.

For connecting two devices.

Flue inner part with clamps. For vehicle wall thicknesses (without outer part of flue and pipes): WK 24 up to 20 mm and WK 64 L up to 40 mm. Additionally, a WK flue outer part is required.

Flue cover for the diversion of combustion gases.

With the digital control panel Truma CP plus, you can easily and conveniently set the temperature in your vehicle. Functions such as fan speed adjustment or night reduction can be selected in no time. The climate control system ensures a constant indoor climate in any weather conditions.Technical data:Power consumption: max. 65 mA (100% backlighting) 6.5 mA – 10 mA (standby)Quiescent current consumption: 3 mA (off)