This patented 1.2 – 2.4 kW gas radiant heater is directly connected to a standard propane and butane gas cartridge and the perfect solution for mobile use outside and in closed rooms of up to 21 m². With the optionally available retrofit gas hose, the "Buddy" can be run with standard propane gas cylinders. For transport, you can purchase a handy bag (not included in delivery), in which you can not only store the heater, but also gas cartridges or the gas hose.Suitable for operation with propane gas and butane gasLow oxygen safety shutdown (ODS)Tilt safety shutdownWith Piezo ignitionRotary switch for temperature controlIntegrated, fold-down handleFor rooms of max. 21 m²Heats up to 6 hours with a 450 g gas cartridgeIntegrated gas pressure regulator 50 mbar

Pleasant heat for caravans, boats, conservatories and homes.The Ecomat can be operated at three different power levels (450/750/1800 W with fuses of 2/4/10 A) and can therefore also be connected to weakly fused lines. The temperature is infinitely variable via the electronic thermostat.Ceramic heating elementThe PTC heating element generates pleasant convection heat and does not dry out the air.Frost monitor functionReliably keeps the temperature above freezing and prevents frost damage.Automatic switch-offWhether at home, on a boat or when camping, the Ecomat 2000 switches off automatically when it tips over.Can be connected almost anywhereMany campsites and boat moorings only have 500 W. No problem with the Ecomat 2000!SafeThere are no glowing components in the Ecomat 2000, so that the risk of fire is greatly reduced.Very quietAlso suitable for continuous operation and, thanks to the metal housing, without unpleasant odours.

The remote module Truma iNet X Connect makes it possible to use the Truma iNet X app on the go.You no longer need to be near your vehicle to control the connected devices or to see the different status indications.

Consists of: low pressure regulator type EN61 without manometer, 1.5 kg/h, 50 mbar and plastic medium-pressure hose line 400 mm down to -20 °C, G ¼ left-hand thread union nut on both sides and MiniTool. For private outdoor use only!

Digital thermo-hygrometer for controlling indoor temperature and humidity for a healthy living environment. Ultra-flat design, comfort zone, maximum and minimum values, with high-gloss surface. Option for wall mounting. Switchable °C/°F. Incl. battery 1 x CR2025.

Comfort package AXK-2 with Airmix for all Truma and Trumavent fans from 05/96 on, except Multivent. Not for motorhomes or heaters with exhaust system under floor.

Truma Combi heaters combine heating and hot water functions in one device with an integrated stainless steel tank. They are lighter than their predecessors, consume less battery power and diesel, are easier to maintain and have an automatic altitude adjustment up to 3000 m as well as a standardised wall flue for both variants.Technical features include a heat output of up to 6000 W, 10 litre water capacity and efficient power consumption. The scope of delivery includes the heater, a room temperature sensor, Truma iNet X panel, control panel cable, fuel line, dosing pump and mounting parts. Water sets and tank connection sets as well as flue gas ducts must be ordered separately.Please note: Truma diesel heaters (Combi D and Combi D next generation) are approved for operation with HVO, XtL according to EN 15940 in pure form (e.g. HVO100, i.e. 100% hydrogenated vegetable oil) as well as their mixtures with pure fossil diesel fuel and B7.

The complete wall flue set WK 24 for vehicle wall thicknesses up to 20 mm. Consists of: inner part of flue, 1 m exhaust pipe, 1 m feed pipe and clamps (without outer part of flue). In addition, a flue outer part WK is required.

For connecting the Truma E-Kit with the pipe VR 80.

For use without hot air distribution

Tank for KB 3.

Reduction of pipes from ø 72 mm to ø 49 mm.

Ventilation grille for air outlet.

Valve for mixing service water up to the set temperature (temperature range 30 – 48 °C).

Flue outer part for Truma Vario Heat.

Automatic safety gas pressure switch system for operating two-cylinder systems in motorhomes and caravans while travelling, for direct connection to the gas cylinders. Consists of: central and switchover regulator with mechanical crash sensor with new pendulum solution and manometer, hose lines and regulator brackets.

For the air distribution pipe of E-heaters, ø 65 mm and ø 72 mm

The AE 5 exhaust pipe ensures safe exhaust gas discharge.

The Truma e-kit adds electric heating to the Truma VarioHeat. You can control both devices via the control panel Truma CP Plus VarioHeat or the Truma App.Technical data E-KitNominal heat output: level 1 – 900 W, level 2 – 1800 WPower consumption: 12 V, approx. 150 mA, 230 V level 1 – 3.9 A, level 2 – 7.8 A

The warm air hose set for mobile parking heaters can be used to transfer warm air into the tent or into small rooms. The set consists of a carry bag with 4 m of weather-resistant neoprene hose, clamps for attaching the hose to the tent and clamps for attaching the hose to the heater.

Clamp ÜS for pipe ÜR.

Truma Combi heaters combine heating and hot water functions in one device with an integrated stainless steel tank. They are lighter than their predecessors, consume less battery power and diesel, are easier to maintain and have an automatic altitude adjustment up to 3000 m as well as a standardised wall flue for both variants.Technical features include a heat output of up to 6000 W, 10 litre water capacity and efficient power consumption. The scope of delivery includes the heater, a room temperature sensor, Truma iNet X panel, control panel cable, fuel line, dosing pump and mounting parts. Water sets and tank connection sets as well as flue gas ducts must be ordered separately.Please note: Truma diesel heaters (Combi D and Combi D next generation) are approved for operation with HVO, XtL according to EN 15940 in pure form (e.g. HVO100, i.e. 100% hydrogenated vegetable oil) as well as their mixtures with pure fossil diesel fuel and B7.

Complete wall flue set WK 64 L for vehicle wall thicknesses up to 40 mm. Consists of: inner part of flue, 1 m exhaust pipe, 1 m feed pipe and clamps (without outer part of flue). In addition, a flue outer part WK is required.

The mobile parking heater Autoterm 2D by Pundmann in 3 variations. Be it in a roof tent, in small quarters, in a tent or generally when camping, it is the ideal companion for outdoor enthusiasts. Due to its small dimensions and the small capacity of 40 litres, the heater can easily be stowed in the boot and is therefore always with you. Two handles make it easy to carry the heater from one place to another. Incl. remote control and Anderson plug for charging other devices. Ideal for rooms up to 20 m².Technical data: Heat output: 0.8 to 2 kW; consumption: 0.10 l/h to 0.24 l/h.

The mobile parking heater Autoterm 2D by Pundmann in 3 variations. Be it in a roof tent, in small quarters, in a tent or generally when camping, it is the ideal companion for outdoor enthusiasts. Due to its small dimensions and the small capacity of 40 litres, the heater can easily be stowed in the boot and is therefore always with you. Two handles make it easy to carry the heater from one place to another. Incl. remote control and Anderson plug for charging other devices. Ideal for rooms up to 20 m².Technical data: Heat output: 0.8 to 2 kW; consumption: 0.10 l/h to 0.24 l/h.

The AZR branch pipe enables the efficient distribution of air or gas in various systems. Easy to integrate and durable – the perfect choice for reliable piping installations.

Elbow pipe ø 72/65 mm.

The flue extension is an original Truma spare part. Please check the manufacturer’s part number.

Hot air pipe.

Stay warm and cosy with this highly efficient portable gas heater. It features heating tiles for optimal heat distribution and operates without electricity, creating an extremely reliable heating solution. Equipped with multiple safety devices, including an oxygen deficit protection and a flame failure device, you can use the unit without worries. This compact and lightweight heater is easy to transport and store, making it perfect for outdoor use. Large handle for comfortable, secure carrying Piezo ignition Protective grille High-quality pressure reducing valve Highly efficient radiant tiles Works with standard threaded gas cartridges Integrated LED light with switch

For caravans with special constructions or for locations with extreme wind conditions. With gas stack roof KD. 45 cm (4 pieces).

These devices are specifically designed for use in recreational vehicles. They can be used where space is limited and only low current ratios with weak fusing are available.KB 3 (3 l, wall installation) and KB 6 (6 l, ground installation) are low-pressure boilers and can be connected with a hose to submersible pumps without a check valve or to any other water system with a suitable fitting. Heatable from approx. 35 °C to approx. 85 °C, mixable to approx. 3 times the quantity at full heating, less power consumption and fast reheating with good insulation. The boilers are made of high-quality plastic, heat- and corrosion-resistant. Quick and easy assembly with mounting bracket.Fast heatingLow-pressure boilerLow power consumptionFrost monitor for winter operationWater connection 10 mmTÜV-approved5 years warrantyScope of delivery: adjustable thermostat, frost monitor and overheating protection, 1 m cable.Mixing valve TT (not included) for adjusting the water temperature.

For connecting two devices.

Stainless steel exhaust pipe set with silencer and outer pipe.

Flue inner part with clamps. For vehicle wall thicknesses (without outer part of flue and pipes): WK 24 up to 20 mm and WK 64 L up to 40 mm. Additionally, a WK flue outer part is required.

Flue cover for the diversion of combustion gases.

With the digital control panel Truma CP plus, you can easily and conveniently set the temperature in your vehicle. Functions such as fan speed adjustment or night reduction can be selected in no time. The climate control system ensures a constant indoor climate in any weather conditions.Technical data:Power consumption: max. 65 mA (100% backlighting) 6.5 mA – 10 mA (standby)Quiescent current consumption: 3 mA (off)

The Pundmann pressure boiler is available in 3-, 6- or 9-litre versions and heats water with a 180 W or 200 W heating element via a 12 V power supply. At a working pressure of 2.3 bar, the water stays warm for longer. The boiler automatically starts heating and switches off once the desired temperature is reached. Its compact design and ease of use make it a practical and functional device.Technical data: heating time: approx. 75 min./75 °C; water connection diameter 10 mm. Operating pressure: 2.3 bar; safety valve setting: 3.0 bar.

Truma Combi heaters combine heating and hot water functions in one appliance with an integrated stainless steel tank. They are characterised by a weight saving of 3 kg compared to older models, low consumption, a longer service life thanks to efficient combustion control, automatic altitude adjustment up to 3000 m and a uniform wall flue for all variants.Technical highlights include up to 6 combustion stages, a heat output of up to 6000 W, 10 litre water capacity and a water heating time of approx. 24 minutes. The scope of delivery includes the Combi D heater, a room temperature sensor, the Truma iNet X panel, a control panel cable, a fuel line, a dosing pump and mounting parts. Water sets and the tank connection set for Combi D as well as a wall flue set with flue gas pipe and feed pipe are available separately.Please note: Truma diesel heaters (Combi D and Combi D next generation) are approved for operation with HVO, XtL according to EN 15940 in pure form (e.g. HVO100, i.e. 100% hydrogenated vegetable oil) as well as their mixtures with pure fossil diesel fuel and B7.

Connecting piece 90/90 mm

Wall flue WKCD incl. exhaust fan and connection cable (without sound mufflers and exhaust pipes).

The Truma VarioHeat eco is the perfect heater for motorhomes, caravans and vans. This compact heater offers efficient performance and can be installed flexibly without losing valuable storage space. The installation is straightforward and space-saving. With the optional Truma E-Kit (item no.: 309/599, not included), the VarioHeat eco becomes a versatile electric heater. It is controlled via the digital control panel Truma CP plus VarioHeat. Enjoy a pleasant temperature and maximum comfort on all your travels.Technical data: Nominal heat output:Level 1/2: 1300/2800 W Air conveyance:Level 1/2: 75/155 m³/h Gas consumption (propane/butane):Level 1/2: 100/220 g/h Current consumption (12 V):Level 1/2: 0.65/2.75 A The delivery includes a 6 m long cable, a room temperature sensor, a mounting bracket and accessories for the electrical connection.

End piece nut EM.

This high power electrical heating cartridge protects a water volume of about 40 l from freezing at temperatures down to -25 °C. Extremely reliable high-tech product, absolutely stainless, made of specially treated stainless steel with brass nut and gasket, overheating protection. For an easy installation into all fresh and waste water tanks. If the water temperature drops to about 5 °C, the frost monitor starts heating the water. Once the water reaches a temperature of about 10 °C, the frost monitor stops heating.Technical data: 30 W during heating, reverse polarity protection, built-in thermostat with dry and overheat protection.

Standard casing (only in connection with the new Truma S 3004), gas control panel button, cover and upper cover.

For 10 mm hose systems.

The Pundmann pressure boiler is available in 3-, 6- or 9-litre versions and heats water with a 180 W or 200 W heating element via a 12 V power supply. At a working pressure of 2.3 bar, the water stays warm for longer. The boiler automatically starts heating and switches off once the desired temperature is reached. Its compact design and ease of use make it a practical and functional device.Technical data: heating time: approx. 75 min./75 °C; water connection diameter 10 mm. Operating pressure: 2.3 bar; safety valve setting: 3.0 bar.

The Pundmann pressure boiler is available in 3-, 6- or 9-litre versions and heats water with a 180 W or 200 W heating element via a 12 V power supply. At a working pressure of 2.3 bar, the water stays warm for longer. The boiler automatically starts heating and switches off once the desired temperature is reached. Its compact design and ease of use make it a practical and functional device.Technical data: heating time: approx. 75 min./75 °C; water connection diameter 10 mm. Operating pressure: 2.3 bar; safety valve setting: 3.0 bar.