Magnetic valve suitable for the Modular Heating System 1.0. For switching from winter to summer operation.
Perfect air distributionA pleasant indoor climate does not only depend on the temperature. Warm air has to be distributed evenly inside the vehicle for you to feel comfortable in your living area.Convenient: infinitely adjustable fan powerFlexible: air distribution in a modular systemConnection for air duct ÜR ø 65 mm or VR ø 72 mm. For Truma S 5004/S 3004.
For Truma(tic) S 2200, Trumatic S 3002 from 05/96, Trumatic S 5002 from 05/98, Truma S 3004 and Truma S 5004. The battery is not included.
For caravans with special constructions or for locations with extreme wind conditions. With flue cover KD. 45 cm (4 pieces).
Standard casing (only in connection with the new Truma S 3004), gas control panel button, cover and upper cover.
The pipe ÜR 3 offers a reliable solution for air conveyance, ø 65 mm.
Variants from €30.00*
Perfect air distributionA pleasant indoor climate does not only depend on the temperature. Warm air has to be distributed evenly inside the vehicle for you to feel comfortable in your living area.Convenient: infinitely adjustable fan powerFlexible: air distribution in a modular systemConnection for air duct ÜR ø 65 mm or VR ø 72 mm. For Truma S 5004/S 3004.
Variants from €269.00*
The feed pipe provides a safe and efficient air supply, ideal for use in ventilation and heating systems.
Comfort package AXK-2 with Airmix for all Truma and Trumavent fans from 05/96 on, except Multivent. Not for motorhomes or heaters with exhaust system under floor.
The exhaust pipe AE 3 is ideally suited for the safe discharge of exhaust gases and is reliable for use in various heating systems.
Variants from €63.80*
The complete wall flue set WK 24 for vehicle wall thicknesses up to 20 mm. Consists of: inner part of flue, 1 m exhaust pipe, 1 m feed pipe and clamps (without outer part of flue). In addition, a flue outer part WK is required.
Uses the Truma warm air distribution to lead the warm air into the awning.
Can be connected to any Truma heating system with warm air distribution
Increases the use value of your awning especially in the evening and morning hours, but particularly during the transitional period thanks to simple temperature control
Comfortable and simple operation
Extracts moisture from the awning or at least reduces it (e.g. overnight, 300 – 500 W at continuous operation is sufficient)
During winter camping, items in the awning (e.g. ski shoes) can be preheated pleasantlyScope of delivery: warm air diffuser with hatch, fan T-piece, string lock with slider, 1 m warm air distribution pipe
The heating foil, originally developed for space technology, offers reliable protection at outside temperatures as low as -40 °C.Low power consumption thanks to temperature-controlled switching levelsInsulating special foam for excellent thermal conductivityInsensitive to stone impact, as the heating wire covers only approx. 15% of the surface areaOverheating-proof, thermostatically controlled with special adhesive coatingEasy to install by gluing onto all freshwater/wastewater tanks, even with uneven surfaces and protrusionsIf the temperature at the tank drops below 7 °C, the ULTRAHEAT tank heater heats the water. From a temperature of 19 °C, the heating process is automatically terminated.
Variants from €102.00*
For securing gas and water tanks, including underfloor tanks. Load capacity per tensioning strap: 150 kg.The self-assembly kit consists of:1 steel tensioning strap; dimensions (L x W): 450 x 2.7 cm2 height adjustment pieces, zinc-plated for M82 eye bolts M8 x 25 mm, zinc-plated2 threaded screws M8/45 mm, zinc-plated4 threaded screws M8/25 mm, zinc-plated6 nuts M8, zinc-plated12 washers M8
The water set consists of FrostControl and elbow connectors.
For the heaters Truma S 5004, Trumatic S 5002, for roof thicknesses up to 12 cm.
End piece with air flap, suitable for fan-T LT, end piece nut EM and pipes ø 65 mm.
Especially for caravans.The 5 l water heater provides hot water in the smallest dimensions. It uses the warm air distribution to heat water. The heater can be used without using the heating, as it is equipped with an electric heating element (230 V/300 W).Scope of delivery: control panel, drain and vent valve (without mixing valve)Technical data: heating-up time from 15 °C to 60 °C approx. 50 min; power supply: 230 V ~ 50 Hz; power consumption: 1.3 A (300 W); thermal cutout: 65 °C; pressure: max. 1.2 bar
Valve for mixing service water up to the set temperature (temperature range 30 – 48 °C).
Automatic safety gas pressure switch system for operating two-cylinder systems in motorhomes and caravans while travelling, for direct connection to the gas cylinders.
Consists of: central and switchover regulator with mechanical crash sensor with new pendulum solution and manometer, hose lines and regulator brackets.
The Truma e-kit adds electric heating to the Truma VarioHeat. You can control both devices via the control panel Truma CP Plus VarioHeat or the Truma App.Technical data E-KitNominal heat output: level 1 – 900 W, level 2 – 1800 WPower consumption: 12 V, approx. 150 mA, 230 V level 1 – 3.9 A, level 2 – 7.8 A
The warm air hose set for mobile parking heaters can be used to transfer warm air into the tent or into small rooms. The set consists of a carry bag with 4 m of weather-resistant neoprene hose, clamps for attaching the hose to the tent and clamps for attaching the hose to the heater.
Complete wall flue set WK 64 L for vehicle wall thicknesses up to 40 mm. Consists of: inner part of flue, 1 m exhaust pipe, 1 m feed pipe and clamps (without outer part of flue). In addition, a flue outer part WK is required.
The mobile parking heater Autoterm 2D by Pundmann in 3 variations. Be it in a roof tent, in small quarters, in a tent or generally when camping, it is the ideal companion for outdoor enthusiasts. Due to its small dimensions and the small capacity of 40 litres, the heater can easily be stowed in the boot and is therefore always with you. Two handles make it easy to carry the heater from one place to another. Incl. remote control and Anderson plug for charging other devices. Ideal for rooms up to 20 m².Technical data: Heat output: 0.8 to 2 kW; consumption: 0.10 l/h to 0.24 l/h.
The mobile parking heater Autoterm 2D by Pundmann in 3 variations. Be it in a roof tent, in small quarters, in a tent or generally when camping, it is the ideal companion for outdoor enthusiasts. Due to its small dimensions and the small capacity of 40 litres, the heater can easily be stowed in the boot and is therefore always with you. Two handles make it easy to carry the heater from one place to another. Incl. remote control and Anderson plug for charging other devices. Ideal for rooms up to 20 m².Technical data: Heat output: 0.8 to 2 kW; consumption: 0.10 l/h to 0.24 l/h.
Variants from €1,049.00*
The AZR branch pipe enables the efficient distribution of air or gas in various systems. Easy to integrate and durable – the perfect choice for reliable piping installations.
Variants from €13.90*
The flue extension ensures safe and reliable exhaust gas discharge when the Truma heating system is roof-mounted.
