Lightweight construction. Material: steel. Incl. cutting ring for steel pipes.

For use in pipes or fittings. Mounted with nut and cutting ring.

Ball valve with attachment. Maximum permissible pressure: PS 5 to 20 bar.

The plug-in coupling SKU-QR is equipped with an ergonomic, non-slip handle that makes it easy to connect and disconnect. When you disconnect the coupling, the gas passage is shut off. The sealing plug prevents the ingress of dirt and animals when the coupling is not in use. Additionally, the plug-in coupling is tamper-proof thanks to a special device – unlocking it is only possible using a standardised STN plug-in nipple.

Spare part water parts for Truma electric boiler (05/04 – 12/14).

Quick-closing fitting, only fully open or closed position. Incl. clips with symbols for labelling the appliances and dummy plugs in the outlet. DIN-DVGW type examination certificate.

Suitable for the plug-in coupling type SKU-QR.

(2017/01 – …)

Spare part for Truma boilers B and BN 30 mbar series 3 (07/93 – 12/14).

For connecting a pressure regulator with German connection to the gas cylinders commonly used in Europe. AG KLF (G. 12) x IG W 21.8 x 1/14 LH: Belgium, UK, France, Ireland, Croatia, Latvia, Luxembourg, Macedonia, Montenegro, the Netherlands, Switzerland, Serbia, Slovakia, Slovenia, Spain and the Czech Republic.

Pipe connection 8 mm, brass.

Gardena, outlet pressure 1.4 bar, closing pressure 1.1 bar

Quick closing valve according to DIN 4817-1, can only be fully opened or closed. Incl. blind plug and symbol stickers. DIN-DVGW-tested.

Distribution block with ergonomic tilting lever for easy operation. Colour coding in green for open and red for closed. Low pressure loss thanks to optimised function, including mounting bracket and clips with symbols to identify the appliances.

Quick-action valve, can only be fully opened or closed. (RVS = Pipe connection)

Lightweight construction. Material: Steel. Incl. cutting ring for steel pipes.

Quick closing valve according to DIN 4817-1, can only be fully opened or closed. Incl. blind plug and symbol stickers. DIN-DVGW-tested.

Angle valve incl. hose.

For quick connection of hose lines to gas appliances without the use of tools.

Content: safety pilot valve, O-ring, nut, cutting ring

For connection to the regulator output and for the simultaneous connection of two consumption appliances to one regulator. G 1/4 left-hand union nut x 2 G 1/4 left-hand inside taper.

For cutting ring fittings with a pipe diameter of 8 mm (IG M14 x 1.5) or 10 mm (IG M16 x 1.5).

Material: unhardened steel.

For fast opening and closing, with 4 outlets (pipe coupling 8 mm), with one filler plug and symbols, DIN-DVGW-tested shut-off valve.

Quick-closing fitting, only fully open or closed position. Incl. clips with symbols for labelling the appliances and dummy plugs in the outlet. DIN-DVGW type examination certificate.

Das Ventil ist ein Original CADAC Ersatzteil. Achten Sie auf die Hersteller-Teilenummer.

The valve body is an original Truma spare part. Please check the manufacturer’s part number.

The plug-in coupling SKU-QR is equipped with an ergonomic, non-slip handle that makes it easy to connect and disconnect. When you disconnect the coupling, the gas passage is shut off. The sealing plug prevents the ingress of dirt and animals when the coupling is not in use. Additionally, the plug-in coupling is tamper-proof thanks to a special device – unlocking it is only possible using a standardised STN plug-in nipple.

It is necessary to use reinforcing sleeves (310/928) when assembling cutting ring screw connections with copper tube.Liquid gas systems on boatsLiquid gas systems on boats are standardised in DIN EN ISO 10239. This takes into account the sometimes extreme conditions such as corrosion, low or high temperatures and strong movements of the boat.

Reinforcing sleeves (310/928) must be used when assembling cutting ring screw connections with copper tube. Liquid gas systems on boats Liquid gas systems on boats are standardised in DIN EN ISO 10239. This takes into account the sometimes extreme conditions such as corrosion, low or high temperatures and strong movements of the boat.

Lightweight construction. Material: steel. Incl. steel cutting ring for steel pipes.

For the use in pipes or fittings.

Minimal pressure loss due to optimised functionColour coding of the open position (green) or closed position (red)Ergonomic tilting lever (actuating element) Incl. mounting bracket and clips with symbols for labelling the appliances Incl. filler plug in the outletMaterial seals: NBRMaterial tilting lever: PA6 GF30 With union nut type M and cutting ring type D

Minimal loss of pressure thanks to optimised functionActuating element: ergonomic tilting lever made of PA6 GF30 Colour coding of the open (green) or closed position (red) Incl. filler plug in the outlet and clips with symbols for labelling the appliancesIncl. mounting bracketWith union nut type M and cutting ring type D Material (seals): NBR

Quick-closing fitting, only fully open or closed position. Incl. clips with symbols for labelling the appliances and dummy plugs in the outlet. DIN-DVGW type examination certificate.

For cutting ring fittings with a pipe diameter of 8 mm (IG M14 x 1.5) or 10 mm (IG M16 x 1.5).

The spout is an original Truma spare part. Please check the manufacturer’s part number.

Content: safety pilot valve, O-ring, nut, cutting ring

Quick-action valve, only fully opened or closed position. RST 8 x RVS 8 (RST = pipe nozzle, RVS = pipe coupling).

Magnetic Valve Set for Combi 4 (E) and Combi 6 (E).

Distribution block with ergonomic tilting lever for easy operation. Colour coding in green for open and red for closed. Low pressure loss thanks to optimised function, including mounting bracket and clips with symbols to identify the appliances.

Lightweight construction. Material: steel. Incl. steel cutting ring for steel pipes.

Suitable for the Carri Chef 2 series.

Filling nozzle D4 for filling German gas cylinders at authorised European filling stations. Belgium, England, France, Ireland, Latvia, Luxembourg, Macedonia, Montenegro, Netherlands, Switzerland, Serbia, Slovakia, Slovenia, Spain and the Czech Republic.

Actuating element: ergonomic tilting lever Colour coding: open position (green) and closed position (red) Low pressure loss thanks to optimised design With filler plug in the outlet and mounting bracket Incl. union nut type M and cutting ring type DIncl. clips with symbols for labelling the appliancesSeals made of NBRTilting lever made of PA6 GF30

Lightweight construction. Material: steel. Incl. cutting ring for steel pipes.

The plug-in coupling SKU-QR is equipped with an ergonomic, non-slip handle that makes it easy to connect and disconnect. When you disconnect the coupling, the gas passage is shut off. The sealing plug prevents the ingress of dirt and animals when the coupling is not in use. Additionally, the plug-in coupling is tamper-proof thanks to a special device – unlocking it is only possible using a standardised STN plug-in nipple.

Quick-closing fitting, only fully open or closed position. Incl. clip with symbols. Colour coding of the open (green) or closed (red) position.