For connecting fittings, consumption devices and pipes. DVGW-tested. Plastic hose line with textile inlay. Not cold-resistant. Hose dimensions: 6.3 x 3.5 mm.

High-pressure hose line with hose rupture protection for connection to a safety gas pressure regulator such as the Caramatic DriveOne or Caramatic DriveTwo, especially for gas supply while driving to the gas cylinder valve.

Automatic safety gas pressure switch system for operating two-cylinder systems in motorhomes and caravans while travelling, for direct connection to the gas cylinders. Consists of: central and switchover regulator with mechanical crash sensor with new pendulum solution and manometer, hose lines and regulator brackets.

The Truma G.7 high-pressure hose with SBS increases the safety of gas systems, fulfils legal standards and stops the flow of gas in the event of damage. Designed for use in the UK and Ireland, it supports safety when travelling and at the place of use.

For maximum security on the road and at the campsite, Truma offers high-pressure hoses equipped with hose rupture protection (SBS). They meet all legal requirements for running gas systems while driving but are also suitable for stationary use. If the hose is damaged, the protection is triggered and stops the gas flow.

High-pressure hose line with hose rupture protection for connection to a safety gas pressure regulator such as the Caramatic DriveOne or Caramatic DriveTwo, especially for gas supply while driving to the gas cylinder valve.

For connecting fittings, consumption devices and pipes. DVGW-tested. Rubber hose with textile inlay. Cold-resistant down to -30 °C. Hose dimensions: 6.3 x 3.5 mm.

High-pressure hose line for connection to all wall-mounted low pressure regulators or switchover systems such as Caramatic BasicOne, Caramatic ProTwo or Caramatic SwitchTwo with inlet AG M20 x 1.5. Europe-wide use possible thanks to high-pressure hose lines with country-specific connectors. Hose: rubber with textile insert, bottle connector x regulator connector, cold-resistant down to -30 °C.Dimensions DE/AT/PL/GB/CH/BE: 6.3 x 3.5 mmDimensions FR: 6.6 x 4.0 mmPlease note: the hose line with a length of 750 mm may only be used for cylinder holders with a pull-out mechanism.

Plastic-coated. In two sizes: ø 8 x 1 and ø 10 x 1.

For connecting fittings, consumption devices and pipes. DVGW-tested. Hose line: rubber with textile insert. Cold-resistant down to -30 °C. Hose dimensions 6.3 x 3.5 mm.

High-pressure hose line with hose rupture protection for connection to a safety gas pressure regulator such as the Caramatic DriveOne or Caramatic DriveTwo, especially for gas supply while driving to the gas cylinder valve.

For connection to fittings, consumer appliances and pipelines. Brass connectors with stainless steel ferrules Rubber hose line with textile insert Resistant to corrosion

For connecting fittings, consumption devices and pipes. DVGW-tested. Rubber hose with textile inlay. Cold-resistant down to -30 °C. Hose dimensions 6.3 x 3.5 mm.

For connecting fittings, consumption devices and pipes. DVGW-tested. Rubber hose with textile inlay. Cold-resistant down to -30 °C. Hose dimensions: 6.3 x 3.5 mm.

Operated with 2 x 445 g or 500 g EN417 thread cartridges (not included) Each cartridge can be inserted individually and all cartridges supply the appliance with gas. 1 kg can supply a small barbecue with gas for approx. 10 hours

Operated with 2 x 445 g or 500 g EN417 thread cartridges (not included) Each cartridge can be inserted individually and all cartridges supply the appliance with gas. 1 kg can supply a small barbecue with gas for approx. 10 hours

Safety gas pressure regulating system for the operation of dual cylinder systems in recreational vehicles for direct connection to the gas cylinder. Consists of: Central regulator with overpressure safety device S2SR (ÜDS), safety relief valve PRV and changeover regulator with mechanical crash sensor featuring a new pendulum solution and pressure gaugeMedium-pressure hose connections to connect the two regulators as well as medium-pressure hose G 1/4 LH-ÜM x RVS 10 x 450 mm for connecting the system to the vehicle's supply lineAdapter for connection to 8 mm piping and regulator bracketsIdeal for use in Germany.

Safety gas pressure regulating system for operating single-cylinder systems in recreational vehicles for direct connection to the gas cylinder.Consists of:Low-pressure regulator with overpressure safety device S2SR (ÜDS) and mechanical crash sensor with new pendulum solutionMedium pressure hose line G 1/4 LH-ÜM x RVS 10 x 450 mm for connecting the system to the vehicle's supply lineAdapter for connection to 8 mm piping and regulator bracketsIdeal for use in Germany.

The Truma G.2 high-pressure hose guarantees a high level of safety thanks to the hose rupture protection and fulfils all legal requirements for mobile and stationary use of gas systems in France and Switzerland.

High-pressure hose line with hose rupture protection for connection to a safety gas pressure regulator such as the Caramatic DriveOne or Caramatic DriveTwo, especially for gas supply while driving to the gas cylinder valve.

The Truma G.10 high-pressure hose with SBS ensures a high level of safety in mobile and stationary gas systems, fulfils legal requirements for operation while driving and immediately interrupts the gas flow in the event of damage. It was developed for Sweden, Norway, Iceland and Portugal and ensures safe travelling.

For connection to fittings, consumer appliances and pipelines. Brass connectors with stainless steel ferrules Rubber hose line with textile insert Resistant to corrosion

Corrosion-resistant medium-pressure hose line (rubber with textile insert; cold-resistant down to -30 °C; hose dimensions 6.3 x 3.5 mm) G 3/8 LH coupling nut x G 3/8 LH coupling nut (400/1500 mm). For Caramatic PS.

High-pressure hose line with hose rupture protection for connection to a safety gas pressure regulator such as the Caramatic DriveOne or Caramatic DriveTwo, especially for gas supply while driving to the gas cylinder valve.