Consists of: low pressure regulator type EN61 without manometer, 1.5 kg/h, 50 mbar and plastic medium-pressure hose line 400 mm down to -20 °C, G ¼ left-hand thread union nut on both sides and MiniTool. For private outdoor use only!

Low pressure regulator for direct connection to the liquid gas cylinder with safety relief valve PRV.

Automatic safety gas pressure switch system for operating two-cylinder systems in motorhomes and caravans while travelling, for direct connection to the gas cylinders. Consists of: central and switchover regulator with mechanical crash sensor with new pendulum solution and manometer, hose lines and regulator brackets.

Automatic regulator changeover for connection to gas cylinders, for pressure regulation to the nominal pressure of the gas appliance.Advantages and features:With safety relief valve PRVEquipped with an adapter piece for connection to 10 mm pipesCheck valve prevents the gas flow from breaking through when changing cylindersMedium-pressure hose (rubber with textile insert; cold-resistant down to -30 °C; hose dimensions 6.3 x 3.5 mm) G 3/8 LH-ÜM x G 3/8 LH-ÜM x 400 mm for connecting the two regulators, brass connections, stainless steel ferrulesMedium-pressure hose (rubber with textile insert; cold-resistant down to -30 °C; hose dimensions 6.3 x 3.5 mm) G 1/4 LH-ÜM x RVS 8 x 400 mm for connecting the system to the pipe, brass connections, stainless steel ferrulesConnectors to 8 or 10 mmCombination connection for optional connection to 5, 11 or 33 kg gas cylindersIncl. MiniTool for connecting and disconnecting regulatorsTechnical data:Connections: Input: Combi.WOutput: central regulator: G 1/4 LH-KNSwitchover regulator: G 3/8 LH-KNOutlet pressure: central regulator: 30 or 50 mbarSwitchover regulator: 150 mbar

Caramatic TwoControl with transmitter for remote display and regulator heater Eis-Ex.

Combination connection to gas cylinders (5/11/33 kg), for pressure regulation to the nominal pressure of the gas appliance. Version with pressure setting scale for reproducible setting of the outlet pressure. With hose rupture protection. (1.5 bar, 12 kg/h).

The regulators are ideal for gas boxes and small camping vehicles where space is limited. In the VW camper vans by Westfalia, the regulator with the L-shape was installed until 2005. For vehicles built since 2006, the regulator with the U-shape is used. Nominal flow: 0.8 kg/h.U-shape: thanks to the U-shape, the transition to the hose is located at the base of the gas cylinder and therefore does not extend beyond the gas cylinder.L-shape: thanks to the L-shape (90° angle), the hose is guided downwards and needs less space than conventional regulators.

Barbecue regulator BASIC for connection to gas cylinders, specially designed for gas barbecues.

For connection to cylinders or for gas containers permanently attached to the vehicle, for pressure regulation of the nominal pressure of the gas device.Consists of: low pressure regulator, safety relief valve PRV, toggle valve and plug-in coupling SKU with shut-off valve for leak testing and supplying external gas devices, e.g. a gas barbecue.

Safety gas pressure control system for the operation of one-cylinder systems in recreational vehicles while driving. Consists of: low-pressure regulator with overpressure safety device S2SR (ÜDS), mechanical crash sensor with a new pendulum solution, test device and wall bracket.

The regulators are ideal for gas boxes and small camping vehicles where space is limited. In the VW camper vans by Westfalia, the regulator with the L-shape was installed until 2005. For vehicles built since 2006, the regulator with the U-shape is used. Nominal flow: 0.8 kg/h.U-shape: thanks to the U-shape, the transition to the hose is located at the base of the gas cylinder and therefore does not extend beyond the gas cylinder.L-shape: thanks to the L-shape (90° angle), the hose is guided downwards and needs less space than conventional regulators.

Caramatic TwoControl with regulator heater Eis-Ex

Gas pressure regulator with crash sensor for one gas cylinder, wall or ceiling installation.

Only for camping. In the bottle crate, only the caravan low pressure regulators 310/711, 310/712, 310/713 may be used. Suitable for all propane gas cylinders 5 and 11 kg.

Safety gas pressure control system for operating one-cylinder systems in caravans and motorhomes while driving.Consists of:Low pressure regulator with excess pressure protection S2SR (ÜDS)Mechanical crash sensor with pendulum solutionTest device and wall bracketCaramatic ConnectClean with angle bracketCaramatic ConnectDriveAdvantages and features: gas supply while driving thanks to integrated mechanical crash sensor with a pendulum solution, which shuts off the gas flow in the event of an accident with a deceleration of 3.5 g ± 0.5 g acting directly on the trigger element. This corresponds to an impact speed of approx. 15 to 20 km/h on a fixed obstacle with an average vehicle weight.Please note: complies with the requirements of DGUV Regulation 110-010 (German Social Accident Insurance – previously DGUV Regulation 79) and is suitable for use in commercially used caravans and motor caravans!

Operated with 2 x 445 g or 500 g EN417 thread cartridges (not included) Each cartridge can be inserted individually and all cartridges supply the appliance with gas. 1 kg can supply a small barbecue with gas for approx. 10 hours

Quick-action valve, only fully opened or closed position. RST 8 x RVS 8 (RST = pipe nozzle, RVS = pipe coupling).

Barbecue regulator PRO for connection to gas cylinders, specially designed for gas barbecues.

Safety gas pressure control system for the operation of one-cylinder systems in recreational vehicles while driving. Consists of: low-pressure regulator with overpressure safety device S2SR (ÜDS), mechanical crash sensor with a new pendulum solution, test device and wall bracket.

Operated with 2 x 445 g or 500 g EN417 thread cartridges (not included) Each cartridge can be inserted individually and all cartridges supply the appliance with gas. 1 kg can supply a small barbecue with gas for approx. 10 hours

Safety gas pressure regulating system for the operation of dual cylinder systems in recreational vehicles for direct connection to the gas cylinder. Consists of: Central regulator with overpressure safety device S2SR (ÜDS), safety relief valve PRV and changeover regulator with mechanical crash sensor featuring a new pendulum solution and pressure gaugeMedium-pressure hose connections to connect the two regulators as well as medium-pressure hose G 1/4 LH-ÜM x RVS 10 x 450 mm for connecting the system to the vehicle's supply lineAdapter for connection to 8 mm piping and regulator bracketsIdeal for use in Germany.

Truma gas pressure regulators are characterised by their particularly compact and lightweight design. The crash sensor (CS) has been optimised: if the regulator has been triggered, this is indicated by the yellow button. The Truma CS gas pressure regulators can be used both when stationary and when travelling. Reliable: operate gas appliances safely even when travelling – thanks to the integrated crash sensor. Convenient: easily recognise and reset a triggered crash sensor. Practical: indicates which cylinder is in operation and therefore full or empty (DuoControl CS). Lightweight: low weight. Technical data: gas type: liquid gas (propane/butane); inlet pressure: 0.7 – 16 bar; outlet pressure: 30 mbar; regulator output: 1.5 kg/h; regulator inlet: external thread M 20 x 1.5 (G.13); regulator outlet: cutting ring fitting 10 mm or 8 mm (H.9).

With wall bracket for connection to gas cylinders via high-pressure hose line. With safety relief valve PRV.

Safety gas pressure regulating system for operating single-cylinder systems in recreational vehicles for direct connection to the gas cylinder.Consists of:Low-pressure regulator with overpressure safety device S2SR (ÜDS) and mechanical crash sensor with new pendulum solutionMedium pressure hose line G 1/4 LH-ÜM x RVS 10 x 450 mm for connecting the system to the vehicle's supply lineAdapter for connection to 8 mm piping and regulator bracketsIdeal for use in Germany.

Safety gas pressure control system with automatic switch valve for operating two-cylinder systems in recreational vehicles while driving. The system automatically switches to the gas cylinder on the reserve side as soon as the gas cylinder on the operating side is empty. The display on the gas regulator shows which gas cylinder is being used. It is possible to change the cylinder without interrupting operation. Consists of: automatic switch valve, low-pressure regulator with safety relief valve PRV, mechanical crash sensor with a pendulum solution, control knob, operating and reserve indicator, check valve, test device and wall bracket.

Safety gas pressure control system with automatic switch valve for operating two-cylinder systems in caravans and motorhomes while driving. For connection to gas cylinders via high-pressure hose line and for pressure control to the nominal pressure of the gas device.Consists of:Automatic switch valveLow pressure regulator with safety relief valve PRVMechanical crash sensor with pendulum solutionControl knobOperating and reserve indicatorCheck valveTest device and wall bracket2 x Caramatic ConnectClean with angle bracket2 x Caramatic ConnectDriveAdvantages and features: gas supply while driving thanks to integrated mechanical crash sensor with a pendulum solution, which shuts off the gas flow in the event of an accident with a deceleration of 3.5 g ± 0.5 g acting directly on the trigger element. This corresponds to an impact speed of approx. 15 to 20 km/h on a fixed obstacle with an average vehicle weight.

For connection to gas cylinders. Controls the nominal pressure of the gas device. Consists of: low pressure regulator with safety devices type EN61-DS (50 mbar), medium-pressure hose line (hose dimensions 6.3 x 3.5 mm) G 1/4 LH-ÜM x RVS 8 x 400 mm. Connecting pipe and angled screw-on connection type WAI IG G 1/2 x RVS 8.Advantages and features:Set for connecting a household appliance, e.g. a stove, to a gas cylinder. The connecting pipe 8 x 1 x 400 mm can be reduced to the desired length depending on the installation circumstances. Approval: Individual fittings DIN-DVGW- or DVGW-tested or with EC type examination.

The Caramatic DriveOne and DriveTwo gas pressure control systems enable heating while driving by means of an integrated mechanical crash sensor that blocks the gas in the event of an accident with a delay of 3.5 g ± 0.5 g acting directly on the trigger element. For an average vehicle weight, this corresponds to an impact speed of approx. 15 to 20 km/h on a solid obstacle.Europe-wide use possible with country-specific high-pressure hose lines – Caramatic ConnectDrive (not included in delivery)Test device for leak testing of the liquid gas installation without dismantling the pressure regulating deviceVersion with outlet connection RVS 10 / 8 is equipped as standard with a transition piece for connection to 8 mm pipes.Nominal flow: 1.5 kg/h.Caramatic DriveOneSafety gas pressure control system for the operation of one-cylinder systems in recreational vehicles while driving.Consists of: low-pressure regulator with overpressure safety device S2SR (ÜDS), mechanical crash sensor and test device

The regulators are ideal for gas boxes and small camping vehicles where space is limited. In the VW camper vans by Westfalia, the regulator with the L-shape was installed until 2005. For vehicles built since 2006, the regulator with the U-shape is used. Nominal flow: 0.8 kg/h.U-shape: thanks to the U-shape, the transition to the hose is located at the base of the gas cylinder and therefore does not extend beyond the gas cylinder.L-shape: thanks to the L-shape (90° angle), the hose is guided downwards and needs less space than conventional regulators.

Safety gas pressure control system for operating one-cylinder systems in caravans and motorhomes while driving.Consists of:Low pressure regulator with excess pressure protection S2SR (ÜDS)Mechanical crash sensor with pendulum solutionTest device and wall bracketCaramatic ConnectClean with angle bracketCaramatic ConnectDriveAdvantages and features: gas supply while driving thanks to integrated mechanical crash sensor with a pendulum solution, which shuts off the gas flow in the event of an accident with a deceleration of 3.5 g ± 0.5 g acting directly on the trigger element. This corresponds to an impact speed of approx. 15 to 20 km/h on a fixed obstacle with an average vehicle weight.Please note: complies with the requirements of DGUV Regulation 110-010 (German Social Accident Insurance – previously DGUV Regulation 79) and is suitable for use in commercially used caravans and motor caravans!

For connection to gas cylinders, for the operation of gas appliances. Consists of: low-pressure regulator, medium-pressure hose 1500 mm (rubber with textile insert; cold-resistant to -30 °C; hose dimensions 6.3 x 3.5 mm), plug-in coupling SKU-QR, plug-in nipples STN and MiniTool.

For manual shifting of two-cylinder systems. For installation in pipes. Advantages and features: Alternating removal, gas cylinders can be replaced with no interruption of operation Simultaneous connection of two gas cylinders Conformity: EU type examination according to GGR

Convenient information and control unit for monitoring the operating and backup cylinders of the Caramatic BasicTwo two-cylinder system in motorhomes and caravans as well as on boats.Remote indication of the operating status (normal or standby operation) of the gas cylinders.Information on which of the two gas cylinders is empty and needs to be changedFor easy installation in new systems or for retrofitting in existing systemsCan be used with the Caramatic BasicTwo two-cylinder systemConnection of all components via connector system, no soldering necessaryInformation and control unit including 6 m connection cable and cover framePressure and reed sensor for remote indication with connection cable 2 m

Consists of: 2 x Caramatic ConnectBasic (length: 450 mm), 2 x Caramatic ConnectClean 2.0 with bracket, automatic switch valve, low-pressure regulator with PRV safety relief valve, control knob, operating and reserve indicator, check valve, test device and wall bracket.

For connection to Campingaz bottles for pressure regulation to the nominal pressure of the gas appliance with shut-off valve.

For connection to gas cylinders in the industrial sector. With excess pressure protection. Suitable for connection to 5 or 11 kg gas cylinders. 1.5 kg/h. Please note: according to system diagram F1, low pressure regulators must be equipped with a pressure gauge. Pressure regulators with an outlet pressure of 30 mbar are not suitable for use in Germany!

For connection to gas cylinders, for pressure regulation to the nominal pressure of the gas appliance

Consists of: low pressure regulator type EN61-DS with manometer, 1.5 kg/h, 50 mbar and rubber medium-pressure hose line 400 mm, down to -30 °C, with G ¼ left-hand thread union nut on both sides and MiniTool. Mandatory for all commercial and private small bottle devices (e.g. catalytic or infrared) indoors, as well as commercial small bottle devices outdoors.

Safety gas pressure control system with automatic switch valve for operating two-cylinder systems in recreational vehicles while driving. The system automatically switches to the gas cylinder on the reserve side as soon as the gas cylinder on the operating side is empty. The display on the gas regulator shows which gas cylinder is being used. It is possible to change the cylinder without interrupting operation. Consists of: automatic switch valve, low-pressure regulator with safety relief valve PRV, mechanical crash sensor with a pendulum solution, control knob, operating and reserve indicator, check valve, test device and wall bracket.

With wall bracket for connection to gas cylinders via high-pressure hose line. With safety relief valve PRV.

For connection to Campingaz bottles for pressure regulation to the nominal pressure of the gas appliance with shut-off valve.

Truma gas pressure regulators are characterised by their particularly compact and lightweight design. The crash sensor (CS) has been optimised: if the regulator has been triggered, this is indicated by the yellow button. The Truma CS gas pressure regulators can be used both when stationary and when travelling. Reliable: operate gas appliances safely even when travelling – thanks to the integrated crash sensor. Convenient: easily recognise and reset a triggered crash sensor. Practical: indicates which cylinder is in operation and therefore full or empty (DuoControl CS). Lightweight: low weight. Technical data: gas type: liquid gas (propane/butane); inlet pressure: 0.7 – 16 bar; outlet pressure: 30 mbar; regulator output: 1.5 kg/h; regulator inlet: external thread M 20 x 1.5 (G.13); regulator outlet: cutting ring fitting 10 mm or 8 mm (H.9).

For connection to gas cartridges with screw-on thread without integrated hose rupture device.

Safety gas pressure regulating system for operating one-cylinder systems in motorhomes and caravans while travelling, for direct connection to the gas cylinder. Consists of: mechanical crash sensor with new pendulum solution, low pressure regulator with overpressure safety device S2SR (ÜDS), hose line and regulator brackets.

For connection to gas cylinders, for pressure regulation to the nominal pressure of the gas appliance.With safety relief valve PRVAir vents that also prevent the ingress of moistureVersion with pressure gauge suitable for connection to Eis-Ex

For connection to gas cylinders, for pressure regulation to the nominal pressure of the gas appliance

Automatic switch valve with integrated low pressure regulator for connecting two gas cylinders in caravans and motorhomes. The system automatically switches to the reserve gas cylinder as soon as the gas cylinder being used is empty. The display on the gas regulator shows which gas cylinder is being used. It is possible to change the cylinder without interrupting operation. Consists of: automatic switch valve, low pressure regulator with safety relief valve PRV, control knob, operating and reserve display, check valve, testing device and wall bracket (hose line not included in delivery) Please note: applicable without restriction for end-of-life vehicles! Technical data: input connection: 2 x AG M20 x 1.5; outlet connection: RVS 8 for 50 mbar version, RVS 10/8 for 30 mbar version; nominal flow: 1.5 kg/h;

The Caramatic DriveOne and DriveTwo gas pressure control systems enable heating while driving by means of an integrated mechanical crash sensor that blocks the gas in the event of an accident with a delay of 3.5 g ± 0.5 g acting directly on the trigger element. For an average vehicle weight, this corresponds to an impact speed of approx. 15 to 20 km/h on a solid obstacle.Europe-wide use possible with country-specific high-pressure hose lines – Caramatic ConnectDrive (not included in delivery)Test device for leak testing of the liquid gas installation without dismantling the pressure regulating deviceVersion with outlet connection RVS 10 / 8 is equipped as standard with a transition piece for connection to 8 mm pipes.Nominal flow: 1.5 kg/h.Caramatic DriveOneSafety gas pressure control system for the operation of one-cylinder systems in recreational vehicles while driving.Consists of: low-pressure regulator with overpressure safety device S2SR (ÜDS), mechanical crash sensor and test device