Made of winter resistant tarpaulin with sewn-on textile grip-strip. The tandem versions are made in two parts and have a Velcro fastener. Height 85 cm, weight about 430 g/m².

Made of winter resistant tarpaulin with sewn-on textile grip-strip. The tandem versions are made in two parts and have a Velcro fastener. Height 85 cm, weight about 430 g/m².

Single piece driver's cab cover, which is easy to install by fitting it into the slightly opened door edges and also covers the wheel housing. The impregnated cover is water- and dirt-repellent so that algae, moss and flower pollen won't find any fertile soil. To allow light to flow into the vehicle at daytime, the front flap can be opened up to the height of the mirrors. The exterior edges are diligently hemmed. Tensioning is done via the various attachment points at the bottom edge, rubber tensioners are included in the standard scope of delivery.

This thermal protection cover with integrated 10 mm polyester insulation keeps the prow and the rear of the caravan free of ice and snow and prevents possible draught. The attachment is done via Keder piping and eyelets at the lower edge for tensioning. Rubber tensioners are included in delivery.

The entire surface of the cover consists of all-over breathable Tyvek. It prevents waterlogging of the vehicle, it protects the bonnet from icing and snow and the interior from the sun’s rays and heat. The side windows are also covered to prevent unwanted views into the vehicle. The cover is lightweight, supple, remains flexible even in the cold and can be washed at 30 °C. It is easy to attach and is slipped over the doors using pockets and then is tensioned (rubber tensioners are included in delivery).

Made of winter resistant tarpaulin with sewn-on textile grip-strip. The tandem versions are made in two parts and have a Velcro fastener. Height 85 cm, weight about 430 g/m².

Innovative tent ground skirt, made of 50 cm high PVC-tarp. With its robust and waterproof sewn-in storage bag it utilises unused room underneath the caravan and generates additional storage space. Thus coolness under the vehicle can be used for hygienic storing of food or beverages or other things like toys or shoes. A dual zip closes the bag draught-proof and allows comfortable access. To avoid condensation, the bag is outfitted with anti insect mesh to care for permanent air circulation. Thanks to the welded-on grip strip, the skirt can be easily shortened from both ends. It can be combined with any standard skirt floor or vehicle specific wheel case cover (see page 284). Dimensions bag about: W 80 x H 35 x D 35 cm.

Made of winter resistant tarpaulin with sewn-on textile grip-strip. The versions for Fendt and the tandem versions are made in two parts and have a Velcro fastener. Height 85 cm, weight about 430 g/m².

Made of winter resistant tarpaulin with sewn-on textile grip-strip. The tandem versions are made in two parts and have a Velcro fastener. Height 85 cm, weight about 430 g/m².

Made of winter resistant tarpaulin with sewn-on textile grip-strip. Theversions Fendt and tandem are made of two parts and have a Velcro fastener. Height 85 cm, weight about 430 g/m².

Made of winter resistant tarpaulin with sewn-on textile grip-strip. The tandem versions are made in two parts and have a Velcro fastener. Height 85 cm, weight about 430 g/m².

Single piece driver's cab cover, which is easy to install by fitting it into the slightly opened door edges and also covers the wheel housing. The impregnated cover is water- and dirt-repellent so that algae, moss and flower pollen won't find any fertile soil. To allow light to flow into the vehicle at daytime, the front flap can be opened up to the height of the mirrors. The exterior edges are diligently hemmed. Tensioning is done via the various attachment points at the bottom edge, rubber tensioners are included in the standard scope of delivery.

Made of winter resistant tarpaulin with sewn-on textile grip-strip. The tandem versions are made in two parts and have a Velcro fastener. Height 85 cm, weight about 430 g/m².

In winter, the bow protection cover keeps the tank cover free from ice and snow, protecting the front space of the motorhome and stops possible draught. The front flap of the cover can be opened, to enable looking out the front window. The cover is installed via a retraction piping rail, attached at the lower edge are eyelets to tension (tensioning material included in delivery).

Made of winter resistant tarpaulin with sewn-on textile grip-strip. The tandem versions are made in two parts and have a Velcro fastener. Height 85 cm, weight about 430 g/m².

Breathable tarpaulin protects the front of your caravan and keeps the gas bottle box clear of ice and snow. With grip-strip and eyelets at the bottom to tighten the cover (tensioning material included in delivery). Washable at 30 °C.

Made of winter resistant tarpaulin with sewn-on textile grip-strip. The tandem versions are made in two parts and have a Velcro fastener. Height 85 cm, weight about 430 g/m².

Set of 2, to connect the special draught skirt to the wheel case cover (catalogue page 339).

Made of winter resistant tarpaulin with sewn-on textile grip-strip. Theversions Fendt and tandem are made of two parts and have a Velcro fastener. Height 85 cm, weight about 430 g/m².

Made of winter resistant tarpaulin with sewn-on textile grip-strip. The tandem versions are made in two parts and have a Velcro fastener. Height 85 cm, weight about 430 g/m².

Made of light grey, winter resistant tarpaulin with sewn-on piping fabric. Height 85 cm, weight approx. 430 g/m².

Universally fitting front protective cover made of Tyvek, available in 2 sizes. The cover protects the vehicle against dirt, snow and ice build-up and is impregnated to repel water and dirt so that algae, moss and flower pollen find no fertile ground. It is attached to the sides with eyelet lashes and rubber tensioners. A tight seal along the lower edge is provided by an integrated elastic band and by an integrated rubber tensioner along the upper edge. The tensioner is attached to mounts of the exterior mirrors which are attached at the top, or alternatively to LOXX press studs (not included in delivery).

Protects the gas bottle box against ice and snow. The cover is made of white tarpaulin, weight approx. 500 g/m², it is mounted via a piping fabric and tensioning eyelets. The cover can be cut to whatever size you need it to be simply by using a regular pair of scissors. For Knaus Südwind and Südwind Exclusive, there are special versions with three-dimensionally formed edges available.

Made of winter resistant tarpaulin with sewn-on textile grip-strip. The versions for Fendt as well as the Tandem versions are made of two pieces with an additional Velcro fastener. Height 85 cm, weight about 430 g/m².