For integrated motorhomes, made of thermal foil with all-around welted edges. The thermal mat is attached to the outside of the windscreen. An inside rubber tensioner along the upper edge provides a tight seal, 4 tensioning straps with plastic eyelets are placed on the lower edge. Included in delivery are rubber tensioners, which can be cut with a pair of scissors if needed. They are attached to the exterior mirrors which are attached at the top (1), or alternatively with the snap hooks of the rubber tensioners on optional LOXX press studs (2), which can be glued or screwed.

Precisely manufactured, two-part external insulation cover that keeps the heat inside, making it the ideal thermal insulation for winter holidays and helping to save heating costs. It consists of a separately available upper and lower part. The upper section insulates the area of the front and side windows, while the lower section covers the non-insulated engine compartment, wheel arches and footwell. The thermal cover is creating extensive external insulation for the entire cab and significantly increases living comfort on winter holidays. The integrated wind baffle protects against draughts underneath the cab. The outer surfaces of the lightweight, approx. 20 mm thick insulation (lower section approx. 10 mm) are made of weatherproof and strong PE fabric, while the polyester inner insulation does not retain moisture.The material is winterproof and can be rolled up or folded even in very cold conditions.The upper section is simply attached by hanging the pockets in the slightly open doors and fastened using the rubber tensioners provided. The lower section has an integrated Velcro strip along the upper side, which serves as a connecting element to the upper section, so that both parts form a two-part thermal mat. The front of the window mat can be opened and fitted with a separate screen insert to provide privacy from the outside. Can be used all year round.

Winterproof thermal window mat, perfectly covering the front and side windows while reducing your heating costs in winter and the temperature inside your vehicle by reduced sun radiation in summer thanks to its approx. 10 mm thick polyester insulation. The cover is characterised by its excellent insulating qualities as well as its low weight and that it can be rolled up or folded even in bitter cold. It is attached to the doors with pockets, providing a secure hold and a perfect fit. The front flap can be opened and with the optionally available "Screen" insert, the inside of your vehicle is protected against prying eyes. Rubber tensioners are included in delivery.

In winter, the bow protection cover keeps the tank cover free from ice and snow, protecting the front space of the motorhome and stops possible draught. The front flap of the cover can be opened, to enable looking out the front window. The cover is installed via a retraction piping rail, attached at the lower edge are eyelets to tension (tensioning material included in delivery).

Universally fitting front protective cover made of Tyvek, available in 2 sizes. The cover protects the vehicle against dirt, snow and ice build-up and is impregnated to repel water and dirt so that algae, moss and flower pollen find no fertile ground. It is attached to the sides with eyelet lashes and rubber tensioners. A tight seal along the lower edge is provided by an integrated elastic band and by an integrated rubber tensioner along the upper edge. The tensioner is attached to mounts of the exterior mirrors which are attached at the top, or alternatively to LOXX press studs (not included in delivery).

Precisely manufactured, two-part external insulation cover that keeps the heat inside, making it the ideal thermal insulation for winter holidays and helping to save heating costs. It consists of a separately available upper and lower part. The upper section insulates the area of the front and side windows, while the lower section covers the non-insulated engine compartment, wheel arches and footwell. The thermal cover is creating extensive external insulation for the entire cab and significantly increases living comfort on winter holidays. The integrated wind baffle protects against draughts underneath the cab. The outer surfaces of the lightweight, approx. 20 mm thick insulation (lower section approx. 10 mm) are made of weatherproof and strong PE fabric, while the polyester inner insulation does not retain moisture.The material is winterproof and can be rolled up or folded even in very cold conditions.The upper section is simply attached by hanging the pockets in the slightly open doors and fastened using the rubber tensioners provided. The lower section has an integrated Velcro strip along the upper side, which serves as a connecting element to the upper section, so that both parts form a two-part thermal mat. The front of the window mat can be opened and fitted with a separate screen insert to provide privacy from the outside. Can be used all year round.

Thermal foil as an DIY set for the own expansion for the exterior and interior. Made of bubble wrap with double-sided aluminised polyester foil. The easy to manufacture thermal foil can be used as a cold and warmth protection as well as for sun reflection and is universally applicable for camping, car, boat and house and also suitable as a tent roof or tent ground insulation. This way, the intended insulation can be customised to fit the needs exactly. The included foil to create a size and form template helps to achieve this. Delivery includes 15 large suction cups ø 40 mm each, 20 m light-grey edging stripe made of polyester as well as a foil to take off a template. Dimensions approx. L 3.5 x W 1.48 m.

Made of 5 mm foamed PVC-tarp. The top is installed via a textile Keder, the bottom via tensioning with eyelets. For increased comfort, the mat can be rolled up.

Protective cover 12M with 4 layers, specially developed for Ducato motorhomes. Made with high quality materials and finishes that guarantee effective protection of the vehicle all year round. Available in 3 sizes.

Precisely manufactured, two-part external insulation cover that keeps the heat inside, making it the ideal thermal insulation for winter holidays and helping to save heating costs. It consists of a separately available upper and lower part. The upper section insulates the area of the front and side windows, while the lower section covers the non-insulated engine compartment, wheel arches and footwell. The thermal cover is creating extensive external insulation for the entire cab and significantly increases living comfort on winter holidays. The integrated wind baffle protects against draughts underneath the cab. The outer surfaces of the lightweight, approx. 20 mm thick insulation (lower section approx. 10 mm) are made of weatherproof and strong PE fabric, while the polyester inner insulation does not retain moisture.The material is winterproof and can be rolled up or folded even in very cold conditions.The upper section is simply attached by hanging the pockets in the slightly open doors and fastened using the rubber tensioners provided. The lower section has an integrated Velcro strip along the upper side, which serves as a connecting element to the upper section, so that both parts form a two-part thermal mat. The front of the window mat can be opened and fitted with a separate screen insert to provide privacy from the outside. Can be used all year round.

Universally fitting roof protection tarp for motorhomes, made of high-quality SFS-3 tarpaulin material with a weight of approx. 160 g/m². The 3-layered material is especially breathing and water-repellent to prevent the formation of condensation and mold. Delivery includes transportation bag, guy ropes and a repair set.

Precisely manufactured, two-part external insulation cover that keeps the heat inside, making it the ideal thermal insulation for winter holidays and helping to save heating costs. It consists of a separately available upper and lower part. The upper section insulates the area of the front and side windows, while the lower section covers the non-insulated engine compartment, wheel arches and footwell. The thermal cover is creating extensive external insulation for the entire cab and significantly increases living comfort on winter holidays. The integrated wind baffle protects against draughts underneath the cab. The outer surfaces of the lightweight, approx. 20 mm thick insulation (lower section approx. 10 mm) are made of weatherproof and strong PE fabric, while the polyester inner insulation does not retain moisture.The material is winterproof and can be rolled up or folded even in very cold conditions.The upper section is simply attached by hanging the pockets in the slightly open doors and fastened using the rubber tensioners provided. The lower section has an integrated Velcro strip along the upper side, which serves as a connecting element to the upper section, so that both parts form a two-part thermal mat. The front of the window mat can be opened and fitted with a separate screen insert to provide privacy from the outside. Can be used all year round.

As an effective addition to thermal covers and curtains, these mats insulate the footwell beneath the dashboard as well as the floor space between driver's and passengers seat against cold getting in and heat getting out.

Thermal material specially developed for covering leisure vehicles. Thanks to its soft structure, it adapts perfectly to the windscreen contours and the side windows of the cabin. Features: High-quality polyester material Does not retain moisture Resistant to temperatures down to -35 °C Protects against cold and heat Cover panel can be folded down/opened to let in light UV-stable Cover can also be rolled or folded in very cold weather

As an effective addition to thermal covers and curtains, these mats insulate the footwell beneath the dashboard as well as the floor space between driver's and passengers seat against cold getting in and heat getting out.

Detachable protection against sun and prying eyes, but an uninterrupted view to the outside. 

The breathable tarpaulin is made from 3-layer SFS-3 non-woven material and is characterised by its good tear resistance and low weight. With its freely selectable length, it is universally suitable for caravans and motorhomes. This means that not only the roof, but also the front and/or rear area can be protected from rain, dirt, ice and snow and contamination from birds and trees. The tarpaulin is fitted with triangular tabs all round for attachment, to which the tensioning straps included in the scope of delivery are attached. Delivery includes repair kit and generously sized storage bag.

Single piece driver's cab cover, which is easy to install by fitting it into the slightly opened door edges and also covers the wheel housing. The impregnated cover is water- and dirt-repellent so that algae, moss and flower pollen won't find any fertile soil. To allow light to flow into the vehicle at daytime, the front flap can be opened up to the height of the mirrors. The exterior edges are diligently hemmed. Tensioning is done via the various attachment points at the bottom edge, rubber tensioners are included in the standard scope of delivery.

Includes eyelets (distance of 50 cm) for tensioning at the ground , equipped with welded, 7 mm thick piping fabric. Made of winterproof PVC tarpaulin, weight: 440 g/m², colour light grey.

Precisely manufactured, two-part external insulation cover that keeps the heat inside, making it the ideal thermal insulation for winter holidays and helping to save heating costs. It consists of a separately available upper and lower part. The upper section insulates the area of the front and side windows, while the lower section covers the non-insulated engine compartment, wheel arches and footwell. The thermal cover is creating extensive external insulation for the entire cab and significantly increases living comfort on winter holidays. The integrated wind baffle protects against draughts underneath the cab. The outer surfaces of the lightweight, approx. 20 mm thick insulation (lower section approx. 10 mm) are made of weatherproof and strong PE fabric, while the polyester inner insulation does not retain moisture.The material is winterproof and can be rolled up or folded even in very cold conditions.The upper section is simply attached by hanging the pockets in the slightly open doors and fastened using the rubber tensioners provided. The lower section has an integrated Velcro strip along the upper side, which serves as a connecting element to the upper section, so that both parts form a two-part thermal mat. The front of the window mat can be opened and fitted with a separate screen insert to provide privacy from the outside. Can be used all year round.

All-around breathable covers, which protect the vehicle from negative influences, such as rain, dirt, ice, heat or soiling caused by birds and trees. Humidity can easily evaporate via the lateral areas. The covers made of a 3-layered SFS-3 Nonwoven material (160 g/m²) are characterised by their high tear-resistance and low weight. All versions are equipped with 4 zips, which facilitate handling and enable an access to the entrance door and the storage box. Moreover, they are equipped with an eyelet strip on both sides and clamping straps at the front and back side. To find the right size, find the biggest girth, including, for example, bike carriers and all overhangs. Included in delivery are a tensioning system which is adapted specifically to each girth, a repair kit as well as a transport and storage sack.Size determinationTo choose the correct size, the largest circumference of the vehicle (girth= 2 x length + 2 x width) is measured. In doing so, all overhangs, such as bike carries, have to be taken into account. Subject to minor dimensional tolerances. The height of the hood is always approximately 35 cm lower than the overall vehicle height.

Innovative exterior cover screen, which not only provides perfect protection against the sun as well as prying eyes while viewing the outside perfectly, but which also integrates well into the vehicle's looks. The screen is hung into the door compartments at both vehicle doors and is tensioned towards the exterior mirrors or wheel housing. Rubber tensioners included in delivery.

Precisely manufactured, two-part external insulation cover that keeps the heat inside, making it the ideal thermal insulation for winter holidays and helping to save heating costs. It consists of a separately available upper and lower part. The upper section insulates the area of the front and side windows, while the lower section covers the non-insulated engine compartment, wheel arches and footwell. The thermal cover is creating extensive external insulation for the entire cab and significantly increases living comfort on winter holidays. The integrated wind baffle protects against draughts underneath the cab. The outer surfaces of the lightweight, approx. 20 mm thick insulation (lower section approx. 10 mm) are made of weatherproof and strong PE fabric, while the polyester inner insulation does not retain moisture.The material is winterproof and can be rolled up or folded even in very cold conditions.The upper section is simply attached by hanging the pockets in the slightly open doors and fastened using the rubber tensioners provided. The lower section has an integrated Velcro strip along the upper side, which serves as a connecting element to the upper section, so that both parts form a two-part thermal mat. The front of the window mat can be opened and fitted with a separate screen insert to provide privacy from the outside. Can be used all year round.

Detachable protection against sun and prying eyes, but an uninterrupted view to the outside. 

Developed specifically for the H2 high rear door dimensions of Fiat Ducato from 2006/07 on. Consisting of 2 parts with inner velour coating. Is attached via magnets to doors inside the vehicle. When the doors are closed, both parts overlap in the centre to create an efficient heat insulation in the sleeping area.

Passgenau für den hohen H2 Hecktür-Ausschnitt des Fiat Ducato ab Baujahr 2006/07 gearbeitet, erhöht der aus einer 3-lagigen Sandwichkonstruktion (Oberware 100 % Polyester, Unterware 100 % Polyurethan) gefertigte Thermovorhang den Wohnkomfort im Fahrzeug durch eine effiziente Wärmeisolierung. Die nach außen zeigende reflektierende Polyesterfolie nimmt auch bei geöffneter Hecktür keine Feuchtigkeit auf. Er kann im Randbereich problemlos eingeschnitten werden und wird entlang der Oberkante über eine zweireihige Druckknopfleiste befestigt. Der Vorhang lässt sich mit 2 Reißverschlüssen öffnen, so dass der Stauraum unterhalb des Bettes oder auch der Gasflaschenschrank bequem von außen erreichbar bleiben.

Precisely manufactured, two-part external insulation cover that keeps the heat inside, making it the ideal thermal insulation for winter holidays and helping to save heating costs. It consists of a separately available upper and lower part. The upper section insulates the area of the front and side windows, while the lower section covers the non-insulated engine compartment, wheel arches and footwell. The thermal cover is creating extensive external insulation for the entire cab and significantly increases living comfort on winter holidays. The integrated wind baffle protects against draughts underneath the cab. The outer surfaces of the lightweight, approx. 20 mm thick insulation (lower section approx. 10 mm) are made of weatherproof and strong PE fabric, while the polyester inner insulation does not retain moisture.The material is winterproof and can be rolled up or folded even in very cold conditions.The upper section is simply attached by hanging the pockets in the slightly open doors and fastened using the rubber tensioners provided. The lower section has an integrated Velcro strip along the upper side, which serves as a connecting element to the upper section, so that both parts form a two-part thermal mat. The front of the window mat can be opened and fitted with a separate screen insert to provide privacy from the outside. Can be used all year round.

The new protective covers unite 5 years of product expertise with a new, modern and attractive design which orients itself towards the standard motives of many recreational vehicles.Features:Scratch-resistant and breathing 4-layer, UV-resistant TNT fabricExcellent vehicle protection against exterior influences such as rain, sun, dust, chemical pollution, animal faeces, foliage, etc.Outstanding wind-proof attachment system thanks to robust straps and tensioning buckleWith lateral zips which provide a comfortable accessing of the vehicle while coveredWith rear zips providing access to the rear part of the vehicle while being coveredComplete with storage bagColour: light/dark grey

As an effective addition to thermal covers and curtains, these mats insulate the footwell beneath the dashboard as well as the floor space between driver's and passengers seat against cold getting in and heat getting out.

Developed specifically for the H3 high rear door dimensions of Fiat Ducato from 07/2006 on. Consisting of 2 parts with inner velour coating. Is attached via magnets to doors inside the vehicle. When the doors are closed, both parts overlap in the centre to create an efficient heat insulation in the sleeping area.

Neues, speziell für die Verkleidung von Freizeitfahrzeugen entwickeltes Thermomaterial, das sich aufgrund seiner weichen Konsistenz perfekt an die Konturen der Kabinenkarosserie anschmiegt.Eigenschaften:- Hochwertiges Polyester-Material- Speichert keine Feuchtigkeit- Beständig gegen Temperaturen bis zu -35°C- Schützt vor Kälte und Hitze- Oberteil kann separat angebracht werden (ohne Unterteil)- Obere Platte kann heruntergeklappt/geöffnet werden, um Licht hereinzulassen- Abdeckung bis zum Boden- UV-stabil- Gewichtsreduzierung- Abdeckungen können auch bei sehr kalter Witterung gerollt oder gefaltet werden- Einfacher Einbau

Three-piece thermal cover set for motorhomes for insulation, darkening and noise protection. Consists of a large cover for the windscreen as well as 2 smaller covers for the driver's and the passenger's side. The 6-layered material contains insulating layers made of polyester wool and Aircap bubble wrap. The inside is grey, the exterior is made of a reflective aluminium foil. With eyelets and suction cups, the individual covers are quickly and easily attached to the insides of the windows. Delivery includes a storage bag.

Precisely manufactured, two-part external insulation cover that keeps the heat inside, making it the ideal thermal insulation for winter holidays and helping to save heating costs. It consists of a separately available upper and lower part. The upper section insulates the area of the front and side windows, while the lower section covers the non-insulated engine compartment, wheel arches and footwell. The thermal cover is creating extensive external insulation for the entire cab and significantly increases living comfort on winter holidays. The integrated wind baffle protects against draughts underneath the cab. The outer surfaces of the lightweight, approx. 20 mm thick insulation (lower section approx. 10 mm) are made of weatherproof and strong PE fabric, while the polyester inner insulation does not retain moisture.The material is winterproof and can be rolled up or folded even in very cold conditions.The upper section is simply attached by hanging the pockets in the slightly open doors and fastened using the rubber tensioners provided. The lower section has an integrated Velcro strip along the upper side, which serves as a connecting element to the upper section, so that both parts form a two-part thermal mat. The front of the window mat can be opened and fitted with a separate screen insert to provide privacy from the outside. Can be used all year round.

Detachable protection against sun and prying eyes, but an uninterrupted view to the outside. 

Made of winter resistant tarpaulin with sewn-on textile grip-strip. All versions are made in two parts and have a Velcro fastener. Height 85 cm, weight about 430 g/m².

Made of winter resistant tarpaulin with sewn-on textile grip-strip. Theversions Fendt and tandem are made of two parts and have a Velcro fastener. Height 85 cm, weight about 430 g/m².

Universally fitting protective cover, made of SFS-3 tarpaulin material, which is particularly breathable and water-repellent, thus preventing condensation and mould growth. Delivery includes a storage bag, guy ropes and adhesive repair strips. Available for caravans, motorhomes and vans.

Three-piece thermal cover set for motorhomes for insulation, darkening and noise protection. Consists of a large cover for the windscreen as well as 2 smaller covers for the driver's and the passenger's side. The 6-layered material contains insulating layers made of polyester wool and Aircap bubble wrap. The inside is grey, the exterior is made of a reflective aluminium foil. With eyelets and suction cups, the individual covers are quickly and easily attached to the insides of the windows. Delivery includes a storage bag.

Three-piece thermal cover set for motorhomes for insulation, darkening and noise protection. Consists of a large cover for the windscreen as well as 2 smaller covers for the driver's and the passenger's side. The 6-layered material contains insulating layers made of polyester wool and Aircap bubble wrap. The inside is grey, the exterior is made of a reflective aluminium foil. With eyelets and suction cups, the individual covers are quickly and easily attached to the insides of the windows. Delivery includes a storage bag.

Made of winter resistant tarpaulin with sewn-on textile grip-strip. The tandem versions are made in two parts and have a Velcro fastener. Height 85 cm, weight about 430 g/m².

Thermal material specially developed for covering leisure vehicles. Thanks to its soft structure, it adapts perfectly to the windscreen contours and the side windows of the cabin. Features: High-quality polyester material Does not retain moisture Resistant to temperatures down to -35 °C Protects against cold and heat Cover panel can be folded down/opened to let in light UV-stable Cover can also be rolled or folded in very cold weather

To seal the gap between the vehicle and the floor. This way, it protects against draught and cold, e.g. in the Thule Residence G3.

Universally fitting roof protection tarp for motorhomes, made of high-quality SFS-3 tarpaulin material with a weight of approx. 160 g/m². The 3-layered material is especially breathing and water-repellent to prevent the formation of condensation and mold. Delivery includes transportation bag, guy ropes and a repair set.

Neues, speziell für die Verkleidung von Freizeitfahrzeugen entwickeltes Thermomaterial, das sich aufgrund seiner weichen Konsistenz perfekt an die Konturen der Kabinenkarosserie anschmiegt.Eigenschaften:- Hochwertiges Polyester-Material- Speichert keine Feuchtigkeit- Beständig gegen Temperaturen bis zu -35°C- Schützt vor Kälte und Hitze- Oberteil kann separat angebracht werden (ohne Unterteil)- Obere Platte kann heruntergeklappt/geöffnet werden, um Licht hereinzulassen- Abdeckung bis zum Boden- UV-stabil- Gewichtsreduzierung- Abdeckungen können auch bei sehr kalter Witterung gerollt oder gefaltet werden- Einfacher Einbau

Detachable protection against sun and prying eyes, but an uninterrupted view to the outside. 

Insulation against cold in winter, protection against sunlight in summer. The mats are slipped clipped to the door edges (without screwing or drilling) and anchored with rubber straps (included). The door edges are flexible to better fit over installed darkening systems. Four Seasons are made of weather-proof thermal foil with double-sided, vaporized UV stabilised polyester foil. The front can be opened easily.

Innovative tent ground skirt, made of 50 cm high PVC-tarp. With its robust and waterproof sewn-in storage bag it utilises unused room underneath the caravan and generates additional storage space. Thus coolness under the vehicle can be used for hygienic storing of food or beverages or other things like toys or shoes. A dual zip closes the bag draught-proof and allows comfortable access. To avoid condensation, the bag is outfitted with anti insect mesh to care for permanent air circulation. Thanks to the welded-on grip strip, the skirt can be easily shortened from both ends. It can be combined with any standard skirt floor or vehicle specific wheel case cover. Dimensions bag about: W 80 x H 35 x D 35 cm.

Made of winter resistant tarpaulin with sewn-on textile grip-strip. The tandem versions are made in two parts and have a Velcro fastener. Height 85 cm, weight about 430 g/m².