For compensating frame edges. For Mover XT, SX, smart.
Content: 2 Stck (€51.98* / 1 Stck)
€103.95*
Mandatory for reinforcing frames of caravans with a frame thickness of less than 2.8 mm! For Mover XT, SX, smart.
Content: 2 Stck (€57.00* / 1 Stck)
€114.00*
Set of 2 clamping plates for chassis with a U-profile frame.
Content: 2 Stck (€26.45* / 1 Stck)
€52.90*
Tragfähigkeit: 2000 kg
Obligatory for Dyonic chassis with < 2.8 mm frame thickness.
€93.95*
Maße Höhe: 30 mm
For compensating the frame height. Content: 2 sets.
€124.00*
Set of 2 adapter kits for Hymer Eriba Troll models with a square tube frame and L-profile.
Content: 2 Stck (€59.95* / 1 Stck)
€119.90*
Installation kit to complement the rectangular profile. For installation on a chassis with rectangular profile. For Mover XT, SX, smart.
Content: 2 Stck (€112.48* / 1 Stck)
€224.95*
For compensating frame edges. For Mover XT, SX, smart. Up to 1800 kg.
Content: 2 Stck (€54.98* / 1 Stck)
€109.95*
Tragfähigkeit: 1500 kg
Obligatory for Dyonic chassis with < 2.8 mm frame thickness.
€93.95*
For compensating a frame height of less than 80 mm (Mover XT, XT2, XT4) or 110 mm (Mover SX, smart). The kit consists of mounting plates (each 240 mm high) with screws and nuts.
Content: 2 Stck (€74.50* / 1 Stck)
€149.00*
For AL-KO with continuous frame and a maximum permissible weight of 1900 – 2000 kg. Used for compensating frame edges. For Mover XT, SX, smart.
Content: 2 Stck (€54.98* / 1 Stck)
€109.95*
For compensating heights lower than 80 mm (Mover XT, XT2, XT4) or 110 mm (Mover SX, smart). Consists of mounting plates (each 170 mm high) incl. screws and nuts.
Content: 2 Stck (€74.50* / 1 Stck)
€149.00*
For displacing the AL-KO spare wheel carrier backwards by 90 cm.
Content: 2 Stck (€112.50* / 1 Stck)
€225.00*