The X-RVC290MK2 rear view camera was specially designed for Fiat Ducato vehicles built from 2006/07 onwards and vehicles of the same design. For best possible view behind the motorhome, this rear view camera offers a horizontal viewing angle of 125°. Its special feature is physical integration of the camera into the third brake light of Ducato vehicles. The X-RVC290MK2 is compatible with a wide range of moniceivers and navigation systems as well as infotainers from the XZENT series.

The high-quality image display of these cameras ensure, supported by IR illumination, which also provides a perfect night vision, easy and stress-free manoeuvring. The twin cameras make it possible to look behind the vehicle while driving and, while manoeuvring, to monitor the area directly behind the motorhome. The cameras are suitable for navigation systems and moniceiver with RCA camera inputs.

4 systems with two display sizes (5” or 7”) and a black or white camera, whose integrated heating as well as IF-illumination and night-vision function provide perfect vision in every weather or lighting condition. With the camera microphones, acoustic instructions can be transferred from the back to the driver and played via the loudspeakers integrated into the display.

Whether you drive a camper, a caravan or a van, you are supposed to always feel comfortable and safe. PerfectView cameras keep an eye on everything surrounding the vehicle. The cameras reliably delivery clear images – at day as well as by night, on cold winter days or in the bright summer sun. Thanks to its highly compact dimensions and low assembly form, the PerfectView cameras adapt perfectly to modern vehicle forms. The temperature-controlled heater ensures the best image quality also at low temperatures. Watertight housing ensure that rain and splash water leave the high-quality cameras unharmed. The cameras are suitable for all navigation systems with a connection for an external camera (cinch). Freely adjustable ball camera, stored in a stable aluminium die-cast housing. It can also be used as a lateral camera and is equipped with 5 LEDs for an improved night vision.

Camera designed for the installation below the vehicle ground, with whose help it is easy to find the right position for the disposal. With this camera, you can see the outlets and steer your motorhome directly over the ground inlet. The robust steel casing protects the camera and integrated infrared illumination provides good sight even in darkness. The underbody camera can be connected effortlessly to the AV-input of a moniceiver or navigation system.

The cameras integrated into the Camos backup video sets (technical data: see page 902) are also available individually. Supported by IR illumination, the high-quality image display of the cameras even at night-time provides perfect vision and thus, easy and hassle-free manoeuvring. The Twin cameras enable rear vision while driving and direct vision rear the vehicle upon manoeuvring. The cameras are compatible with navigation systems, moniceiver and already installed displays. Included in delivery are 18 m (13 m with the CM-5180M HD) connection cable from the camera to the display and an adapter to connect it to cinch inputs.

The very compact CM-5180M HD camera is an excellent all-rounder: due to software-protected, digital image processing, the camera offers- similar to a twin camera- 2 pictures at the same time- just with one lens. While driving forwards, the view straight back is activated to monitor the backward travel (view angle 95°), engaging into reverse, the camera changes to a broader view (140°), monitoring the direct back of the vehicle. This way, even manoeuvring is child's play .

Innovative camera solution specially developed for the Fiat Ducato van built since 2006/07 (X250 and X290). The CAM 35 2.0 model with wide-angle lens offers a particularly wide viewing angle when manoeuvring and is integrated into a body-mounted brake light console. The original brake light is still used. The console also offers the option of mounting a second optional camera (CAM 35 2.0 FS) with a 60° telephoto lens for a distant view to the rear while driving. The TWIN model of the CAM 35 2.0 is supplied with both cameras integrated. The vehicle-specific design of the bracket ensures a perfect fit and easy installation – without additional holes in the bodywork. The camera housing is sealed watertight with a silicone seal, making additional sealing unnecessary. It can be painted in the vehicle color for the perfect look.

Reversing Video Systems CamosThe range of reversing video systems by Camos consists of 4 cameras and 3 monitors. The compact HD cameras CM-200M HD and CM-5180M HD are situated in an aluminium housing; for the standard camera CM-48 and the twin camera CM-49, you have the choice between a black and a white metal housing. All housings are certified to IP69K (CM-5180M HD to IP68) and are protected against splash water. The monitors included in the sets are available in the sizes 4.3", 5" and 7". Camera input on all monitors can be activated manually or automatically, e.g. while reversing. Moreover, they can be operated at 12 and 24 volts and can therefore also be used in trucks.With the compact 4.3" TFT monitor and the two high-quality colour cameras, these entry-level models offer excellent image quality. Infrared LEDs and a heater ensure perfect vision in darkness and cold. In addition to the automatic white balance, a microphone rounds off the equipment of the cameras.

System with 6 compact digital sensors (ø 18 mm), which can be varnished in vehicle colour, ideally suitable for especially high or wide vehicles. With the measurement it considers also attachments to the bodywork, as for example bike carriers or towbars. If a bike carrier is attached, the system can be switched manually between 2 stop zones, depending on whether the carrier is folded in or out. The system warns acoustically within a detection range of approx. 3 m of obstacles, sensitivity is adjustable in 3 steps.6 digital sensors offer 3 assembly variations: 6 x bumper4 x bumper and 2 x top rear4 x bumper and 2 x sides

The compact and robust camera impresses with its outstanding image quality and is suitable for a wide range of applications. The space-saving housing enables easy installation, even in confined spaces. High-quality image sensors guarantee optimum images, even in poor lighting conditions. The extremely robust housing is compact and durable. The CS123LA is suitable for Kenwood devices with HD-TVI camera input (catalogue page 893).

Compact rear view camera with mostly closed housing for nearly invisible cable duct. The particularly bright image sensor with infrared LED support for perfect night vision provides high-quality images. The camera, waterproof and dust-tight according to IP 69K, is embedded in a robust aluminium housing with a stainless steel bracket.

Camera equipped with 2 separate camera modules. The 140° wide-angle lens shows the close range and the 50° telephoto lens provides long-range vision. Additionally equipped with a motorised camera cover and distance marks in reversing mode.

HD wide-angle cameras with a viewing angle of 150°, which are optimally matched to the installation position, offer outstanding image quality in HD resolution. Suitable for compatible moniceivers and navigation systems with HD-TVI camera input. They are simply integrated into a bracket for the third brake light included in the scope of delivery and mounted between the body and the brake light. The existing brake light continues to be used. A seal on the body side prevents the ingress of moisture.The Safety CS116BLA model (item no. 82 683) includes a 15 m long connection cable, suitable for moniceivers and navigation devices with cinch camera input.

The small shutter camera shows more than others: Its wide vision angle of 145° even catches peripheral obstacles. The motorised cover protects the lens against dirt and damage while driving. Separately organised LEDs provide glare-free night vision.

The set includes the CM-49 dual camera, optionally with a black or white housing, and a 5‘ or 7’ monitor. Thanks to the two camera lenses, you can switch between looking straight back and looking directly behind the vehicle. This means you can either watch the traffic behind you when driving forwards or see possible obstacles behind the vehicle when manoeuvring. The heating integrated in the camera as well as the infrared lighting and night vision function ensure a clear view even in bad weather or at night.

Reversing Video Systems CamosThe range of reversing video systems by Camos consists of 4 cameras and 3 monitors. The compact HD cameras CM-200M HD and CM-5180M HD are situated in an aluminium housing; for the standard camera CM-48 and the twin camera CM-49, you have the choice between a black and a white metal housing. All housings are certified to IP69K (CM-5180M HD to IP68) and are protected against splash water. The monitors included in the sets are available in the sizes 4.3", 5" and 7". Camera input on all monitors can be activated manually or automatically, e.g. while reversing. Moreover, they can be operated at 12 and 24 volts and can therefore also be used in trucks.With the compact 4.3" TFT monitor and the two high-quality colour cameras, these entry-level models offer excellent image quality. Infrared LEDs and a heater ensure perfect vision in darkness and cold. In addition to the automatic white balance, a microphone rounds off the equipment of the cameras.

Reversing Video Systems CamosThe range of reversing video systems by Camos consists of 4 cameras and 3 monitors. The compact HD cameras CM-200M HD and CM-5180M HD are situated in an aluminium housing; for the standard camera CM-48 and the twin camera CM-49, you have the choice between a black and a white metal housing. All housings are certified to IP69K (CM-5180M HD to IP68) and are protected against splash water. The monitors included in the sets are available in the sizes 4.3", 5" and 7". Camera input on all monitors can be activated manually or automatically, e.g. while reversing. Moreover, they can be operated at 12 and 24 volts and can therefore also be used in trucks.With the compact 4.3" TFT monitor and the two high-quality colour cameras, these entry-level models offer excellent image quality. Infrared LEDs and a heater ensure perfect vision in darkness and cold. In addition to the automatic white balance, a microphone rounds off the equipment of the cameras.

4 systems with two display sizes (5” or 7”) and a black or white camera, whose integrated heating as well as IF-illumination and night-vision function provide perfect vision in every weather or lighting condition. With the camera microphones, acoustic instructions can be transferred from the back to the driver and played via the loudspeakers integrated into the display.

The tried-and-tested components of the Dometic reversing video range can be ordered separately. The two LCD monitors are equipped with AHD technology for even clearer images and can be combined with the compact colour cameras as required. This creates systems that fulfil every (comfort) requirement. LCD monitors with state-of-the-art AHD technology, which ensures first-class image reproduction. Large, easily accessible illuminated pushbuttons make operation very convenient. The monitors are designed for an operating voltage of 11 to 30 volts and have 3 camera inputs. They have a day/night image function with individually adjustable image parameters and selectable normal or mirror image function. There is a choice of 2 sizes: 5‘ and 7’.

Parking aid available as front (F294) and rear version (R294). The 4 extra flat mini ultrasonic sensors detect every obstacle in front or back of the vehicle. The small sensors with a diameter of only 22 mm are very easy to install by clip-mounting. Thanks to its very slim retaining ring (only 0.75 mm thick) the sensors, varnished in the colour of the vehicle, blend perfectly into the bumper. Training the parking aid is not necessary. Adjustment of the settings (sensivity and volume) is possible.Features:Monitors an area of approx. 100 cm in front and respectively 160 cm behind the vehicleManual activation (F294 only) and when one goes into reverse; Automatical deactivation of the front sensors after 10 seconds inactivityR294: activation when one goes into reverse

Wide-angle cameras with a viewing angle of 150° that are perfectly matched to the installation position. They are simply integrated into a bracket for the third brake light included in the scope of delivery and mounted between the body and the brake light. The existing stop light is still used. A seal on the body side prevents the ingress of moisture.The Safety CS120BLA (item no. 82 647) and Safety CS116BLA (item no. 82 683) models include a 15 m long connection cable, suitable for moniceivers and navigation devices with cinch camera input.The Safety CS116 models offer outstanding picture quality in HD resolution. They are suitable for Kenwood devices with HD-TVI camera input (catalogue page 893).

To observe the following traffic while driving and the area behind the vehicle when manoeuvring. Suitable for connection to navigation systems and moniceivers with multiple camera inputs.

Turning manoeuvres can quickly become complicated, especially when space is limited. With its 4 cameras mounted on the sides of the vehicle, the 360° all-round system provides a perfect overview of the entire vehicle. The bird's eye view in combination with a realistic 3D view of your vehicle ensures that you no longer overlook any obstacles and can park very easily. With the option of integrating up to 4 additional cameras into the view modes, manoeuvring becomes even easier, e.g. with an underfloor camera for the waste water tank or a roof camera for the clearance height.In the variant without a monitor, the image signal is transmitted to an existing monitor or a navigation system; the variant including a monitor is supplied with a 10.1’ LCD monitor.Scope of delivery:4 cameras, control module, remote controlFeatures:360° all-around vision around the vehiclesafe manoeuvring with large vehiclescameras with solid aluminium housingdifferent camera views: front, side, back, mirror or full view in 2D and 3Dreversing view activated by going into reverse, side view upon activating the corresponding turn signalfree selection of the views via keyboard (direct selection of the mirror view requires an external switch which is not included in delivery)Technical data control unit:Voltage 12 – 24 Volt, power intake < 5 mA, output voltage for cameras 5 V, power supply with cameras max. 19 Watt, video input HD 1280 x 720 pixels, video output 1280 x 720 pixels/ 720 x 480 pixels, camera selection by keyboard, going into reverse, turn signal or extra signal, operating temperature -30 – +75 °C, dimensions W 21.6 x H 2.54 x D 13.4 cm.Technical data cameras: Voltage 5 Volt, power consumption< 220 mA, image sensor ¼” Sony ISX016, viewing angle horizontally 190,5° ± 3° vertically 119.1° ± 3°, resolution 1280 x 720 pixels, image frequency 30 fps, light sensitivity 1 Lux, protection class IP69K, operating temperature -30 – +75 °C, dimensions W 6.1 x H 4.2 x D 5 cm. Technical data 10.1“ monitor: Screen diagonal 10.1“, resolution 1280 x 800 pixels,  brightness level 400 cd/m², voltage 12 – 48 V, operating temperature -20 – +70 °C, dimensions W 25.7 x H 17.8 x T 3.7 cm, weight 1.14 kg.

The CAM 440 dual vision camera combines near and far vision in one compact module. It enables clear images when reversing and while driving, without changing gear. The views can be easily switched using the optional switch. The spherical camera (36 mm diameter) offers concealed cable routing, modern sensor technology for the best night vision and selectable formats for high-resolution images on AHD and CVBS monitors. The integrated wiring harness enables the connection of a second camera (CAM 440 E) for monitoring the rear, side or interior. Dust-protected and compatible with all monitors, it is perfect for hidden areas such as bike racks or the interior.

The cameras integrated into the Camos backup video sets (technical data: see page 902) are also available individually. Supported by IR illumination, the high-quality image display of the cameras even at night-time provides perfect vision and thus, easy and hassle-free manoeuvring. The Twin cameras enable rear vision while driving and direct vision rear the vehicle upon manoeuvring. The cameras are compatible with navigation systems, moniceiver and already installed displays. Included in delivery are 18 m (13 m with the CM-5180M HD) connection cable from the camera to the display and an adapter to connect it to cinch inputs.

The cameras integrated into the Camos backup video sets (technical data: see page 902) are also available individually. Supported by IR illumination, the high-quality image display of the cameras even at night-time provides perfect vision and thus, easy and hassle-free manoeuvring. The Twin cameras enable rear vision while driving and direct vision rear the vehicle upon manoeuvring. The cameras are compatible with navigation systems, moniceiver and already installed displays. Included in delivery are 18 m (13 m with the CM-5180M HD) connection cable from the camera to the display and an adapter to connect it to cinch inputs.

Turning manoeuvres can quickly become complicated, especially when space is limited. With its 4 cameras mounted on the sides of the vehicle, the 360° all-round system provides a perfect overview of the entire vehicle. The bird's eye view in combination with a realistic 3D view of your vehicle ensures that you no longer overlook any obstacles and can park very easily. With the option of integrating up to 4 additional cameras into the view modes, manoeuvring becomes even easier, e.g. with an underfloor camera for the waste water tank or a roof camera for the clearance height.In the variant without a monitor, the image signal is transmitted to an existing monitor or a navigation system; the variant including a monitor is supplied with a 10.1’ LCD monitor.Scope of delivery:4 cameras, control module, remote controlFeatures:360° all-around vision around the vehiclesafe manoeuvring with large vehiclescameras with solid aluminium housingdifferent camera views: front, side, back, mirror or full view in 2D and 3Dreversing view activated by going into reverse, side view upon activating the corresponding turn signalfree selection of the views via keyboard (direct selection of the mirror view requires an external switch which is not included in delivery)Technical data control unit:Voltage 12 – 24 Volt, power intake < 5 mA, output voltage for cameras 5 V, power supply with cameras max. 19 Watt, video input HD 1280 x 720 pixels, video output 1280 x 720 pixels/ 720 x 480 pixels, camera selection by keyboard, going into reverse, turn signal or extra signal, operating temperature -30 – +75 °C, dimensions W 21.6 x H 2.54 x D 13.4 cm.Technical data cameras: Voltage 5 Volt, power consumption< 220 mA, image sensor ¼” Sony ISX016, viewing angle horizontally 190,5° ± 3° vertically 119.1° ± 3°, resolution 1280 x 720 pixels, image frequency 30 fps, light sensitivity 1 Lux, protection class IP69K, operating temperature -30 – +75 °C, dimensions W 6.1 x H 4.2 x D 5 cm. Technical data 10.1“ monitor: Screen diagonal 10.1“, resolution 1280 x 800 pixels,  brightness level 400 cd/m², voltage 12 – 48 V, operating temperature -20 – +70 °C, dimensions W 25.7 x H 17.8 x T 3.7 cm, weight 1.14 kg.

The very compact CM-5180M HD camera is an excellent all-rounder: due to software-protected, digital image processing, the camera offers- similar to a twin camera- 2 pictures at the same time- just with one lens. While driving forwards, the view straight back is activated to monitor the backward travel (view angle 95°), engaging into reverse, the camera changes to a broader view (140°), monitoring the direct back of the vehicle. This way, even manoeuvring is child's play .

The XZENT X-RVC45 back-up camera has been specially developed for semi- and fully-integrated motorhomes. It offers a horizontal field of view of 100°. It is optimised for very good vision to the rear at an installation height of approx. 2.5 m. It is compatible with a wide range of 2-DIN A/V devices as well as 2-DIN infotainers and vehicle-specific naviceivers from XZENT.

The compact and robust camera persuades with an excellent image quality and is suitable for versatile application. The space-saving housing enables an easy installation, even within limited space. The cover for the screws ensure an appealing look. High-quality image sensors ensure perfect pictures, even in adverse lighting conditions. The extremely robust casing is compact and resistant.

The cameras integrated into the Camos backup video sets (technical data: see page 902) are also available individually. Supported by IR illumination, the high-quality image display of the cameras even at night-time provides perfect vision and thus, easy and hassle-free manoeuvring. The Twin cameras enable rear vision while driving and direct vision rear the vehicle upon manoeuvring. The cameras are compatible with navigation systems, moniceiver and already installed displays. Included in delivery are 18 m (13 m with the CM-5180M HD) connection cable from the camera to the display and an adapter to connect it to cinch inputs.

Innovative camera solution specially developed for the Fiat Ducato van built since 2006/07 (X250 and X290). The CAM 35 2.0 model with wide-angle lens offers a particularly wide viewing angle when manoeuvring and is integrated into a body-mounted brake light console. The original brake light is still used. The console also offers the option of mounting a second optional camera (CAM 35 2.0 FS) with a 60° telephoto lens for a distant view to the rear while driving. The TWIN model of the CAM 35 2.0 is supplied with both cameras integrated. The vehicle-specific design of the bracket ensures a perfect fit and easy installation – without additional holes in the bodywork. The camera housing is sealed watertight with a silicone seal, making additional sealing unnecessary. It can be painted in the vehicle color for the perfect look.

The high-quality image display of this camera guarantees easy and stress-free manoeuvring thanks to the support of the IR lighting (except SA102LA.03), providing perfect visibility even at night. The twin camera allows rear viewing while driving and monitoring the area right behind the motorhome while manoeuvring. The cameras are suitable for navigation systems and moniceivers with RCA camera inputs.

The very compact CM-5180M HD camera is an excellent all-rounder: due to software-protected, digital image processing, the camera offers- similar to a twin camera- 2 pictures at the same time- just with one lens. While driving forwards, the view straight back is activated to monitor the backward travel (view angle 95°), engaging into reverse, the camera changes to a broader view (140°), monitoring the direct back of the vehicle. This way, even manoeuvring is child's play .

Compact rear view camera with mostly closed housing for nearly invisible cable duct. The particularly bright image sensor with infrared LED support for perfect night vision provides high-quality images. The camera, waterproof and dust-tight according to IP 69K, is embedded in a robust aluminium housing with a stainless steel bracket.

The cameras integrated into the Camos backup video sets (technical data: see page 902) are also available individually. Supported by IR illumination, the high-quality image display of the cameras even at night-time provides perfect vision and thus, easy and hassle-free manoeuvring. The Twin cameras enable rear vision while driving and direct vision rear the vehicle upon manoeuvring. The cameras are compatible with navigation systems, moniceiver and already installed displays. Included in delivery are 18 m (13 m with the CM-5180M HD) connection cable from the camera to the display and an adapter to connect it to cinch inputs.

Compact rear view cameraTransmission range of up to 15 mHD resolution and 160° wide field of visionPower supply of the camera via the back light (activation upon going into reverse), or alternatively with a constant power supply (activation upon pressing a button)Incl. plate holderFor long trailer, an extension cable (length 15 m) is available upon special orderFor Camper 795Dimensions camera: W 2.5 x H 2.18 x D 1.7 cmWeight: 37.4 g

Small shutter camera, perfect for installation at high or inaccessible spots. It provides an extra-wide angle of 120 ° and perfect night vision thanks to an active IR LED illumination. The camera lens is protected by a motor-operated cover. The robust housing is equipped with an integrated microphone and a temperature-controlled heater.

Compact rear view camera with mostly closed housing for nearly invisible cable duct. The particularly bright image sensor with infrared LED support for perfect night vision provides high-quality images. The camera, waterproof and dust-tight according to IP 69K, is embedded in a robust aluminium housing with a stainless steel bracket.

Wide-angle cameras with a viewing angle of 150° that are perfectly matched to the installation position. They are simply integrated into a bracket for the third brake light included in the scope of delivery and mounted between the body and the brake light. The existing stop light is still used. A seal on the body side prevents the ingress of moisture.The Safety CS120BLA (item no. 82 647) and Safety CS116BLA (item no. 82 683) models include a 15 m long connection cable, suitable for moniceivers and navigation devices with cinch camera input.The Safety CS116 models offer outstanding picture quality in HD resolution. They are suitable for Kenwood devices with HD-TVI camera input (catalogue page 893).

Camera equipped with 2 separate camera lenses: a 140° wide-angle lens (close-up vision) and a 50° telephoto lens (distance vision). IR-LEDs provide excellent night vision and the motorised camera cover protects the lenses while driving. In reversing mode, 3 distance marks provide additional safety. Via the microphone, acoustic instructions via the monitor-internal loudspeaker can be emitted.

The set includes the CM-49 dual camera, optionally with a black or white housing, and a 5‘ or 7’ monitor. Thanks to the two camera lenses, you can switch between looking straight back and looking directly behind the vehicle. This means you can either watch the traffic behind you when driving forwards or see possible obstacles behind the vehicle when manoeuvring. The heating integrated in the camera as well as the infrared lighting and night vision function ensure a clear view even in bad weather or at night.

Can be connected as a second camera to the CAM 440 to monitor critical areas at the rear, on the side or in the vehicle interior.

Parking aid available as front (F294) and rear version (R294). The 4 extra flat mini ultrasonic sensors detect every obstacle in front or back of the vehicle. The small sensors with a diameter of only 22 mm are very easy to install by clip-mounting. Thanks to its very slim retaining ring (only 0.75 mm thick) the sensors, varnished in the colour of the vehicle, blend perfectly into the bumper. Training the parking aid is not necessary. Adjustment of the settings (sensivity and volume) is possible.Features:Monitors an area of approx. 100 cm in front and respectively 160 cm behind the vehicleManual activation (F294 only) and when one goes into reverse; Automatical deactivation of the front sensors after 10 seconds inactivityR294: activation when one goes into reverse

Compact rear view camera with mostly closed housing for nearly invisible cable duct. The particularly bright image sensor with infrared LED support for perfect night vision provides high-quality images. The camera, waterproof and dust-tight according to IP 69K, is embedded in a robust aluminium housing with a stainless steel bracket.

Wide-angle cameras with a viewing angle of 150° that are perfectly matched to the installation position. They are simply integrated into a bracket for the third brake light included in the scope of delivery and mounted between the body and the brake light. The existing stop light is still used. A seal on the body side prevents the ingress of moisture.The Safety CS120BLA (item no. 82 647) and Safety CS116BLA (item no. 82 683) models include a 15 m long connection cable, suitable for moniceivers and navigation devices with cinch camera input.The Safety CS116 models offer outstanding picture quality in HD resolution. They are suitable for Kenwood devices with HD-TVI camera input (catalogue page 893).

Whether you drive a camper, a caravan or a van, you are supposed to always feel comfortable and safe. PerfectView cameras keep an eye on everything surrounding the vehicle. The cameras reliably delivery clear images – at day as well as by night, on cold winter days or in the bright summer sun. Thanks to its highly compact dimensions and low assembly form, the PerfectView cameras adapt perfectly to modern vehicle forms. The temperature-controlled heater ensures the best image quality also at low temperatures. Watertight housing ensure that rain and splash water leave the high-quality cameras unharmed. The cameras are suitable for all navigation systems with a connection for an external camera (cinch). Freely adjustable ball camera, stored in a stable aluminium die-cast housing. It can also be used as a lateral camera and is equipped with 5 LEDs for an improved night vision.