Available for Ducato H3 (in connection with Ladder Deluxe DJ Ducato H3). For vehicle lengths up to 6.36 m (L3 and L4). It is mounted on the original points. Incl. 4 Fixing Bar Rails as standard. The awning is attached on the right-hand side (in driving direction) with the supplied adapters. Kit Roof Rail Ducato Extra is available for additional load support.

Thanks to the innovative Smart Clamp system, this roof rack is very easy to install. Crossbars for the load can be positioned flexibly on the 2 aluminium longitudinal rails to optimally adjust it to the motorhome's roof construction. The maximum load capacity is 75 kg with 2 mounted crossbars or 150 kg when 4 carriers are used. The system is compatible to an awning Thule Omnistor 6200 mounted earlier than 2017 by means of a conversion kit (item no. 89 212). The comprehensive accessory range includes e.g. rooftop boxes and carriers for kayaks and skis (see catalogue page 217). Suitable for Fiat Ducato built since 2006/07 with H2 roof and vehicles identical in construction.Set consists of 2 rails, is required when you do not want to install an awning at the same time; can be expanded later on with the awning retrofit kit (item no. 89 215 or 89 216).

2 pieces, made of anodised aluminium, length 2.5 m, effortlessly to cut.

For mounting on the Roof Rack longitudinal rails. Set consists of 2 rails of 1.5 m length each. To bridge any existing roof bonnets and roof superstructures, 2 different heights are available. Load capacity 75 kg.

Peugeot Boxer 250, Citroën Jumper 250, Fiat Ducato X250, short wheelbase 2006 – 2014, Opel Movano C, 2021 – ...Interior dimensions 2.93 x 1.60 mWithout planks, awning adapter and crossbar.Peugeot Boxer 250, Citroën Jumper 250, Fiat Ducato X250, long wheelbase 2006 – 2014, Opel Movano C, 2021 – ...Interior dimensions 3.53 x 1.60 mWithout planks, awning adapter and crossbar.To attach a Thule series 6000 awning incl. adapter, the width of the rail must be shortened (item no.: 136/714 and item no.: 136/715).

Flexible roof carrier solution for the Fiat Ducato built since 2006/07 with H2 roof, rail length 1.64 m, load capacity 100 kg. It has been designed for campervans where roof superstructures, such as skylights or refrigerator ventilation prevent the installation of continuous longitudinal rails. The installation is done without drilling onto 4 fixating points of the vehicle and a full-surface adhesion, whereas the roof in the area of the longitudinal rails has to be free of obstacles 10 cm to the inside. The system is compatible to an awning Thule Omnistor 6300 in the length 3.25, 3.75 or 4 m. The awning has to be installed to the adapter 90 628 (3.25 m) or 90 629 (3.75/4 m). It can also be used without awning, e.g. to install crossbars or brackets for sports equipment (see page 217).

Crossbar (2 pieces) for the EuroCarry roof rail Adventure Roof.

The sturdy walkable plank is mounted onto the EuroCarry rail (crossbar).Features: anti-slip aluminium channelled sheet, 8 slot nuts M6, 8 screws M6 x 10

The roof rail with oval profiles, 3 m in length. Can easily be cut to the desired length. Ends and stilts are covered by plastic end caps. Max. load capacity 70 kg.

Lockable roof rack made of anodised aluminium for transport of all kinds of skis and snowboards. Suitable for installation on the Thule Roof Rack System and for most standard carriers. The support surfaces (width 25 or 50 cm) of the carrier are equipped with extremely soft rubber pads, which give best grip without causing scratches on the skis or boards. The vertical spring system allows the transport of even thicker boards. 2 sets of support feet are included in delivery to carry also skis with bigger ski bindings. A very big push button allows to open and close the rack even with gloves on.

Sturdy and reinforced rail with a double base. Pre-drilled for easy attachment to the Carry-Bike. Not suitable for e-bikes.

The robust walkable plank is attached to the EuroCarry roof rail (crossbar).

Lockable roof rack made of anodised aluminium for transport of all kinds of skis and snowboards. Suitable for installation on the Thule Roof Rack System and for most standard carriers. The support surfaces (width 25 or 50 cm) of the carrier are equipped with extremely soft rubber pads, which give best grip without causing scratches on the skis or boards. The vertical spring system allows the transport of even thicker boards. 2 sets of support feet are included in delivery to carry also skis with bigger ski bindings. A very big push button allows to open and close the rack even with gloves on.

Luggage carrier system for Fiat Ducato from 2006 on. Either for long or short wheelbase (can be shortened). For vehicle lengths up to 6 m. Inner dimension: 136.6 cm.

The robust walkable plank is attached to the EuroCarry roof rail (crossbar).

To retrofit a roof awning Thule Omnistor 6200 / 6300 (see caalogue page 142) to an already existing Roof Rack System Standard (e.g. Adria Van Supreme). The kit includes a special adapter set, connectors and two sealing tapes made of EPDM (length 2 m).

The robust walkable plank is attached to the EuroCarry roof rail (crossbar).

Peugeot Boxer 250, Citroën Jumper 250, Fiat Ducato X250, short wheelbase 2006 – 2014, Opel Movano C, 2021 – ...Interior dimensions 2.93 x 1.60 mWithout planks, awning adapter and crossbar.Peugeot Boxer 250, Citroën Jumper 250, Fiat Ducato X250, long wheelbase 2006 – 2014, Opel Movano C, 2021 – ...Interior dimensions 3.53 x 1.60 mWithout planks, awning adapter and crossbar.To attach a Thule series 6000 awning incl. adapter, the width of the rail must be shortened (item no.: 136/714 and item no.: 136/715).

Give your vehicle a sporty appearance with the aerodynamic shape of the roof rail Style. Simple installationAerodynamic shapeNo drilling required on the roofThe rail is attached to the existing standard mounting points of the vehicle roof. The end pieces are glued to the roof with Sikaflex (not included). Any number of EuroCarry crossbars can be attached. It is possible to mount a Fiamma F45 awning or Omnistor Series 5 (steep face awning) and Fiamma F45.Distributed load: 200 kg distributed on 4 crossbars.Features: High-quality anodised aluminium construction, silver, powder-coated. The roof rail can be painted in the vehicle colour.vehicle length 6363 mm

Canoe holder that is easy to load and suitable both for the Thule Roof Rack system and for most of the standard roof carriers. Its robust holders with round-shaped sides and weather-proof padding protect the canoe while driving. Strong tension straps are equipped with a buckle protection to avoid scratches on canoe and vehicle. Suitable for 1 canoe, max. additional load 45 kg.

Crossbar (2 pieces) for the EuroCarry roof rail Adventure Roof.

Adapter set to mount the awning series 5 (roll out awning).

Luggage carrier system for Fiat Ducato from 2006 on. Either for long or short wheelbase (can be shortened). For vehicle lengths up to 6 m. Inner dimension: 136.6 cm.

Roof rail, ideal for attachment to caravans or motorhomes. End pieces made of die-cast aluminium and aluminium tube (can be shortened) on which the Fixing Bar Rails are mounted.

Crossbar (2 pieces) for the EuroCarry roof rail Adventure Roof.

Support bars made of anodised aluminium. In combination with the Roof Rail, you can transform it into a roof rail without having to drill holes into the vehicle. Can be shortened. Scope of delivery: 2 support bars (L: 245 cm), each with two mounting blocks and rubber spacers.

Simple assembly. No drilling at the roof. The rail is attached to the existing standard mounting points of the vehicle roof. The support legs of the roof rail on the right in driving direction are also mounting points for an Omnistor series 6 awning.Features: aluminium rack, anodised, 2 x 3 support legs, 3 cover caps in black and 4 crossbars.Installation option for Omnistor series 6 awnings. No additional adapters necessary!The load capacity of 200 kg is distributed over 4 crossbars.Attention: The max. roof load must not be exceeded!Not compatible with Fiamma awnings!

The roof rail with oval profiles, 3 m in length. Can easily be cut to the desired length. Ends and stilts are covered by plastic end caps. Max. load capacity 70 kg.

Roller for easy loading. Simplifies loading a canoe, kayak or other items onto the vehicle from the rear. Easy to combine with Roof Rail Ducato, Roof Rail Ducato Maxi XL and all commercially available roof racks, except those with round profiles. Not suitable for vehicles with reversing camera.

The extension of the EuroCarry rail allows you to attach the rail 67011 to Fiat Ducato, Citroën Jumper and Peugeot Boxer from model year 06/2006 on with a vehicle length of 636 cm.

To retrofit a roof awning Thule Omnistor 6200 / 6300 (see caalogue page 142) to an already existing Roof Rack System Standard (e.g. Adria Van Supreme). The kit includes a special adapter set, connectors and two sealing tapes made of EPDM (length 2 m).

The Kit Roof Rail Ducato Extra brackets are available for load-bearing support.

To install onto the Ford Transit and VW California. Set consists of 2 rail with a length of 1.5 m each.

To install onto the Ford Transit. Set consists of 2 rail with a length of 1.5 m each.

Instead of the Smart Clamps for the passengers side, this set includes a kit for simultaneous mounting of a roof awning Thule Omnistor 6200 / 6300 with Ducato package (see catalogue page 160).

Two zinc-coated steel parts, approx. 60 mm higher.

Give your vehicle a sporty appearance with the aerodynamic shape of the roof rail Style. Simple installationAerodynamic shapeNo drilling required on the roofThe rail is attached to the existing standard mounting points of the vehicle roof. The end pieces are glued to the roof with Sikaflex (not included). Any number of EuroCarry crossbars can be attached. It is possible to mount a Fiamma F45 awning or Omnistor Series 5 (steep face awning) and Fiamma F45.Distributed load: 200 kg distributed on 4 crossbars.Features: High-quality anodised aluminium construction, silver, powder-coated. The roof rail can be painted in the vehicle colour.vehicle length 5416 mm

The crossbar for the Euro Carry roof rail STYLE can be positioned anywhere thanks to the special double groove stone, which is previously inserted into the rail. Several EuroCarry crossbars create a complete truss system on the roof. The standard groove (width: 25 mm) of the crossbar itself is suitable for installing support systems such as surfboard racks, solar panels, ... Features: 2 piece anodised aluminium profiles with mounting material (length: 148 cm)

Peugeot Boxer 250, Citroën Jumper 250, Fiat Ducato X250, short wheelbase 2006 – 2014, Opel Movano C, 2021 – ...Interior dimensions 2.93 x 1.60 mWithout planks, awning adapter and crossbar.Peugeot Boxer 250, Citroën Jumper 250, Fiat Ducato X250, long wheelbase 2006 – 2014, Opel Movano C, 2021 – ...Interior dimensions 3.53 x 1.60 mWithout planks, awning adapter and crossbar.To attach a Thule series 6000 awning incl. adapter, the width of the rail must be shortened (item no.: 136/714 and item no.: 136/715).

For retrofitting the roof rack system with awning pack to the already existing roof awning Thule Omnistor 6200 / 6300 (year of construction of the adapter built before 2017).

The robust walkable plank is attached to the EuroCarry roof rail (crossbar).

For models built since 06/2006. For vehicle lengths up to 6.36 m.

Give your vehicle a sporty appearance with the aerodynamic shape of the roof rail Style. Simple installationAerodynamic shapeNo drilling required on the roofThe rail is attached to the existing standard mounting points of the vehicle roof. The end pieces are glued to the roof with Sikaflex (not included). Any number of EuroCarry crossbars can be attached. It is possible to mount a Fiamma F45 awning or Omnistor Series 5 (steep face awning) and Fiamma F45.Distributed load: 200 kg distributed on 4 crossbars.Features: High-quality anodised aluminium construction, silver, powder-coated. The roof rail can be painted in the vehicle colour.vehicle length 5998 mm

Kayak holder to mount on the Roof Rack system (requires longitudinal and high cross bars), made of aluminium and double coated steel. Due to its lift assistance it enables a very comfortable handling to kayaks by only one person. Double foldable, plastic coated arms lower the loading height for up to 1 m, thus kayaks can be loaded and unloaded very comfortably. Thereby gas pressure springs reduce the weight of the kayak up to 18 kg when lifting or lowering. It offers room for 1 kayak with a maximum width of 80 cm and a maximum weight of 35 kg. Two Hullavator Pro can be installed onto one vehicle.

Instead of the Smart Clamps for the passengers side, this set includes a kit for simultaneous mounting of a roof awning Thule Omnistor 6200 / 6300 with Ducato package (see catalogue page 160).

Peugeot Boxer 250, Citroën Jumper 250, Fiat Ducato X250, short wheelbase 2006 – 2014, Opel Movano C, 2021 – ...Interior dimensions 2.93 x 1.60 mWithout planks, awning adapter and crossbar.Peugeot Boxer 250, Citroën Jumper 250, Fiat Ducato X250, long wheelbase 2006 – 2014, Opel Movano C, 2021 – ...Interior dimensions 3.53 x 1.60 mWithout planks, awning adapter and crossbar.To attach a Thule series 6000 awning incl. adapter, the width of the rail must be shortened (item no.: 136/714 and item no.: 136/715).

Instead of the Smart Clamps for the passengers side, this set includes a kit for simultaneous mounting of a roof awning Thule Omnistor 6200 / 6300 with Ducato package (see catalogue page 160).