Incl. 10 mm shim. Hole distance caravan wall 6 cm, door 4.25 cm.

Mortise latch lock with M-LOCK. Follower: 8 mm. Backset: 50 mm. Magnetic lock.

One-piece locking device with spring support. Holds back service doors.

Self-cutting countersunk screw with cross recess.

The screw-on magnetic fittings can be used either frontally or laterally depending on the design. They can be securely and stably mounted with two screws. The wide versions with two elongated holes each allow for precise adjustment of the position.The screw-on magnetic fittings impress with a housing made of powder-coated metal, which ensures both a high-quality appearance and high strength. With a construction height of only 10 mm, the system is particularly flat and discreet. A powerful neodymium magnet guarantees reliable holding force* (25 N/2.5 kg). The rubberised contact surface protects against scratches and ensures a pleasant, quiet closing sound. In summary: robust, high-quality and aesthetically pleasing.* The forces were determined at room temperature on a polished steel plate (S235JR according to DIN 10 025) with a thickness of 10 mm (1 kg ~ 10 N). A deviation of up to -10% from the specified value is possible in exceptional cases. Generally, the value is exceeded. The type of application (installation situation, temperatures, counter-anchors, etc.) can significantly influence the forces. The specified values are for guidance.

Rubber pad for profile rails, edge and awning rails, incl. sealant..

This high-quality magnetic door stop with rubber buffer reliably holds doors and hatches open. The rubberised magnetic system dampens impacts well and protects against scratches. Attach the stop to the back of a door or directly to the wall and ensure a suitable counterpart. With an overall length of 65 mm and a hole distance of 50 mm, this door stop is the ideal solution.NdFeB, 2 x drill holes ø 5 mm, hole distance 50 mm, rubberised including damping, holding force*: 60 N/6 kg* The forces were determined at room temperature on a polished steel plate (S235JR according to DIN 10 025) with a thickness of 10 mm (1 kg ~ 10 N). A deviation of up to -10% from the specified value is possible in exceptional cases. Generally, the value is exceeded. The type of application (installation situation, temperatures, counter-anchors, etc.) can significantly influence the forces. The specified values are for guidance.

Filler strip with a width of 12 mm. Available in different colours and lengths.

The door holder for recreational vehicles is extremely flexible and adapts effortlessly to different door hinges. Wall distance 30 mm; door distance 45 mm.

Gas compression spring for flaps. With 10 mm eyes on both sides on 8 mm thread ends.

Backset 15 mm, can be used on the left or right.

Short arm hinge for thin swing doors from 14 mm door thickness. Caravan hinge opening angle 95°, drilling pattern: 38/7.5 mm, without automatic closing mechanism.

For caravan hatches.

For connecting two furniture parts. With eight holes, supplied with cover plate.

Available in 4 different colours.

Pressure lock for caravan hatches and doors.

Door connecting bolt for barn door effect for caravan and motorhome doors. The wall distance refers to the door thickness.

P fitting, fibreglass-reinforced.

For connecting two furniture parts. With eight holes, supplied with cover plate.

Filler strip with a width of 12 mm. Available in different colours and lengths.

Furniture bridge handle without screws. Hole distance: 160 mm

Closure and counterpart in white. The door opens automatically when you press on the door surface. The door can also be locked by applying light pressure against the door surface.

These magnetic systems are suitable for flush installation in the piece of furniture. They are fixed in place using wood screws in the drilled hole. Strong neodymium magnets ensure optimal adhesion, while the included rubber cap protects the magnet core from impacts. The systems are supplied with the appropriate counterpart. The included rubber cap dampens sounds and makes the fitting look good when installed.The assembly set consists of:Magnet2 x disc2 x screwRubber cap

with piping rail without groove

The rear grip latch is ideally suited for applications where doors or hatches protrude beyond the frame. Thanks to its thoughtful design, it can be easily installed on doors or hatches whose length exceeds the frame height.

Connection piping in grey. Awning attachment to the vehicle. Made of plastic. Hooked in the gutter on one side. On the other side, the profile piping of the canvas awning or tent is pulled in.

Rubber pad for profile rails, edge and awning rails, incl. sealant..

Door connecting bolt for barn door effect for caravan and motorhome doors. The wall distance refers to the door thickness.

Magnetic lock, holding force 5.0 kg, attached via screws, flat design

Aluminium rail for piping rail. Can be used e.g. as a canopy rail, an awning rail, or to attach storm flaps to the underside of the vehicle. With piping rail and groove. Price per piece. Length 5 m.

Available in 4 different colours.

Filler strip dark brown/black with a width of 12.5 mm. Available in different lengths.

With 4 screw holes, hole spacing: 172 mm. Two-part design.

The furniture connector consists of 2 parts.

for wood thickness 16 mm; ø 3.5 cm.

Filler strip uni blue with a width of 15.4 mm. Available in different lengths.

Lift-up fixing for standard applications with handle, for single hatches made of wood or with aluminium frame (19 – 21 mm or from a width of 45 mm). Fixing for screwing with pre-assembled Euro screw, front tool-free, with front mounting for sliding onto the lever arm. Adjustment options: height, side, tilt, holding force Opening angle: 90° or 107° Scope of delivery: Set of lift-up fixings (1 each left/right) 2 front mounting plates with pre-assembled screws Installation instructions incl. paper drilling template for the side wall

Profile pole

Magnetic lock, holding force 5.0 kg, attached via screws, flat design

Set of 2, suitable for the standard steps integrated into the bumper of Fiat Ducato from year of construction 2014/05 and other vehicles identical in construction. The aluminium plate makes it easier to reach the windscreen for cleaning, because the corrugated surface prevents slipping off the step tread when its wet and slippery. The plates are securely installed with 4 glue dots and 2 screws.

With rosette for Push-Lock Mini, for wood thickness 16 mm.

The magnetic door holder is designed for installation in doors or for attachment to the door. When installed, it disappears into the door.

Aluminium rail with groove for filler strip. Length 5 m. Price per piece.

Open: by applying light pressure on the door, a spring mechanism is triggered, allowing the door to open slightly. Close: push the door all the way until it stops, so that the spring mechanism is tensioned and the door locks.

Screw-on lock with rotating rod cutouts (usable on the left- and right-hand side), 3-point locking device, variable length as the rotary rods can be reduced in size.

Door connecting bolt for barn door effect for caravan and motorhome doors. The wall distance refers to the door thickness.

Support profile E 335 for trim rail. Available in different lengths.

With 4 screw holes, hole spacing: 148 x 18 mm.