Solid brackets for attachment in the rear garage. The Garage-Bars consist of 2 aluminium rails which are fixed to the wall. Included in delivery: 10 Eyes (sliding eyelets), mounting screws and cover caps.

Bike carrier for 2 bikes, extendable to a maximum of 4 bikes, is installed in the motorhome‘s garage. The platform is fixated at 4 points to the floor. The carrier can be folded up while not in use.

SmartRail presents the smartest solution for transporting scooters in the rear garage of your motorhome. The scooter is pushed over the hand-placed loading rail in the front wheel recession Fixation of the scooter on the carriage of the rail system by means of a handlebar tensioning belt Pulled inside via the wired remote control and the toothed belt with the electric version Suitable for front wheel sizes of between 8” and 16”Space-saving construction Electric version: power provision 12 V, power consumption: 7.5 A Dimensions: L 190 x W 28 x H 6 cm Load capacity: up to 150 kg Weight: approx. 10 kg, electric version: 12 kg Scope of Delivery: Platform with the carriage, wired remote control (electrical version only), loading rail, handlebars tensioning belt, 2 rear tensioning belts. Linnepe Rack Systems For excursion trips, scooters are getting more and more popular because they do not require an additional driving license- and transportation possibilities are available, if the live weight allows it, for nearly every motorhome. Basically, a scooter can be transported inside the spacious rear garage or at the rear of the motorhome at a load rack. As in both cases, restrictions concerning the motorhome’s remaining loading capacity have to be adhered to, the Linnepe rack systems are made of seawater-resistant aluminium. At the same time, they provide the same (if not more) stability as standard steel racks – in combination with the significant weight reduction. All rack systems mounted to the outside are connected to the chassis and not the body. They are detachable without tools and are delivered with an EG type certification, thus, they do not need to be registered in the vehicle’s registration papers. Additional costs for a frame extension additionally required for vehicles without or with a non-carrying frame extension: 429.00 €. Please tell us the exact vehicle and vehicle’s body data (exact vehicle type, chassis, year of construction) upon ordering!The 13-pin wiring kit is required to connect the rear load carriers and has to be ordered separately. Your order arrives directly from Linnepe!

The Carry Moto System for caravans and motorhomes with a rear garage. Consists of a motorbike rail (L 180 cm x W 14 cm) and a drive-on rail (L 180 cm), which are connected to each other when loading to prevent slipping. Made of sturdy zinc-coated aluminium. Supplied with 2 sturdy straps to fix the motorbike while travelling.

Thule VeloSlide is a bike carrier that is without equal when it comes to user friendliness and vehicle integration. What makes this patented rear garage bike carrier unique is its operation. The basic rack in the centre is easy to pull out by hand and has a maximum load capacity of 70 kg. A bicycle or e-bike can be placed on both ends. After the basic rack has been horizontally pulled out of the rear garage up to 1.5 m, the rotationally adjustable and fixable convex wheel intakes can be adapted to the specific wheel dimensions, so that the bikes can be comfortably put up. Robust tightening handles and bike holders secure the bikes on the carrier. Pulling back the basic carrier into the rear garage can be done in steps to store additional luggage in between. For installing the carrier on the floor of the rear garage, a mounting rail set (89 497 or 89 498) is recommended. While not in use, the carrier can be pulled out or aside to save space. Weight: approx. 20 kg.

SmartRail presents the smartest solution for transporting scooters in the rear garage of your motorhome. The scooter is pushed over the hand-placed loading rail in the front wheel recession Fixation of the scooter on the carriage of the rail system by means of a handlebar tensioning belt Pulled inside via the wired remote control and the toothed belt with the electric version Suitable for front wheel sizes of between 8” and 16”Space-saving construction Electric version: power provision 12 V, power consumption: 7.5 A Dimensions: L 190 x W 28 x H 6 cm Load capacity: up to 150 kg Weight: approx. 10 kg, electric version: 12 kg Scope of Delivery: Platform with the carriage, wired remote control (electrical version only), loading rail, handlebars tensioning belt, 2 rear tensioning belts. Linnepe Rack Systems For excursion trips, scooters are getting more and more popular because they do not require an additional driving license- and transportation possibilities are available, if the live weight allows it, for nearly every motorhome. Basically, a scooter can be transported inside the spacious rear garage or at the rear of the motorhome at a load rack. As in both cases, restrictions concerning the motorhome’s remaining loading capacity have to be adhered to, the Linnepe rack systems are made of seawater-resistant aluminium. At the same time, they provide the same (if not more) stability as standard steel racks – in combination with the significant weight reduction. All rack systems mounted to the outside are connected to the chassis and not the body. They are detachable without tools and are delivered with an EG type certification, thus, they do not need to be registered in the vehicle’s registration papers. Additional costs for a frame extension additionally required for vehicles without or with a non-carrying frame extension: 429.00 €. Please tell us the exact vehicle and vehicle’s body data (exact vehicle type, chassis, year of construction) upon ordering!The 13-pin wiring kit is required to connect the rear load carriers and has to be ordered separately. Your order arrives directly from Linnepe!