Filter pads for gas filters.

The Truma G.7 high-pressure hose with SBS increases the safety of gas systems, fulfils legal standards and stops the flow of gas in the event of damage. Designed for use in the UK and Ireland, it supports safety when travelling and at the place of use.

For maximum security on the road and at the campsite, Truma offers high-pressure hoses equipped with hose rupture protection (SBS). They meet all legal requirements for running gas systems while driving but are also suitable for stationary use. If the hose is damaged, the protection is triggered and stops the gas flow.

At a temperature of 0 °C, tiny droplets of ice or propane hydrate can form in the regulator due to traces of water in liquid gas. This reduces or stops the gas supply.The regulator heater EisEx prevents the formation of ice droplets with electrical heating. EisEx ensures trouble-free gas supply even in winter.

For installation when space is limited. AG M 20 x 1.5 x M 20 x 1.5 swivel nut.

Truma flat gasket G.13

DuoC, the remote display for the DuoControl CS from 2019 on, indicates inside the vehicle which gas cylinder is in operation. The EisEx prevents the system from freezing at low temperatures.Scope of delivery: control panel, cable harness 6 m, transmitter 1.5 m, integrated EisEx

Gas pressure regulator with crash sensor for one gas cylinder, wall or ceiling installation.

When you plug in the transmitter, you can connect a remote indicator DuoC (up to 04/2019) to a Truma DuoControl CS gas regulator from 04/2019 onwards.

Screw aid SW 23/KF for Truma gas supply.

Housing for exterior gas socket.

Gas pressure regulator with crash sensor for gas tanks This safety gas pressure regulator can be directly connected to the outlet valve of a gas tank and has several advantages: Easily identify and reset triggered crash sensor Lightweight Quick installation possible For safe mobile and stationary operation

Truma gas pressure regulators are characterised by their particularly compact and lightweight design. The crash sensor (CS) has been optimised: if the regulator has been triggered, this is indicated by the yellow button. The Truma CS gas pressure regulators can be used both when stationary and when travelling. Reliable: operate gas appliances safely even when travelling – thanks to the integrated crash sensor. Convenient: easily recognise and reset a triggered crash sensor. Practical: indicates which cylinder is in operation and therefore full or empty (DuoControl CS). Lightweight: low weight. Technical data: gas type: liquid gas (propane/butane); inlet pressure: 0.7 – 16 bar; outlet pressure: 30 mbar; regulator output: 1.5 kg/h; regulator inlet: external thread M 20 x 1.5 (G.13); regulator outlet: cutting ring fitting 10 mm or 8 mm (H.9).

The feet are original Truma spare parts. Please check the manufacturer’s part number.

The Truma G.2 high-pressure hose guarantees a high level of safety thanks to the hose rupture protection and fulfils all legal requirements for mobile and stationary use of gas systems in France and Switzerland.

For use with DuoControl (CS) or DuoComfort at a gas cylinder distance of more than 100 cm.

Extension cable Ultraheat for control panel.

The Truma G.10 high-pressure hose with SBS ensures a high level of safety in mobile and stationary gas systems, fulfils legal requirements for operation while driving and immediately interrupts the gas flow in the event of damage. It was developed for Sweden, Norway, Iceland and Portugal and ensures safe travelling.

Filter element for the Truma gas control system to ensure a secure gas supply.

The coupling pad is an original Truma spare part. Please check the manufacturer’s part number.

The control panel is an original Truma spare part. Please check the manufacturer’s part number.

Truma flat gasket G.1

Spare cartridge for the silver Truma gas filter up to 2018.

Spare part for control panel CP plus, Combi D 6 (E) (05/08 – ...), Combi 4 (E), Combi 6 (E) (06/18 – ...) and Vario Heat eco and comfort (01/17 – ...).

Truma flat gasket G.2

Truma flat gasket G.10

Truma gas pressure regulators are characterised by their particularly compact and lightweight design. The crash sensor (CS) has been optimised: if the regulator has been triggered, this is indicated by the yellow button. The Truma CS gas pressure regulators can be used both when stationary and when travelling. Reliable: operate gas appliances safely even when travelling – thanks to the integrated crash sensor. Convenient: easily recognise and reset a triggered crash sensor. Practical: indicates which cylinder is in operation and therefore full or empty (DuoControl CS). Lightweight: low weight. Technical data: gas type: liquid gas (propane/butane); inlet pressure: 0.7 – 16 bar; outlet pressure: 30 mbar; regulator output: 1.5 kg/h; regulator inlet: external thread M 20 x 1.5 (G.13); regulator outlet: cutting ring fitting 10 mm or 8 mm (H.9).

Mounting bracket for gas filter.

The battery cover is an original Truma spare part. Please check the manufacturer’s part number.

The Truma gas filter effectively protects your gas system against soiling: oily residues are reliably filtered out and collected in a filter pad. Simply replace the filter pad with a new one each time you change the bottle. The gas filter fits all wall- or ceiling-mounted Truma gas pressure regulators.Filters up to 99.9% of aerosols and protects the gas system and all gas devices.Together with the pads, you can use the filter for longer and save money.Can be opened quickly and without tools to control and replace the pad.Opening is only possible when the gas cylinder is closed.Fits into nearly all gas cylinder boxes.Quick to retrofit.Input: exterior thread M20 x 1.5 (G.13)Output: union nut M20 x 1.5 (H.20)

The G.8 high-pressure hose with hose rupture protection (SBS) fulfils the legal requirements for operating the gas system while driving. In the event of damage, the gas flow is automatically interrupted. Suitable for the countries GB, IE, ES, BE, NL, DK, NO, HR, CZ, SI, SK and HU.

The remote indicator is an original Truma spare part. Please check the manufacturer’s part number.

Spare part control panel Truma electric boiler (05/04 – 12/14)

Blind cover complete for Truma gas supply.

Protective cap for the test connection of the MonoControl and DuoControl

The Truma high-pressure hose G.1 offers a safe gas supply when travelling and when stationary thanks to the hose rupture protection (SBS). It fulfils the legal requirements for operation while driving and is suitable for use in Italy, Malta, Cyprus, Greece and Turkey.

For leak testing of liquid gas devices in vehicles.

The coupling is an original Truma spare part. Please check the manufacturer’s part number.

Clamping plate for attaching the LevelControl to aluminium cylinders, as they are not magnetic.

The transmitter is an original Truma spare part. Please check the manufacturer’s part number.

The control panel cable is an original Truma spare part. Please check the manufacturer’s part number.

Valve with flange and pipe for exterior gas socket.

The Truma gas filter effectively protects your gas system against soiling: oily residues are reliably filtered out and collected in a filter pad. Simply replace the filter pad with a new one each time you change the bottle. The gas filter fits all wall- or ceiling-mounted Truma gas pressure regulators.Filters up to 99.9% of aerosols and protects the gas system and all gas devices.Together with the pads, you can use the filter for longer and save money.Can be opened quickly and without tools to control and replace the pad.Opening is only possible when the gas cylinder is closed.Fits into nearly all gas cylinder boxes.Quick to retrofit.Input: exterior thread M20 x 1.5 (G.13)Output: union nut M20 x 1.5 (H.20)