Self-Priming Pressure Pump

Special drain/suction pump for: Showers Sinks WashbasinsFresh/waste water tanks Specially for higher waste water tanks This solution collects shower and waste water and automatically pumps it into the waste water tank, even if the tank is at a higher level. The collection container holds up to 4 litres of liquid. Two dirt filters protect the pump from heavy contamination and malfunctions. The housing has several inlets (19/25 mm and 30/40 mm) for the use of various inlet hoses. A discharge outlet is provided, which can be used for multiple cross-sections (19/25 mm).  A vent connection and a provided cable feed-through ensure easy activation and reliable operation. Inlets: 19 mm, 19/25 mm, 30/40 mmOutlet: 19/25 mm

Ensures even water flow in automatic pressure pumps and prevents them from being switched on and off several times during low water withdrawal. Safety-approved for 5 bar overpressure at 60 °C according to TÜV-SW-005-93. With venting screw for draining the system and stable fastening straps on the housing.Dimensions: T-Connection ø 10/12.5 mm. Tank H 300 x W 90 mm; tank with brackets H 300 x W 100 mm; hole spacing 120 mm. Hose tail W 80 x H 38 mm.

Automatic drinking water pump with bypass control. High delivery rate with pulsation-free operation Very quiet due to four-chamber membrane technology and fully rubberised anti-vibration feet Flow rate up to 11.6 l/min With adjustable bypass control Adjustable pressure switch (presetting pressure switch: 2.4 bar, adjustable from 1.9 – 3.8 bar) Safe to run dry Self-priming up to a height of 4 m Materials suitable for drinking water Incl. stainless steel pre-filter strainer and hose connections Compatible with UV-C LED water disinfection and sterile filters by WM aquatec Technical data: Max. delivery rate: 11.6 l/min (open flow) Cut-off pressure: 2.4 bar (adjustable from 1.4 – 2.8 bar) Water connections: 12/13 mm hose nozzle (1 x straight, 1 x angled)

For automatic and reliable supply of drinking water in motorhomes. The unique diaphragm technology guarantees precise and controlled dosing. Each pump head has a check valve for over 13 bar and a pressure switch control. This ensures that water flows immediately when the tap is opened. All LILIE diaphragm pumps are dry self-priming and may also run dry.

For automatic and reliable supply of drinking water in motorhomes. The unique diaphragm technology guarantees precise and controlled dosing. Each pump head has a check valve for over 13 bar and a pressure switch control. This ensures that water flows immediately when the tap is opened. All LILIE diaphragm pumps are dry self-priming and may also run dry.

For automatic and reliable supply of drinking water in motorhomes. The unique diaphragm technology guarantees precise and controlled dosing. Each pump head has a check valve for over 13 bar and a pressure switch control. This ensures that water flows immediately when the tap is opened. All LILIE diaphragm pumps are dry self-priming and may also run dry.

For convenient water withdrawal. An air bubble with constant pressure is enclosed by a flexible membrane. The pressure of the air bubble is preset to 1.4 bar and can be changed using a bicycle pump. Optimum function when this value is close to the restart pressure of the pump. Mounting hole 105 mm.

Double diaphragm pressure pump for supplying several taps. Suitable for continuous operation with battery power through air cooling and with automatic pressure switch for 1.4 bar. The pump is suitable for hot water boilers and instantaneous water heaters. Hose connection ø 10/12 mm. Static head: 1.50 m.