With the front wall extension, the Privacy Room can be easily adapted to the correct awning size. First select a basic model to suit your awning. Then extend it to the desired length with a front wall extension.
A lightweight protective tent which, thanks to its tried-and-tested, patented design, can be set up particularly easily and quickly directly beneath the awning. The entire tent is made in one piece and requires no additional poles. For roof mounting, either an existing awning rail or an optional mounting kit is used; for wall mounting, an optional mounting kit is also required. The front section is secured in the awning’s channel rail. With its elegant, timeless design, the Thule QuickFit complements all awning colours and is fitted with integrated curtains on all windows. The arched canopy, tensioned by quick-fit fibreglass poles, provides additional shade over the large panoramic windows at the front, which can be opened fully. The side windows are fitted with fly screens. Access is possible from both the left and right sides of the front. The air layer created by the double roof between the awning and the tent provides good insulation to keep the tent cool. Made from robust ripstop polyester, a lightweight, waterproof fabric made from tear-resistant material used in aerospace engineering. Supplied complete with groundsheet, guy ropes and carry bag.
Just like the established Thule Residence, the Thule Panorama consists of a front panel and 2 side panels. It provides the same excellent stability and is as easy to pitch, also a partial installation is possible. The front panel is simply drawn into the lead rail of the awning and connected to the side panels, which are attached by a clamping profile to the awning fabric, via zipper. Thanks to the large panoramic windows, increased light incidence and a better view to the outside are provided. The front windows can be vertically opened as a door, or used horizontally for ventilation. All parts are completely detachable. A sufficient ventilation even in a closed tent is ensured thanks to the two ventilation striped integrated into the side panels. Moreover, both side windows are equipped with mosquito nets. The Thule Panorama is made of Airtex®, coated with acryl on one side and impregnated with a teflon-based finish. Thanks to the fungicide treatment, the water-repellent, washable material is effectively protected against fungal and mould infestation. Available in 3 heights, medium height is required for an installation height of 2.3 - 2.44 m (measured from the bottom edge of the awning cassette to the ground), large height for an installation height of 2.45 - 2.59 m and extra-large height for 2.6 - 2.74. Delivery includes 2 packing bags and mud flap.Front panel designDepending on the awning length, the design of the front panel varies without compromising on brightness or comfort. Wide front panels and slimmer spacers are combined. The large panoramic windows can be rolled up vertically and used as a door, or also removed entirely. Opened horizontally, they let some fresh air in.
Front Panel designThe design of the front panel varies depending on the awning's length without making a compromise in brightness or comfort. Larger and smaller front panels are combined. All front panels, even those with large panorama window, can completely be rolled up. The smaller front panels are used as entrance.
Just like the established Thule Residence, the Thule Panorama consists of a front panel and 2 side panels. It provides the same excellent stability and is as easy to pitch, also a partial installation is possible. The front panel is simply drawn into the lead rail of the awning and connected to the side panels which are attached to the awning fabric by means of a clamping profile and a zipper.. Thanks to the large panoramic windows, increased light incidence and a better view to the outside are provided. The front windows can be opened vertically as a door or horizontally for ventilation. All parts are completely detachable. Sufficient ventilation is ensured even in a closed tent thanks to the two ventilation strips integrated into the side panels.Moreover, both side windows are equipped with mosquito nets. The Thule Panorama is made of Airtex®, coated with acrylic on one side and impregnated with a Teflon-based finish. Thanks to the fungicide treatment, the water-repellent, washable material is effectively protected against fungal and mould infestation. Available in 3 heights, medium height is required for an installation height of 2.3 – 2.44 m (measured from the bottom edge of the awning cassette to the ground), large height for an installation height of 2.45 – 2.59 m and extra-large height for 2.6 – 2.74 m. Delivery includes 2 packing bags and mud flap.Front panel designDepending on the awning length, the design of the front panel varies without compromising on brightness or comfort. Wide front panels and slimmer spacers are combined. The large panoramic windows can be rolled up vertically and used as a door or also removed entirely. Opened horizontally, they let some fresh air in.
The approved awning tent Safari Residence presents the third generation with a new design. It consists of 2 single side panels and one front panel in neutral colour (RAL 9002). The window foils integrated in the side panels are equipped with mosquito nets and can be opened completely. The front panel (for lengths of more than 3.5 m) has a door on the left and on the right side and can be rolled up partly or completely. Thanks to the integrated fixation rail, the front can be combined very comfortably e.g. with a sun blocker. By means of a clamping profile the side panels are connected to the awning fabric. Front and sides are connected by a double piping profile – a strong and wind resistant connection. A height adjustable mast profile equipped with double rubber sealing, into which the side panels piping profile is slid in, is pressed to the vehicles side and perfectly seals this section. Additional stability is achieved by a diagonal support between the clamping and the mast profile. Thule Residence is available in 6 different heights (see table) for vehicles with straight sides. In case of an awning mounted straight above the vehicle's entrance, special side panels for combination with a higher front section with less roof pitch can be ordered via special order. All special orders have approx. 4 – 6 weeks delivery time. Delivery includes transport bags and vehicle apron.Mounting heightsHeight S 2.15 – 2.29 mHeight M 2.30 – 2.44 mHeight L 2.45 – 2.59 mHeight XL 2.60 – 2.74 mHeight XXL 2.75 – 2.89 mHeight 3XL 2.90 – 3.10 mFront panel designThe design of the front panel varies depending on the awnings length without making a compromise in brightness or comfort. Larger and smaller front panels are combined. All front panels, even those with large panorama window, can be rolled up completely. The smaller front panels are used as entrance.
With the front wall extension, the Privacy Room can be easily adapted to the right awning size. Select a basic model according to your awning. Add a front wall extension to extend your awning to the length you want.
The approved awning tent Safari Residence presents the third generation with a new design. It consists of 2 single side panels and one front panel in neutral colour (RAL 9002). The window foils integrated in the side panels are equipped with mosquito nets and can be opened completely. The front panel (for lengths of more than 3.5 m) has a door on the left and on the right side and can be rolled up partly or completely. Thanks to the integrated fixation rail, the front can be combined very comfortably e.g. with a sun blocker. By means of a clamping profile the side panels are connected to the awning fabric. Front and sides are connected by a double piping profile – a strong and wind resistant connection. A height adjustable mast profile equipped with double rubber sealing, into which the side panels piping profile is slid in, is pressed to the vehicles side and perfectly seals this section. Additional stability is achieved by a diagonal support between the clamping and the mast profile. Thule Residence is available in 6 different heights (see table) for vehicles with straight sides. In case of an awning mounted straight above the vehicle's entrance, special side panels for combination with a higher front section with less roof pitch can be ordered via special order. All special orders have approx. 4 – 6 weeks delivery time. Delivery includes transport bags and vehicle apron.Mounting heightsHeight S 2.15 – 2.29 mHeight M 2.30 – 2.44 mHeight L 2.45 – 2.59 mHeight XL 2.60 – 2.74 mHeight XXL 2.75 – 2.89 mHeight 3XL 2.90 – 3.10 mFront panel designThe design of the front panel varies depending on the awnings length without making a compromise in brightness or comfort. Larger and smaller front panels are combined. All front panels, even those with large panorama window, can be rolled up completely. The smaller front panels are used as entrance.
With the front wall extension, the Privacy Room can be easily adapted to the right awning size. Select a basic model according to your awning. Add a front wall extension to extend your awning to the length you want.
Just like the established Thule Residence, the Thule Panorama consists of a front panel and 2 side panels. It provides the same excellent stability and is as easy to pitch, also a partial installation is possible. The front panel is simply drawn into the lead rail of the awning and connected to the side panels, which are attached by a clamping profile to the awning fabric, via zipper. Thanks to the large panoramic windows, increased light incidence and a better view to the outside are provided. The front windows can be vertically opened as a door, or used horizontally for ventilation. All parts are completely detachable. A sufficient ventilation even in a closed tent is ensured thanks to the two ventilation striped integrated into the side panels. Moreover, both side windows are equipped with mosquito nets. The Thule Panorama is made of Airtex®, coated with acryl on one side and impregnated with a teflon-based finish. Thanks to the fungicide treatment, the water-repellent, washable material is effectively protected against fungal and mould infestation. Available in 3 heights, medium height is required for an installation height of 2.3 - 2.44 m (measured from the bottom edge of the awning cassette to the ground), large height for an installation height of 2.45 - 2.59 m and extra-large height for 2.6 - 2.74. Delivery includes 2 packing bags and mud flap.Front panel designDepending on the awning length, the design of the front panel varies without compromising on brightness or comfort. Wide front panels and slimmer spacers are combined. The large panoramic windows can be rolled up vertically and used as a door, or also removed entirely. Opened horizontally, they let some fresh air in.
Just like the established Thule Residence, the Thule Panorama consists of a front panel and 2 side panels. It provides the same excellent stability and is as easy to pitch, also a partial installation is possible. The front panel is simply drawn into the lead rail of the awning and connected to the side panels, which are attached by a clamping profile to the awning fabric, via zipper. Thanks to the large panoramic windows, increased light incidence and a better view to the outside are provided. The front windows can be vertically opened as a door, or used horizontally for ventilation. All parts are completely detachable. A sufficient ventilation even in a closed tent is ensured thanks to the two ventilation striped integrated into the side panels. Moreover, both side windows are equipped with mosquito nets. The Thule Panorama is made of Airtex®, coated with acryl on one side and impregnated with a Teflon-based finish. Thanks to the fungicide treatment, the water-repellent, washable material is effectively protected against fungal and mould infestation. Available in 3 heights, medium height is required for an installation height of 2.3 - 2.44 m (measured from the bottom edge of the awning cassette to the ground), large height for an installation height of 2.45 - 2.59 m and extra-large height for 2.6 - 2.74. Delivery includes 2 packing bags and mud flap.Front panel designDepending on the awning length, the design of the front panel varies without compromising on brightness or comfort. Wide front panels and slimmer spacers are combined. The large panoramic windows can be rolled up vertically and used as a door, or also removed entirely. Opened horizontally, they let some fresh air in.
The awning tent Modul Basic consists of 2 side panels and a front panel,
made of Airtex fabric. Innovative equipment features such as the
locking system of the roof and the pitching poles, the tinted foil of
the large panoramic windows with Air Vent function provide the travel
camper with a high level of comfort. The side panels are equipped with
an Air Vent window each, from size 7 on, the front panels are equipped
with an Air Vent window. All panels can be opened entirely, folded to
the veranda or detached. Both halves of the split front panel can be
opened or removed individually. Moreover, the door which is integrated
into the front panel can be attached to the left or the right. The
standard delivery includes a 15 cm high exterior and a 30 cm high
interior mud flap as well as covered zips.
Suitable for Dometic awnings PW 1000, PW 1500, PR 2000 and PR 2500 with a length from 3 – 4.5 m and a 2.5 m extensionExtremely fast and simple installation– only one person necessaryLow weightAs standard with mosquito net and roll-up PVC windowsSide panels available in 2 sizes: Medium (2.3 – 2.59 m) and large
(2.6 – 2.89 m) – measured from the bottom of the casing to the groundSpecial side panels for Fiat Ducato built since 07/2006Front panel fits both heights
Tent especially designed for the vehicle types Fiat Ducato with H2 roof and the Ford Transit with H3 roof, which consists of a side panel pair with 2.5 m extension, both in colour RAL 9002. Through a clamping profile, the side panels are firmly connected to the awning fabric. The front panels are delivered with the draught skirt, which is attached to the vehicle via snaps.
The approved awning tent Safari Residence presents the third generation with a new design. It consists of 2 single side panels and one front panel in a neutral colour (RAL 9002). The window foils integrated into the side panels are equipped with mosquito nets and can be opened completely. The front panel (for lengths of more than 3.5 m) has a door on the left and right side and can be rolled up partly or completely. Thanks to the integrated fixation rail, the front can be combined very such as a sun blocker. By means of a clamping profile the side panels are connected to the awning fabric. Front and sides are connected by a double piping profile – a strong and wind-resistant connection. A height-adjustable mast profile equipped with double rubber sealing, into which the side panels piping profile is slid in, is pressed to the vehicle’s side and perfectly seals this section. Additional stability is achieved by a diagonal support between the clamping and the mast profile. Thule Residence is available in 6 different heights (see table) for vehicles with straight sides. In case of an awning mounted straight above the vehicle‘s entrance, special side panels for combination with a higher front section with less roof pitch can be ordered via special order. All special orders have an approximate delivery time of 4 – 6 weeks. Delivery includes transport bags and vehicle apron.Front panel designThe design of the front panel varies depending on the awning’s length without making a compromise in brightness or comfort. Larger and smaller front panels are combined. All front panels, even those with large panoramic window, can be rolled up completely. The smaller front panels are used as an entrance.
The approved awning tent Safari Residence consists of 2 single side panels and one front panel in neutral colour (RAL 9002). The window foils integrated in the side panels are equipped with mosquito nets and can be opened completely. The front panel (length up from 3.5 m) has a door on the left and on the right side and can be rolled up partly or completely. Due to the integrated fixation rail the front can be combined very comfortably e. g. with a Sun Blocker (see p. 130). By means of a clamping profile, the side panels are connected to the awning fabric. Front and sides are connected by a double piping profile – a strong and wind resistant connection. A height adjustable mast profile equipped with double rubber sealing, into which the side panels piping profile is slid in, is pressed to the vehicles side and perfectly seals this section. Additional stability is achieved by a diagonal support between the clamping and the mast profile. Thule Residence G3 is available in 6 different heights (see table) for vehicles with straight sides. In case of an awning series 5003, 5200 and 8000 mounted straight above the vehicles entrance, particular side panels for combination with higher front section with less roof pitch can be ordered via special order. All special orders have approx. 4 – 6 weeks delivery time. Delivery includes transport bags and mud flap.
With the front wall extension, the Privacy Room can be easily adapted to the right awning size. Select a basic model according to your awning. Add a front wall extension to extend your awning to the length you want.
Side parts can be used separately for awning lengths of 260 – 600 cm
Door can be attached to the front wall either on the right or left
Roll-up crystal windows with mosquito net and curtains, can be closed with Velcro fasteners
Vinyl fabric: waterproof, UV-resistant, rot-proof and washable
Hermetic fastening through zips between the parts
Padding for additional protection of the side parts
Vertical Rafter (2 pcs.): aluminium, telescopic, blocks the padding (F80s for Ducato with magnets instead of Rafter)
Fast Clip: quick attachment of the side parts to the awning fabric with clamp fasteners
For VAN 260 or an awning length of 300 cm, no front panels are required.
Scope of delivery: 1 front part with roll-up window, mosquito net and door, which can be attached on either the right or the left side. Two side walls with roll-up windows and mosquito net, curtains for all windows, Fast Clip fastening system and carry bag Mega Bag.
Complete awning tent, all parts can be detached completely. The front is simply inserted into the roof awning’s front rail and firmly connected to the side walls and the awning cloth. Available for mounting heights from 2.3 to 2.5 m. Delivery includes 2 transportation bags and mud flap.
With the front wall extension, the Privacy Room can be easily adapted to the right awning size. Select a basic model according to your awning. Add a front wall extension to extend your awning to the length you want.
Shade provider, light and flexible in handmade quality. This lightness
has been realised in the Breeze series: Just the roof as real
‘all-rounder’ or with an additional front as wind protection. Roof and
front can be ordered separately and combined with a zip fastener. The
roof is mounted directly to the piping strip. The front can be added
individually with a zip. Ideal for anyone looking for more than just a
sun canopy.
Suitable for Dometic awnings PW 1100, PW 1500, and PR 2000 with lengths from 3 – 4.5 m and an extension of 2.5 mExtremely fast and simple mounting – only one person is necessaryLightweightAs standard with mosquito net and roll-up PVC windowsSide panels available in 2 sizes: Medium (2.3 – 2.59 m) and large (2.6 – 2.89 m) – measured from the bottom of the casing to the groundSpecial side panels for Fiat Ducato from 2006/07 (item no. 94 622)Front panel fits both heights
The approved awning tent Safari Residence consists of 2 single side panels and one front panel in neutral colour (RAL 9002). The window foils integrated in the side panels are equipped with mosquito nets and can be opened completely. The front panel (for lengths of more than 3.5 m) has a door on the left and on the right side and can be rolled up partly or completely. Thanks to the integrated fixation rail, the front can be combined very comfortably e.g. with a sun blocker. By means of a clamping profile the side panels are connected to the awning fabric. Front and sides are connected by a double Keder profile, creating a strong and wind-resistant connection. A height-adjustable mast profile equipped with double rubber sealing, into which the side panels Keder profile is slid in, is pressed to the vehicle‘s side and perfectly seals this section. Additional stability is provided by a diagonal support between the clamping and the mast profile. Thule Residence is available in 6 different heights (see table) for vehicles with straight sides. In case of an awning mounted straight above the vehicle's entrance, special side panels for combination with a higher front section with less roof pitch are available as a special order. All special orders have approx. 4 – 6 weeks of delivery time. Delivery includes 2 transportation bags and vehicle apron.Mounting heightHeight S 2.15 – 2.29 mHeight M 2.30 – 2.44 mHeight L 2.45 – 2.59 mHeight XL 2.60 – 2.74 mHeight XXL 2.75 – 2.89 mHeight 3XL 2.90 – 3.10 mFront panel designThe design of the front panel varies depending on the awnings length without making a compromise in brightness or comfort. Larger and smaller front panels are combined. All front panels, even those with large panorama window, can be rolled up completely. The smaller front panels are used as entrance.
With the front wall extension, the Privacy Room can be easily adapted to the right awning size. Select a basic model according to your awning. Add a front wall extension to extend your awning to the length you want.
Suitable for Dometic awnings PR 2000 and PR 2500 with a length from 3 – 4.5 m and a 2.5 m extensionExtremely fast and simple installation – only one person necessaryLow weightAs standard with mosquito net and roll-up PVC windowsSide panels available in 2 sizes: Medium (2.3 – 2.59 m) and large
(2.6 – 2.89 m) – measured from the bottom of the casing to the groundSpecial side panels for Fiat Ducato built since 07/2006Front panel fits both heights
Transform your Fiammastore into a cosy living space. The awning and the side walls can be connected quickly using the patented Fast Clip. The awning fabric is clamped between the lower and upper profiles and closed by means of clamps. The padding in the rear part of the side walls and is pressed against the awning by a telescopic aluminium rod. The front of the Privacy Room is pulled into the rail of the front wall and connected to the side walls via zips. The windows with mosquito nets can be opened and closed completely.The Privacy Room F80 is available in the following versions: Privacy Room 300 Ducato (and similar), Privacy Room 300 H3 (e.g. MB Sprinter and others), Privacy Room 300 H (e.g. caravan height 245 – 280 cm), Privacy Room 300 XL (awning extension 275 cm, height 245 – 280 cm) and Privacy Room 300 XXL (awning extension 275 cm, height 281 – 310 cm).Front wall: If your awning is 320 cm long or longer, you need the Privacy Room 300. In this case, you also need a front wall extension, the size of which depends on the length of your awning.Scope of delivery: front wall with roll-up window, mosquito net and door (can be attached on the right or on the left). Two side walls with roll-up windows and mosquito net. Curtains, Fast Clip fastening system, Mega Bag.
With the front wall extension, the Privacy Room can be easily adapted to the right awning size. Select a basic model according to your awning. Add a front wall extension to extend your awning to the length you want.
The compact and light privacy solution for the CaravanStore and the F35pro awning. Easy and quick to install. The side windows, which can be opened, are equipped with mosquito nets. The front wall with roll-up window and mosquito net is simply pulled into the piping rail of the roll and is easily connected to the side parts with zips.The Van version is specially designed for camper vans.The Privacy Room CS Light XL version is suitable for the CaravanStore XL awning with an extension of 250 cm.Front wall: If your awning is 360 cm long or longer, you need the Privacy Room CS Light XL 310. You then also need a front wall extension, the size of which depends on the length of your awning.Scope of delivery: 1 front wall with roll-up window, mosquito net and door, 2 side walls with window and mosquito net, 1 Fast Clip Light for quick and safe attachment to the awning, pegs and elastic tensioning straps, 1 transport bag.
Side panel pair with 2.5 m extension, specifically designed for the Fiat Ducato with H2 roof, colour RAL 9002. Through a clamping profile, the side panels are firmly connected to the awning fabric. The front panels are delivered with the draught skirt, which is attached to the vehicle via snaps.
With the front wall extension, the Privacy Room can be easily adapted to the right awning size. Select a basic model according to your awning. Add a front wall extension to extend your awning to the length you want.
With the front wall extension, the Privacy Room can be easily adapted to the right awning size. Select a basic model according to your awning. Add a front wall extension to extend your awning to the length you want.
Shade provider, light and flexible in handmade quality. This lightness
has been realised in the Breeze series: Just the roof as real
‘all-rounder’ or with an additional front as wind protection. Roof and
front can be ordered separately and combined with a zip fastener. The
roof is mounted directly to the piping strip. The front can be added
individually with a zip. Ideal for anyone looking for more than just a
sun canopy.
Side panel pair with 2.5 m extension, specifically designed for the Fiat Ducato with H2 roof, colour RAL 9002. Through a clamping profile, the side panels are firmly connected to the awning fabric. The front panels are delivered with the draught skirt, which is attached to the vehicle via snaps.
Awning tent of the 3rd generation, specially designed for the use in combination with the Thule Omnistor 5102 and the original T5 California awning. It consists of side panels and a front panel in the colour RAL 9002. The window foils integrated into the side panels are equipped with mosquito nets and can be opened completely. The front panel is equipped with an entrance door on the right side.
Suitable for installation on a Thule Omnistor 6200 / 6300 awning which, apart from the known features, comes with a front panel extending 50 cm outward,, creating a larger interior living area and a more spacious feel. Installation height 2.45 – 2.59 m.
With the front wall extension, the Privacy Room can be easily adapted to the right awning size. Select a basic model according to your awning. Add a front wall extension to extend your awning to the length you want.
The modular awning consists of a pair of side panels and a front panel and can be set up in no time. Be it the front panel or the side panels, all components can be either combined or used individually. The panels are made of Airtex fabric, the splashback and the mud flap of PVC. With the special Velcro strap, the wall elements are attached to the roll up awning. The tensioning poles supplied with the awning ensure a perfect fit. The large, integrated transparent film windows create a comfortable, light atmosphere. The door integrated into the front panel is equipped with a zip that be attached either to the left or the right. The windows of the side panels can be opened via their zips and rolled up. Firmly sewn-in mosquito nets allow you to let air in while keeping insects out. The panels universally fit awnings with an installation height of 215 cm to 250 cm. This results in a height of 170 cm to 200 cm. Delivery includes tensioning material.– Front and side panels have to be ordered separately! –
With the front wall extension, the Privacy Room can be easily adapted to the right awning size. Select a basic model according to your awning. Add a front wall extension to extend your awning to the length you want.
Light and compact for summer or transitional periods.
Front wall with roll-up crystal window, mosquito net and curtains
Roll-up door in the front wall
Side walls with roll-up blackout and mosquito net
Fast Clip CS: for quick and secure attachment of the awning fabric and side parts with clamp fasteners
Zip fasteners to hermetically connect the parts
Polyester fabric: lightweight, durable and washable
Kit Poles Light (2 pcs.): aluminium, telescopic, block the cushion (optional)
Rubber band for closing is attached to the awning and the ground to close the Privacy sides
If your awning is 360 cm long or longer, you need a front wall extension.Scope of delivery: front wall, side walls, Fast Clip CS, pegs and carry bag Bag Light (140 x 25 x 25 cm) for storing Privacy and poles
Shade provider, light and flexible in handmade quality. This lightness
has been realised in the Breeze series: Just the roof as real
‘all-rounder’ or with an additional front as wind protection. Roof and
front can be ordered separately and combined with a zip fastener. The
roof is mounted directly to the piping strip. The front can be added
individually with a zip. Ideal for anyone looking for more than just a
sun canopy.
With the front wall extension, the Privacy Room can be easily adapted to the right awning size. Select a basic model according to your awning. Add a front wall extension to extend your awning to the length you want.
Awning for F40van and F43van. Without poles, quick to set up and of interest to those who constantly travel from place to place.
Light, without poles
One-piece design: roof, front and side walls
Roll-up door
Front wall with crystal window and roll-up blackout
Side walls with roll-up blackout and mosquito net
Ripstop polyester fabric: very light, resistant to tears and damage
Front wall can be opened to extend the shaded area (optional with Kit Poles)
Attached directly to the housing box and the front wall of the awning
Compact – takes up little space
Scope of delivery: complete awning consisting of roof, front and side walls made from one continuous piece, transport bag Mega Bag
Light and compact for summer or transitional periods.
Front wall with roll-up crystal window, mosquito net and curtains
Roll-up door in the front wall
Side walls with roll-up blackout and mosquito net
Fast Clip CS: for quick and secure attachment of the awning fabric and side parts with clamp fasteners
Zip fasteners to hermetically connect the parts
Polyester fabric: lightweight, durable and washable
Kit Poles Light (2 pcs.): aluminium, telescopic, block the cushion (optional)
Rubber band for closing is attached to the awning and the ground to close the Privacy sides
Scope of delivery: front wall, side walls, Fast Clip CS, pegs and carry bag Bag Light (140 x 25 x 25 cm) for storing Privacy and poles, adapter kit for F35pro
The protection tent Rolli Plus Panoramic consists of two individual side panels and one front panel, made of Airtex fabric. Innovative equipment features such as the locking system for the roof and pitching poles, and the blacked-out foil of the large panoramic windows with Air-Vent function provide a high level of comfort for the travelling camper. The side panels are equipped with one Air-Vent window each, the front panels up to size 7 with 2, from size 8 onwards with 3 Air-Vent windows. The side panels as well as the front panel can be opened entirely and pulled back or detached to create a veranda. The left- and right-hand side of the separated front panel can be opened or detached separately. Moreover, the door integrated into the front panel can be attached left or right. A 15 cm high mud flap on the out-, and a 30 cm high mud flap on the inside are included in the standard version, as well as covered zips and curtains for the front and side panels.–Side and front panels have to be ordered separately!–
With the front wall extension, the Privacy Room can be easily adapted to the right awning size. Select a basic model according to your awning. Add a front wall extension to extend your awning to the length you want.
With the front wall extension, the Privacy Room can be easily adapted to the right awning size. Select a basic model according to your awning. Add a front wall extension to extend your awning to the length you want.
With the front wall extension, the Privacy Room can be easily adapted to the right awning size. Select a basic model according to your awning. Add a front wall extension to extend your awning to the length you want.