With the front wall extension, the Privacy Room can be easily adapted to the correct awning size. First select a basic model to suit your awning. Then extend it to the desired length with a front wall extension.
Just like the established Thule Residence, the Thule Panorama consists of a front panel and 2 side panels. It provides the same excellent stability and is as easy to pitch, also a partial installation is possible. The front panel is simply drawn into the lead rail of the awning and connected to the side panels, which are attached by a clamping profile to the awning fabric, via zipper. Thanks to the large panoramic windows, increased light incidence and a better view to the outside are provided. The front windows can be vertically opened as a door, or used horizontally for ventilation. All parts are completely detachable. A sufficient ventilation even in a closed tent is ensured thanks to the two ventilation striped integrated into the side panels. Moreover, both side windows are equipped with mosquito nets. The Thule Panorama is made of Airtex®, coated with acryl on one side and impregnated with a teflon-based finish. Thanks to the fungicide treatment, the water-repellent, washable material is effectively protected against fungal and mould infestation. Available in 3 heights, medium height is required for an installation height of 2.3 - 2.44 m (measured from the bottom edge of the awning cassette to the ground), large height for an installation height of 2.45 - 2.59 m and extra-large height for 2.6 - 2.74. Delivery includes 2 packing bags and mud flap.Front panel designDepending on the awning length, the design of the front panel varies without compromising on brightness or comfort. Wide front panels and slimmer spacers are combined. The large panoramic windows can be rolled up vertically and used as a door, or also removed entirely. Opened horizontally, they let some fresh air in.
Front Panel designThe design of the front panel varies depending on the awning's length without making a compromise in brightness or comfort. Larger and smaller front panels are combined. All front panels, even those with large panorama window, can completely be rolled up. The smaller front panels are used as entrance.
The approved awning tent Safari Residence presents the third generation with a new design. It consists of 2 single side panels and one front panel in neutral colour (RAL 9002). The window foils integrated in the side panels are equipped with mosquito nets and can be opened completely. The front panel (for lengths of more than 3.5 m) has a door on the left and on the right side and can be rolled up partly or completely. Thanks to the integrated fixation rail, the front can be combined very comfortably e.g. with a sun blocker. By means of a clamping profile the side panels are connected to the awning fabric. Front and sides are connected by a double piping profile – a strong and wind resistant connection. A height adjustable mast profile equipped with double rubber sealing, into which the side panels piping profile is slid in, is pressed to the vehicles side and perfectly seals this section. Additional stability is achieved by a diagonal support between the clamping and the mast profile. Thule Residence is available in 6 different heights (see table) for vehicles with straight sides. In case of an awning mounted straight above the vehicle's entrance, special side panels for combination with a higher front section with less roof pitch can be ordered via special order. All special orders have approx. 4 – 6 weeks delivery time. Delivery includes transport bags and vehicle apron.Mounting heightsHeight S 2.15 – 2.29 mHeight M 2.30 – 2.44 mHeight L 2.45 – 2.59 mHeight XL 2.60 – 2.74 mHeight XXL 2.75 – 2.89 mHeight 3XL 2.90 – 3.10 mFront panel designThe design of the front panel varies depending on the awnings length without making a compromise in brightness or comfort. Larger and smaller front panels are combined. All front panels, even those with large panorama window, can be rolled up completely. The smaller front panels are used as entrance.
Lighter version of the Privacy Room awning tent especially for the F80s.
Lightweight and compact for the summer or transitional period
Front wall with roll-up Crystal window and standard mosquito net and curtains, roll-up door
Additional front walls with fixed Crystal window and standard curtains
Side walls with roll-up blackout and mosquito net
Standard equipment: pegs and Bag Light (dimensions: 140 x 25 x 25 cm) for storing the Privacy and the poles
For an awning length of 300 cm, no front panels are required.
Scope of delivery: front part with roll-up window, mosquito net and door, 2 side walls with windows and mosquito net, curtain kit for the window of the front part, Fast Clip Light with internal clamp closures for quick and secure attachment to the awning, ground spike kit for secure anchoring, rubber cords with hooks, carry bag Bag Light (140 x 25 x 25 cm)
The flexible and lightweight Camper Lounge quickly creates more space, protection and privacy. It is quickly set up and taken down without tools – ideal for spontaneous stops. The system includes two side walls and a front wall that slides into the awning rail via the piping. The side walls can be flexibly attached to a Rafter pole (optional) or an articulated arm. Guy ropes, pegs and flutter stoppers are included. The Camper Lounge reliably protects you from sun, wind and light rain. Closable panorama windows ensure ventilation and a view. Suitable for awnings with an extension of 2.5 m and a width of 3 m – ideal for motorhomes.
Scope of delivery: 1 front wall, 2 side walls, flutter stopper, tensioning material, pegs, carry bagAwning not included!
The approved awning tent Safari Residence presents the third generation with a new design. It consists of 2 single side panels and one front panel in neutral colour (RAL 9002). The window foils integrated in the side panels are equipped with mosquito nets and can be opened completely. The front panel (for lengths of more than 3.5 m) has a door on the left and on the right side and can be rolled up partly or completely. Thanks to the integrated fixation rail, the front can be combined very comfortably e.g. with a sun blocker. By means of a clamping profile the side panels are connected to the awning fabric. Front and sides are connected by a double piping profile – a strong and wind resistant connection. A height adjustable mast profile equipped with double rubber sealing, into which the side panels piping profile is slid in, is pressed to the vehicles side and perfectly seals this section. Additional stability is achieved by a diagonal support between the clamping and the mast profile. Thule Residence is available in 6 different heights (see table) for vehicles with straight sides. In case of an awning mounted straight above the vehicle's entrance, special side panels for combination with a higher front section with less roof pitch can be ordered via special order. All special orders have approx. 4 – 6 weeks delivery time. Delivery includes transport bags and vehicle apron.Mounting heightsHeight S 2.15 – 2.29 mHeight M 2.30 – 2.44 mHeight L 2.45 – 2.59 mHeight XL 2.60 – 2.74 mHeight XXL 2.75 – 2.89 mHeight 3XL 2.90 – 3.10 mFront panel designThe design of the front panel varies depending on the awnings length without making a compromise in brightness or comfort. Larger and smaller front panels are combined. All front panels, even those with large panorama window, can be rolled up completely. The smaller front panels are used as entrance.
With the front wall extension, the Privacy Room can be easily adapted to the right awning size. Select a basic model according to your awning. Add a front wall extension to extend your awning to the length you want.
Convenient side wall with large window and groundsheet extension. Made of water-repellent, UV-resistant and washable vinyl. Simple assembly thanks to the included telescopic aluminium poles and ground spikes. Can be used on the left- and right-hand side. Incl. adapter.
Light awning tent which can be very easily and quickly set up right beneath the awning thanks to its patented design. The entire tent is made in one piece and needs no additional poles. When roof-mounted either the existing awning rail or an optional mounting set is used. For wall mounting, an optionally available mounting set is also needed. Connection of the front part is done by the awnings piping rail. The timelessly elegant design harmonizes with all awning colours. Thule QuickFit is equipped with integrated curtains on all windows. The rounded canopy, which is stretched by fast-mounted fibreglass poles, offers additional shade above the big picture windows, which can be opened completely. The side windows are equipped with fly screens. Access to the tent is possible either from the left or the right side of the front. The air layer between tent and awning enables good insulation to keep the tent cool. It is made of sturdy rip-stop polyester: a light, water-resistant and tear-proof fabric, which is also used in the aviation industry. Delivery includes bottom skirt, tensioning material and carrying bag.
Just like the established Thule Residence, the Thule Panorama consists of a front panel and 2 side panels. It provides the same excellent stability and is as easy to pitch, also a partial installation is possible. The front panel is simply drawn into the lead rail of the awning and connected to the side panels, which are attached by a clamping profile to the awning fabric, via zipper. Thanks to the large panoramic windows, increased light incidence and a better view to the outside are provided. The front windows can be vertically opened as a door, or used horizontally for ventilation. All parts are completely detachable. A sufficient ventilation even in a closed tent is ensured thanks to the two ventilation striped integrated into the side panels. Moreover, both side windows are equipped with mosquito nets. The Thule Panorama is made of Airtex®, coated with acryl on one side and impregnated with a teflon-based finish. Thanks to the fungicide treatment, the water-repellent, washable material is effectively protected against fungal and mould infestation. Available in 3 heights, medium height is required for an installation height of 2.3 - 2.44 m (measured from the bottom edge of the awning cassette to the ground), large height for an installation height of 2.45 - 2.59 m and extra-large height for 2.6 - 2.74. Delivery includes 2 packing bags and mud flap.Front panel designDepending on the awning length, the design of the front panel varies without compromising on brightness or comfort. Wide front panels and slimmer spacers are combined. The large panoramic windows can be rolled up vertically and used as a door, or also removed entirely. Opened horizontally, they let some fresh air in.
The modular panel system Thule Subsola provides an attractive living and lounge area while camping and is available for vehicles ranging from compact vans to motorhomes. It provides privacy and weather protection around the Thule awning. The triangular-shaped panels can be installed very easily and are, above all, very versatile in use: the first panel is attached to the awning. With high-quality zips, other panels can be attached at will and combined differently. An adjustable support pole allows to create more room, if necessary, or to adjust the panels to changing weather and lighting conditions. The individual doors are made of high-quality, breathable, water-resistant material and provide privacy as well as sun and rain protection. Subsola is available as a side and front package; packages can also be combined. If needed, individual panels and support poles can be added. The system is compatible with all Thule cassette awnings with an extension of 2 or 2.5 metres. A robust storage bag is included in delivery.Thule Subsola Front PackThe large panel is attached via the Keder rail in the front rail of the awning. The other panel included in the set can be connected to the right or left via zips.Scope of delivery:Thule Subsola Large panelThule Subsola Medium panelSupport poleRopes and pegsStorage bag
Practical, shade-providing front and side walls that perfectly complement your retractable awning. Made from 2Mesh fabric and crafted with great attention to detail, these robust and reliable accessories are the ideal solution to enhance your outdoor experience. The front and side walls are made from high-quality materials and are exceptionally durable, allowing them to withstand the elements year after year. Additionally, all Belvedèr panels feature a waterproof cover that can be rolled up and secured when not in use. With their sleek and professional appearance, they blend seamlessly into your existing awning system, giving your outdoor area a cohesive and stylish look. The front wall is suitable for awnings from all major manufacturers.
Convenient front wall made of mesh fabric. Drawn into the piping rail. Rollable with convenient fixing clips. Incl. tensioning material and ground spikes.
Designed for very short stays, weekend use or spontaneous trips.
One-piece design: roof, front and side walls
Double roof with ventilated airspace for better temperature regulation
Front wall with door and fixed crystal window, fully removable
Side walls with roll-up blackout and mosquito net
Ripstop polyester fabric: very light, resistant to tears and damage
Sides can be opened to extend the shaded area (optional with Kit Poles)
Scope of delivery: complete awning consisting of roof, front and side walls, mounting kit for Fiamma awnings, cross rafter kit for support, ground spike kit, carry bag Bag Light (140 x 25 x 25 cm)
The new BLOXX system by WIGO provides in the "Screen" version sun protection while granting an excellent air permeability. Different from that is the "View" version, which keeps prying eyes out while still permitting to look outside from the inside. The front panel is simply pulled into the piping rail of the awning, the side panel is slid onto the lateral roof rail and connected to the awning by Velcro. Both are tensioned to the ground with pegs. Delivery includes tensioning materials. The system is characterised by a low weight and a small packsize.
Just like the established Thule Residence, the Thule Panorama consists of a front panel and 2 side panels. It provides the same excellent stability and is as easy to pitch, also a partial installation is possible. The front panel is simply drawn into the lead rail of the awning and connected to the side panels, which are attached by a clamping profile to the awning fabric, via zipper. Thanks to the large panoramic windows, increased light incidence and a better view to the outside are provided. The front windows can be vertically opened as a door, or used horizontally for ventilation. All parts are completely detachable. A sufficient ventilation even in a closed tent is ensured thanks to the two ventilation striped integrated into the side panels. Moreover, both side windows are equipped with mosquito nets. The Thule Panorama is made of Airtex®, coated with acryl on one side and impregnated with a Teflon-based finish. Thanks to the fungicide treatment, the water-repellent, washable material is effectively protected against fungal and mould infestation. Available in 3 heights, medium height is required for an installation height of 2.3 - 2.44 m (measured from the bottom edge of the awning cassette to the ground), large height for an installation height of 2.45 - 2.59 m and extra-large height for 2.6 - 2.74. Delivery includes 2 packing bags and mud flap.Front panel designDepending on the awning length, the design of the front panel varies without compromising on brightness or comfort. Wide front panels and slimmer spacers are combined. The large panoramic windows can be rolled up vertically and used as a door, or also removed entirely. Opened horizontally, they let some fresh air in.
Convenient side wall with large window and groundsheet extension. Made of water-repellent, UV-resistant and washable vinyl. Simple assembly thanks to the included telescopic aluminium poles and ground spikes. Can be used on the left- and right-hand side. Incl. adapter.
The awning tent Modul Basic consists of 2 side panels and a front panel,
made of Airtex fabric. Innovative equipment features such as the
locking system of the roof and the pitching poles, the tinted foil of
the large panoramic windows with Air Vent function provide the travel
camper with a high level of comfort. The side panels are equipped with
an Air Vent window each, from size 7 on, the front panels are equipped
with an Air Vent window. All panels can be opened entirely, folded to
the veranda or detached. Both halves of the split front panel can be
opened or removed individually. Moreover, the door which is integrated
into the front panel can be attached to the left or the right. The
standard delivery includes a 15 cm high exterior and a 30 cm high
interior mud flap as well as covered zips.
Just like the established Thule Residence, the Thule Panorama consists of a front panel and 2 side panels. It provides the same excellent stability and is as easy to pitch, also a partial installation is possible. The front panel is simply drawn into the lead rail of the awning and connected to the side panels which are attached to the awning fabric by means of a clamping profile and a zipper.. Thanks to the large panoramic windows, increased light incidence and a better view to the outside are provided. The front windows can be opened vertically as a door or horizontally for ventilation. All parts are completely detachable. Sufficient ventilation is ensured even in a closed tent thanks to the two ventilation strips integrated into the side panels.Moreover, both side windows are equipped with mosquito nets. The Thule Panorama is made of Airtex®, coated with acrylic on one side and impregnated with a Teflon-based finish. Thanks to the fungicide treatment, the water-repellent, washable material is effectively protected against fungal and mould infestation. Available in 3 heights, medium height is required for an installation height of 2.3 – 2.44 m (measured from the bottom edge of the awning cassette to the ground), large height for an installation height of 2.45 – 2.59 m and extra-large height for 2.6 – 2.74 m. Delivery includes 2 packing bags and mud flap.Front panel designDepending on the awning length, the design of the front panel varies without compromising on brightness or comfort. Wide front panels and slimmer spacers are combined. The large panoramic windows can be rolled up vertically and used as a door or also removed entirely. Opened horizontally, they let some fresh air in.
Suitable for Dometic awnings PW 1000, PW 1500, PR 2000 and PR 2500 with a length from 3 – 4.5 m and a 2.5 m extensionExtremely fast and simple installation– only one person necessaryLow weightAs standard with mosquito net and roll-up PVC windowsSide panels available in 2 sizes: Medium (2.3 – 2.59 m) and large
(2.6 – 2.89 m) – measured from the bottom of the casing to the groundSpecial side panels for Fiat Ducato built since 07/2006Front panel fits both heights
Thule Subsola Side PackThe medium panels are attached to the right or left of the awning with a tensioning pole, and can be expanded with a small panel on top.Scope of delivery:2 x Thule Subsola Medium panelThule Subsola Small panelTensioning poleSupport poleRopes and pegsStorage bag
Tent especially designed for the vehicle types Fiat Ducato with H2 roof and the Ford Transit with H3 roof, which consists of a side panel pair with 2.5 m extension, both in colour RAL 9002. Through a clamping profile, the side panels are firmly connected to the awning fabric. The front panels are delivered with the draught skirt, which is attached to the vehicle via snaps.
The approved awning tent Safari Residence presents the third generation with a new design. It consists of 2 single side panels and one front panel in a neutral colour (RAL 9002). The window foils integrated into the side panels are equipped with mosquito nets and can be opened completely. The front panel (for lengths of more than 3.5 m) has a door on the left and right side and can be rolled up partly or completely. Thanks to the integrated fixation rail, the front can be combined very such as a sun blocker. By means of a clamping profile the side panels are connected to the awning fabric. Front and sides are connected by a double piping profile – a strong and wind-resistant connection. A height-adjustable mast profile equipped with double rubber sealing, into which the side panels piping profile is slid in, is pressed to the vehicle’s side and perfectly seals this section. Additional stability is achieved by a diagonal support between the clamping and the mast profile. Thule Residence is available in 6 different heights (see table) for vehicles with straight sides. In case of an awning mounted straight above the vehicle‘s entrance, special side panels for combination with a higher front section with less roof pitch can be ordered via special order. All special orders have an approximate delivery time of 4 – 6 weeks. Delivery includes transport bags and vehicle apron.Front panel designThe design of the front panel varies depending on the awning’s length without making a compromise in brightness or comfort. Larger and smaller front panels are combined. All front panels, even those with large panoramic window, can be rolled up completely. The smaller front panels are used as an entrance.