The LEVEL9 is the ideal solution for levelling your motorhome comfortably and precisely. This stepped levelling ramp weighs 2.1 kg and offers nine adjustable steps that can be optimally adapted to any situation – with a height of up to 18 cm. Thanks to the intuitive smartphone app, you receive a step-by-step guide to align your vehicle accurately. The compact and easy-to-use levelling system is supplied as a set with a bag for practical and tidy storage. For vehicles with a permissible total weight of up to 5 t.

The modular shelving system is perfect for transporting water equipment such as surfboards and canoes. The door can be opened while the equipment is loaded. Made of tubular aluminium columns and soft foam rubber. For up to five surfboards, three surfboards and one canoe or one surfboard and two canoes.

The bike carrier is suitable for two e-bikes or normal bikes. With the optional R-Bike 3Rail accessory, you can even transport three standard bikes. It is easy to install, easy to maintain and compatible with many accessories. Designed for converted vans. Complies with the ECE R26 regulations for vehicle installation.

The bike carrier is suitable for two e-bikes or normal bikes. With the optional R-Bike 3Rail accessory, you can even transport three standard bikes. It is easy to install, easy to maintain and compatible with many accessories. Designed for converted vans. Complies with the ECE R26 regulations for vehicle installation.

The battery charger LAS 1218 BUS, a compact and lightweight primary-phase switched power supply unit without fan, offers high charging currents for electronic block systems with SDT-BUS compatibility and temperature sensor. It supports lead-acid, lead-gel and AGM batteries and ensures a constant charging current even with mains voltage fluctuations. The device can also be used as a power supply without a battery, enables recharging of the starter battery up to 3 A, is up to 80% lighter than comparable thyristor chargers and is characterised by a high efficiency of around 90% without ripple voltage.

Power supply units power 12 V devices such as submersible pumps, fans, lamps, etc. They are particularly suitable for caravans that are predominantly connected to the 230 V power grid and only temporarily power devices using the vehicle battery.Output voltage 12.5 V DC, output current max. 24 AFive separately fused 12 V circuitsInstallation space (mounting rail 35 mm, 4TE) for 230 V basic supplyPriority switching for power supply; otherwise, devices are powered using the vehicle batteryUse without battery possible

The Schaudt LR 1218 is a PWM charge controller designed for use in motorhomes and caravans. It allows for the simultaneous charging of two batteries (e.g. starter and RV battery). The controller is designed for 12 V systems and provides a maximum charging current of 18 A. It is compatible with solar panels up to a power of 275 W.

The Booster WA 1208 increases the available charging voltage to max. 14.4 V while driving, resulting in the best possible charging of the caravan battery. The booster separates the caravan battery from the starter battery of the towing vehicle when the engine and ignition are switched off. Input voltage 9.0 – 14.5 VInput current max. 11 AOutput voltage 14.4 VPower output approx. 8 A at an input voltage of 12 VReturn current from caravan battery < 0.5 mA. When the ignition is off, no current flows.

Distribution unit which simplifies the power wiring in caravans and motorhomes, each section with 5 flat pins 6.3 x 0.8.

The bike carrier is suitable for two e-bikes or normal bikes. With the optional R-Bike 3Rail accessory, you can even transport three standard bikes. It is easy to install, easy to maintain and compatible with many accessories. Designed for converted vans. Complies with the ECE R26 regulations for vehicle installation.

The battery charger LAS 1218-2 is a primary-phase switched power supply unit without temperature compensation and with two charging characteristics. It is suitable for lead-acid and lead-gel batteries, stabilises the charging current in the event of mains fluctuations and can also function as a power source without a battery. It enables recharging of the starter battery up to 3 A, is around 80% lighter than comparable thyristor chargers, does not cause ripple voltage and has an efficiency of approx. 90%.

The accessories for the bike carrier R-Bike Van transform it into a versatile multi-purpose carrier that can transport various types of leisure equipment. Specially designed for use with R-Skirun and R-Wave accessories, this kit is easy to attach using screws. It includes two bars and the necessary fastening material.

The Booster WA 121525 is perfect for charging 12 V lead-acid, lead-gel, AGM and lithium batteries while driving (independent of the alternator's voltage). For alternators with energy-saving charging strategies (Euro 6), the application of a booster is required as the charging voltage is especially volatile (12.6 V to 15.0 V). With standard alternators, battery charging in the living area is also improved by the application of the booster WA 121525. With AGM batteries that require a charging voltage of 14.7 V, the use of a booster is indispensable. The booster WA 121525 is a clocked step-up/step-down converter making up for the volatile alternator voltage and provides a high charging current.Suitable for lead-acid, lead-gel, AGM and lithium batteriesCharacteristic curve: IUoUInput voltage: 12 V – 15 VEnd-of-charge voltage: 14.4 V/14.7 V, depending on battery type (at battery temperature of 25 °C)Current-dependent switching to charge retentionAverage charging current: 25 A (max. 30 A)Optional: temperature-compensated charging

The bike carrier is suitable for two e-bikes or normal bikes. With the optional R-Bike 3Rail accessory, you can even transport three standard bikes. It is easy to install, easy to maintain and compatible with many accessories. Designed for converted vans. Complies with the ECE R26 regulations for vehicle installation.

Snap-in installation, suitable for 12 V DC and 230 V AC, for wall thicknesses 1.0 up to 3.0 mm.

The classic. The electronic block EBL 211 contains a battery charger module, coordinates the complete 12 V circuit and assumes further control and regulation functions. Connection material is included. The LT 453 control panel and the complete connection material are included in the set as well.System control display LT 453LED displayVoltage indicator with 8 levels for living area and starter batteryVisual battery alarm when battery voltage is very lowTank level display with 4 levels for two water tanks12 V main switch with switch-on control230 V mains controlPump switch with switch-on controlDimensions (W x D x H): 180 x 25 x 112 mmElectronic block EBL 211 Bistable 12 V main switch relay and battery monitor module Charging module: characteristic curve IUoU, charging current 18 A for 6-cell lead-gel and AGM batteries Battery disconnector for winter shutdown Connection for solar charge controller LR(M) 1218 Dimensions (W x D x H): 275 x 170 x 130 mm Weight 1.9 kg

The bike carrier is suitable for two e-bikes or normal bikes. With the optional R-Bike 3Rail accessory, you can even transport three standard bikes. It is easy to install, easy to maintain and compatible with many accessories. Designed for converted vans. Complies with the ECE R26 regulations for vehicle installation.

For battery temperature-dependent charging for Booster WA 121545 and WA 121525.

The MPP solar controller LRM 1218 is a clocked converter that ensures perfect operation of the connected solar panels while the battery is in the main charging phase, regardless of solar radiation, battery voltage and panel temperature. Charging voltages are perfectly adapted to the RV battery with an optional temperature sensor and the various settings. The LRM 1218 is capable of SDTBUS. Delivery includes connection material and 2.5 m temperature sensor.Charging current into the RV battery max. 20 A (starter battery 2.5 A)Suitable for 6-cell 12 V lead-acid, AGM or lead-gel batteriesCharacteristics curve: IUoU, regulating principle: MPPCharging voltage range: 13.2 V – 14.9 V (temperature-controlled)

This accessory for the R-Bike Van offers a safe and stress-free way to transport skis and snowboards. The door can be opened while the skis are loaded. With locking system, padlock and an ergonomic release button. Made from anodised aluminium and injection-moulded plastic. For up to four pairs of coupled skis or two pairs of skis with two snowboards.

Battery monitor designed for electric consumers that need a lot of power (e.g. air conditioners).Cutoff voltage: 11.3 VSwitch-on voltage: 11.9 V Switched current: 50 A

The Booster WA 121545 is a clocked step-up/step-down converter with a very high level of efficiency. It balances the volatile alternator voltage and provides a high charging current. The booster is perfect for charging lead-acid, lead-gel, AGM1, AGM2 and lithium batteries while driving with 12 V mains power. If a battery temperature sensor is connected, the charging voltages are adapted to the battery’s temperature. To guarantee optimal charging, both the voltage of the living area battery and the voltage of the starter battery are measured with a voltage sensor. Scope of delivery: all accessories except the connection cables.Charging characteristic: IUoU (power-dependent switch to charge retention)Adjustable battery types:Lead-acid battery: 14.4 V/13.4 VLead-gel battery: 14.4 V/13.8 VAGM1 battery: 14.4 V/13.8 VAGM2 battery: 14.7 V/13.7 VLithium battery: 14.4 V constant (CCCV or IU characteristic for LiFePO4 batteries with an autonomous battery management systemTemperature compensation: automatic after connecting the temperature sensor, maximum charging voltage then: 15.0 VInput voltage range: 12.0 V – 15.0 VMaximum charging current adjustable to four levels: 45 A/55 A/63 A/70 ALevel of efficiency: ≥ 93% at maximum charging current

The OVP 01 surge protection device protects 230 V devices during surges and undervoltages. It is connected between the mains supply and the Schaudt devices that need protection. During a surge, the device disconnects the connected devices from the 230 V mains within milliseconds. The devices remain disconnected until the mains voltage is back to normal. Delivery includes an IEC extension.Two consumer outletsCutoff voltage RMS: < 175 V AC, > 265 V ACCut-off delay: 10 msec