Produkte von Victron
Nennstrom:
65 A
Smart BatteryProtect disconnects the battery from the less important consumers before it is fully discharged (which would damage it) or before it no longer has enough energy to start the engine. The on/off input can be used as a system on/off switch. By using Bluetooth to programme the Smart BatteryProtect, all required on/off thresholds can be set. Alternatively, one of nine preset on/off thresholds can be set using the programming pin.
Ladestrom:
7 A
The Blue Smart IP65 charger is the new professional battery charger with built-in Bluetooth! It can be used with devices in your workshop or with motor vehicles such as (classic) cars, motorbikes, boats and motorhomes.
The seven-stage charging algorithm gets the best out of your battery. The charger provides the battery with the energy it needs, keeps it in a healthy condition, ensures better performance ... and a longer life.
Unlike other brands, the Blue Smart IP65 charger will attempt to recharge a deeply discharged battery by forcing a weak charging current onto it. Normal charging will then resume as soon as there is sufficient voltage between the battery terminals.
The charger is supplied with both crocodile clips and M8 cable lugs, making it very easy to connect to the battery. You can leave the device connected at all times if you wish.
The Blue Smart IP65 charger has built-in Bluetooth. This allows you to check the status of the charger and the battery on a smartphone, tablet or laptop. All charger settings can be configured using the VictronConnect app.
Technical data
Input voltage: 230 V AC
Battery connection: 1.5 m black and red cable to DC plug
Incl. battery terminals and M8 ring cable lug
With CEE 7/7 connection (Schuko): 1.5 m
Variants from €68.00*
Nennstrom:
300 A
The SmartShunt is an all-in-one battery monitor that uses your phone as a display. The SmartShunt connects via Bluetooth to the VictronConnect app on your phone (or tablet), allowing you to conveniently read all monitored battery parameters, such as state of charge, remaining time, historical information and much more.Alternatively, the SmartShunt can be connected and read by a GX device. The connection to the SmartShunt is made via a VE.Direct cable.The SmartShunt is a good alternative to a BMV battery monitor, especially for systems where battery monitoring is required but less wiring and chaos are desired. The SmartShunt is equipped with Bluetooth, a VE.Direct connection and a connection that can be used for monitoring a second battery, monitoring the midpoint or connecting a temperature sensor. Input voltage: 6.5 – 70 V DC.
Ladestrom:
1,1 A
The Blue Smart IP65 charger is the new professional battery charger with built-in Bluetooth! It can be used with devices in your workshop or with motor vehicles such as (classic) cars, motorbikes, boats and motorhomes.
The seven-stage charging algorithm gets the best out of your battery. The charger provides the battery with the energy it needs, keeps it in a healthy condition, ensures better performance ... and a longer life.
Unlike other brands, the Blue Smart IP65 charger will attempt to recharge a deeply discharged battery by forcing a weak charging current onto it. Normal charging will then resume as soon as there is sufficient voltage between the battery terminals.
The charger is supplied with both crocodile clips and M8 cable lugs, making it very easy to connect to the battery. You can leave the device connected at all times if you wish.
The Blue Smart IP65 charger has built-in Bluetooth. This allows you to check the status of the charger and the battery on a smartphone, tablet or laptop. All charger settings can be configured using the VictronConnect app.
Technical data
Input voltage: 230 V AC
Battery connection: 1.5 m black and red cable to DC plug
Incl. battery terminals and M8 ring cable lug
With CEE 7/7 connection (Schuko): 1.5 m
Farbe:
grau
The main tasks of the Victron battery monitor are to measure the charging and discharging currents and to calculate the state of charge and the remaining battery life. If certain limits are exceeded (such as excessive discharge), an alarm is sent out. The battery monitor can also exchange data with the Victron Global Remote. This also applies to the sending of alarms.
Ladestrom:
30 A
Including Bluetooth Smart
The wireless solution for setting up, monitoring and updating the SmartSolar charge controller. For a wired data connection with a Colour Cerbo GX, other GX products, a PC or other devices.
Ultra-fast Maximum Power Point Tracking (MPPT)
Particularly in cloudy conditions, when the light intensity is constantly changing, an extremely fast MPPT controller improves the energy yield by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers.
Features:
Protection class: IP43
Connections: screw terminals for max. 6 mm² cable
VE.Direct for data exchange
Variants from €79.95*
Dauerleistung:
1400 W
The Orion XS is a powerful DC-DC charger for vehicles and motorhomes with dual battery systems. It reliably charges the RV or service battery via the starter battery and ensures stable charging conditions – even with modern Euro 5 and Euro 6 alternators, which often supply low or fluctuating voltages.Thanks to the wide input and output voltage range, the Orion XS also operates reliably over long cable runs, as commonly found in boats or motorhomes. It compensates for voltage drops and ensures the service battery is fully charged. At the same time, it protects the starter battery from unwanted discharge.The Orion XS can be operated either as a DC-DC charger or as a constant current source, offering a flexible solution for modern onboard power systems.
Variants from €395.00*
Dauerleistung:
1000 W
Inverters can be used to supply power to household appliances that require 230 V/120 V AC. Batteries for leisure applications or car batteries rated at 12 V DC are used for this purpose.
Variants from €198.00*
Ladestrom:
50 A
Including Bluetooth Smart
The wireless solution for setting up, monitoring and updating the SmartSolar charge controller. For a wired data connection with a Colour Cerbo GX, other GX products, a PC or other devices.
Ultra-fast Maximum Power Point Tracking (MPPT)
Particularly in cloudy conditions, when the light intensity is constantly changing, an extremely fast MPPT controller improves the energy yield by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers.
Features:
Protection class: IP43
Connections: screw terminals for max. 6 mm² cable
VE.Direct for data exchange
Variants from €79.95*
Ladestrom:
10 A
The Blue Smart IP65 charger is the new professional battery charger with built-in Bluetooth! It can be used with devices in your workshop or with motor vehicles such as (classic) cars, motorbikes, boats and motorhomes.
The seven-stage charging algorithm gets the best out of your battery. The charger provides the battery with the energy it needs, keeps it in a healthy condition, ensures better performance ... and a longer life.
Unlike other brands, the Blue Smart IP65 charger will attempt to recharge a deeply discharged battery by forcing a weak charging current onto it. Normal charging will then resume as soon as there is sufficient voltage between the battery terminals.
The charger is supplied with both crocodile clips and M8 cable lugs, making it very easy to connect to the battery. You can leave the device connected at all times if you wish.
The Blue Smart IP65 charger has built-in Bluetooth. This allows you to check the status of the charger and the battery on a smartphone, tablet or laptop. All charger settings can be configured using the VictronConnect app.
Technical data
Input voltage: 230 V AC
Battery connection: 1.5 m black and red cable to DC plug
Incl. battery terminals and M8 ring cable lug
With CEE 7/7 connection (Schuko): 1.5 m
Variants from €68.00*
Ladestrom:
5 A
The Blue Smart IP65 charger is the new professional battery charger with built-in Bluetooth! It can be used with devices in your workshop or with motor vehicles such as (classic) cars, motorbikes, boats and motorhomes.
The seven-stage charging algorithm gets the best out of your battery. The charger provides the battery with the energy it needs, keeps it in a healthy condition, ensures better performance ... and a longer life.
Unlike other brands, the Blue Smart IP65 charger will attempt to recharge a deeply discharged battery by forcing a weak charging current onto it. Normal charging will then resume as soon as there is sufficient voltage between the battery terminals.
The charger is supplied with both crocodile clips and M8 cable lugs, making it very easy to connect to the battery. You can leave the device connected at all times if you wish.
The Blue Smart IP65 charger has built-in Bluetooth. This allows you to check the status of the charger and the battery on a smartphone, tablet or laptop. All charger settings can be configured using the VictronConnect app.
Technical data
Input voltage: 230 V AC
Battery connection: 1.5 m black and red cable to DC plug
Incl. battery terminals and M8 ring cable lug
With CEE 7/7 connection (Schuko): 1.5 m
Variants from €68.00*
Dauerleistung:
400 W
Inverters can be used to supply power to household appliances that require 230 V/120 V AC. Batteries for leisure applications or car batteries rated at 12 V DC are used for this purpose.
Dauerleistung:
1600 W
The MultiPlus is a powerful inverter with a pure sine wave, an advanced battery charger that utilises adaptive charging technology and a high-speed AC voltage transfer switch all in a single compact housing.Technical data:Number of AC outputs: 2Nominal output: 3000 WMains current bypass: 50 A
The VE.Direct Bluetooth Smart Dongle connects to a non-Bluetooth enabled VE.Direct Victron product, which can then be accessed via Bluetooth using the VictronConnect app to facilitate monitoring, setup and firmware updates.
The BMV-7xx is a high-precision battery monitor. The main function of a battery monitor is to calculate the ampere-hours consumed and the state of charge of a battery. The ampere-hours consumed are calculated by integrating the current flowing into or out of the battery. Only type BMV-702 and BMV-712 Smart monitor the centre point voltage.
Nennstrom:
220 A
Smart BatteryProtect disconnects the battery from the less important consumers before it is fully discharged (which would damage it) or before it no longer has enough energy to start the engine. The on/off input can be used as a system on/off switch. By using Bluetooth to programme the Smart BatteryProtect, all required on/off thresholds can be set. Alternatively, one of nine preset on/off thresholds can be set using the programming pin.
Variants from €69.00*
Ladestrom:
20 A
Including Bluetooth Smart
The wireless solution for setting up, monitoring and updating the SmartSolar charge controller. For a wired data connection with a Colour Cerbo GX, other GX products, a PC or other devices.
Ultra-fast Maximum Power Point Tracking (MPPT)
Particularly in cloudy conditions, when the light intensity is constantly changing, an extremely fast MPPT controller improves the energy yield by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers.
Features:
Protection class: IP43
Connections: screw terminals for max. 6 mm² cable
VE.Direct for data exchange
Variants from €79.95*
Nennstrom:
500 A
The SmartShunt is an all-in-one battery monitor that uses your phone as a display. The SmartShunt connects via Bluetooth to the VictronConnect app on your phone (or tablet), allowing you to conveniently read all monitored battery parameters, such as state of charge, remaining time, historical information and much more.Alternatively, the SmartShunt can be connected and read by a GX device. The connection to the SmartShunt is made via a VE.Direct cable.The SmartShunt is a good alternative to a BMV battery monitor, especially for systems where battery monitoring is required but less wiring and chaos are desired. The SmartShunt is equipped with Bluetooth, a VE.Direct connection and a connection that can be used for monitoring a second battery, monitoring the midpoint or connecting a temperature sensor. Input voltage: 6.5 – 70 V DC.
Variants from €90.00*
The Victron inverter control VE.Direct allows for easy remote control of compatible inverters. The inverter can be switched on or off or set to ECO mode (depending on the model) via a switch. Ideal for hard-to-reach installations in motorhomes, boats or off-grid systems. Connection via VE.Direct cable (available separately).
Anschluss:
1 Ausgang
Blue Smart IP22 Charger is the new professional battery charger with built-in Bluetooth! Blue Smart IP22 Charger can be used with devices in your workshop or with motor vehicles such as (classic) cars, motorbikes, boats and motorhomes.
The wireless solution for monitoring voltage and current, changing settings and updating the charger when new functions are available. With an efficiency of up to 94%, these chargers generate up to four times less heat compared to the industry standard. The Blue Smart Charger has a microprocessor-controlled "adaptive" battery management system. The adaptive function automatically optimises the charging process depending on the way the battery is used.
Dauerleistung:
650 W
Inverters can be used to supply power to household appliances that require 230 V/120 V AC. Batteries for leisure applications or car batteries rated at 12 V DC are used for this purpose.
Variants from €198.00*
Das Ekrano GX ist die nächste Generation der GX-Produktfamilie. Mit seinen zahlreichen Anschlüssen und Schnittstellen sowie einem eingebauten 7-Zoll-Touchscreen-Display ist es das bisher leistungsstärkste GX-Gerät. Im Grunde vereint es das Cerbo GX mit dem Touch 70 GX in einem Gerät, zusätzlich bestückt mit einem leistungsstärkeren Prozessor und weiteren Features.
Ekrano GX ist das Herzstück Ihrer Energieanlage. Alle anderen Victron Systemkomponenten – wie Wechselrichter/Ladegeräte, Solarladegeräte, Batterien usw. – sind daran angeschlossen. Das Ekrano GX sorgt dafür, dass alles harmonisch miteinander arbeitet.
The Blue Smart IP65 charger is the new professional battery charger with built-in Bluetooth! It can be used with devices in your workshop or with motor vehicles such as (classic) cars, motorbikes, boats and motorhomes.
The seven-stage charging algorithm gets the best out of your battery. The charger provides the battery with the energy it needs, keeps it in a healthy condition, ensures better performance ... and a longer life.
Unlike other brands, the Blue Smart IP65 charger will attempt to recharge a deeply discharged battery by forcing a weak charging current onto it. Normal charging will then resume as soon as there is sufficient voltage between the battery terminals.
The charger is supplied with both crocodile clips and M8 cable lugs, making it very easy to connect to the battery. You can leave the device connected at all times if you wish.
The Blue Smart IP65 charger has built-in Bluetooth. This allows you to check the status of the charger and the battery on a smartphone, tablet or laptop. All charger settings can be configured using the VictronConnect app.
Technical data
Input voltage: 230 V AC
Battery connection: 1.5 m black and red cable to DC plug
Battery connection scope of delivery: battery terminals and M8 ring cable lug
With CEE 7/7 connection (Schuko): 1.5 m
Dauerleistung:
2400 W
The MultiPlus is a powerful inverter with a pure sine wave, an advanced battery charger that utilises adaptive charging technology and a high-speed AC voltage transfer switch all in a single compact housing.Technical data:Number of AC outputs: 2Nominal output: 3000 WMains current bypass: 50 A
Variants from €999.90*