Sealing tape for cars, houses, caravans and boats. The sealing tape is adhesive on both sides and based on synthetic rubber. Sealing tape width: 20 mm. Sealing tape height: 2 mm.Product advantages: Adheres to all clean and dry surfaces Can be painted over to a limited extent Very high water and ageing resistance Low adhesive power

TEROSON WX 990 is a sprayable wax-based rust inhibitor. After thorough drying, a firmly adhering, plastically tough and water-repellent film remains. Since the flow point of the dry substance is above 100 °C, there is no risk of it running off or dripping even in the engine compartment. The dry film adheres to untreated and painted sheet metal.AdherentWater-repellentTransparentTack-free drying

TEROSON® RB 274 is a white, high-quality, pressure-sensitive sealing tape based on butyl rubber with plasto-elastic properties and high resilience. It has good ageing resistance, a high UV resistance and strong adhesion. It is mainly used in caravan construction for sealing overlaps in exterior cladding, decorative and cover strips, and rubber moulded parts against the exterior cladding.

TEROSON MS 939 is an industrial adhesive for high-strength, flexible bonding. The adhesive is perfect for bonding satellite antennas, solar panels and awnings.Incredibly versatileHigh strengthGood elasticityExcellent weather and UV resistance

TEROSON® SB 450 is perfectly suited for cleaning and promoting adhesion of elastic adhesives/sealants on metals, plastics and painted surfaces.The clear, colourless, alcoholic one-component solution has been specially developed for cleaning and promoting adhesion on hard-to-bond surfaces. For cleaning hard-to-bond surfaces Improved adhesion on hard-to-bond surfaces Alcoholic solution

The TEROSON® EP 5020 TR is a powerful 2-component epoxy adhesive for the reliable repair of bodywork metal surfaces. As a solvent-free and lead-free tin-solder replacement, it offers a modern alternative to traditional tin soldering and impresses with easy handling, high durability and fast curing. Features: 2-component system: dark grey component A, white/light grey component B Free from solvents, isocyanates, silicone and lead Excellent replication properties for steel and aluminium surfaces Durable repair solution – does not shrink or sink in Applicable without open flame – ideal for safety-critical areas Application and advantages: This 2K adhesive has been specially developed for the rapid replication of metal surfaces. It is ideal for: Filling dents and levelling damage Modelling drawn-out dents in hard-to-reach areas Repairing weld seams on vehicle bodywork Thanks to the easy application, you save valuable working time as no parts such as airbags, plastic components, fabrics or fuel tanks need to be dismantled. Processing time and handling: Processing time: ≤ 10 minutes at 22 °C (72 °F) Sanding: can be excellently worked and prepared for further paint build-up Durable results: stable, even surfaces without subsequent shrinkage

The stable 2-component adhesive with very high viscosity cures to an elastic product independently of the humidity. It is free from solvents, isocyanates and silicones and is suitable for bonding both indoors and outdoors.TEROSON® MS 9399 is a good choice when excellent UV and wear resistance are required. After mixing, this highly viscous 2-component adhesive cures at room temperature, is quickly surface-dry and has a high initial strength. It is also perfectly suited as an elastic adhesive, for example in caravan construction, the rail vehicle industry or shipbuilding. Cures independently of humidity Easy-to-handle system Quickly surface-dry High initial strength

BONDERITE® M-NT 1455-W wipes are ready to use and make metal pretreatment processes very quick and easy. They create a good adhesion primer for paints or sealants and increase corrosion resistance for subsequent painting. The product is quick and easy to apply by wiping motion and is ideal as a conversion coating on bare metal surfaces due to its excellent corrosion protection properties. It is a chrome-free product with very low VOC content. No equipment or tools are required for application (no cleaning of spray equipment, no spray mist). Please note: BONDERITE M products are used in the surface modification of metals and are usually applied in a multi-stage process. The functional properties of these surface treatments are influenced by various factors, including the previous cleaning or pickling operations (BONDERITE C portfolio), the line design or process parameters.Ready-to-use wipes only for the conversion and protection of bare metal surfaces before coating or painting (steel, aluminium, stainless steel)Excellent corrosion protectionCreates a good adhesive base for lacquers or sealantsTime-saving (no wash / etch primer, no rinsing, no cleaning after application).Easy to apply (especially for large surfaces)Replaces other complex and time-consuming methodsChrome-freeLow VOC content < 1%Water-basedContents: 50 wipes

Flexible, double-sided adhesive butyl sealing tape for overlapping seals. Cannot be painted over. Size: 25 x 1.5 mm.Product advantages:Secure an durable gluingSelf-weldingVery high water and ageing resistanceHigh adhesive power

One-component adhesive on MS Polymer basis, for the bonding of the inner/outer walls for small repairs. Processing: apply the glue in waves, press on the plate, wipe off excessive material. Adhesive and sealing in one.

TEROSON VR 10 is a liquid pre-treatment agent. It is based on a liquid hydrocarbon free of aromatics and low in n-hexane. The product does not contain any chlorinated hydrocarbons and does not attack paint when applied for a short time. TEROSON VR 10 does not prevent adhesives/sealants from hardening.

TEROSON® SB 450 is perfectly suited for cleaning and promoting adhesion of elastic adhesives/sealants on metals, plastics and painted surfaces.The clear, colourless, alcoholic one-component solution has been specially developed for cleaning and promoting adhesion on hard-to-bond surfaces. For cleaning hard-to-bond surfaces Improved adhesion on hard-to-bond surfaces Alcoholic solution

TEROSON® MS 935 is an industrial adhesive for elastic bonding with medium/high strength. The product has a broad adhesion spectrum and can be used without a primer. It offers excellent UV and weather resistance and is paintable. TEROSON MS 935 is easy to smooth and has high stability due to thixotropic properties. Excellent resistance to environmental influences High stability No primer required Paintable

TEROSON MS 939 is an industrial adhesive for high-strength, flexible bonding. The adhesive is perfect for bonding satellite antennas, solar panels and awnings.Incredibly versatileHigh strengthGood elasticityExcellent weather and UV resistance

Sprayable butyl sealing tape for use in caravans and motorhomes. Cold processing at room temperature. Stable, solvent-based, elastoplastic sealing compound, easy to dab off. Medium adhesion. Very good water and ageing resistance.Areas of application: Skylight replacements Window replacementsAwnings/rear carriers/reversing cameras

The stable 2-component adhesive with very high viscosity cures to an elastic product independently of the humidity. It is free from solvents, isocyanates and silicones and is suitable for bonding both indoors and outdoors.TEROSON® MS 9399 is a good choice when excellent UV and wear resistance are required. After mixing, this highly viscous 2-component adhesive cures at room temperature, is quickly surface-dry and has a high initial strength. It is also perfectly suited as an elastic adhesive, for example in caravan construction, the rail vehicle industry or shipbuilding. Cures independently of humidity Easy-to-handle system Quickly surface-dry High initial strength

Anthracite-coloured two-component repair adhesive for plastic body partsTEROSON® PU 9225 is a polyurethane-based adhesive for repairs on paintable plastic parts in the interior and exterior of vehicles. One component (A) is yellow, the other (B) black. The product is often used to repair bumpers, trims and body parts made of plastics such as PP/EPDM, SMC, PC, PA, ABS and PUR, especially for minor damage like scratches or holes in bumpers, spoilers, skirts, etc.The best processing results are achieved using the TEROSON® hand spray gun (50 ml cartridges) or the TEROSON® STAKU hand pressure gun (250 ml cartridges) with a suitable static mixer.Before application, cleaning the surface with TEROSON VR 10 and pretreating it with TEROSON® VR 155 is recommended.TEROSON® PU 9225 ME cures at room temperature. Curing can be accelerated with infrared radiation at 60 °C (140 °F). Recommended for repair areas over 7 cm Pot life: 10 minutes Sandable after 20 minutes (23 °C/73 °F, 50% relative humidity) Can be overpainted with all car paints (apply TEROSON VR 155 as a primer) OEM-compliant repair solution

Medium/high-strength industrial sealant for elastic sealing. Wide adhesion spectrum and good weather resistance. TEROSON MS 935 can be used without a primer. The product is very UV-resistant and can be painted over. TEROSON MS 935 is easy to smooth and achieves high stability due to thixotropic properties. The sealant is suitable for interior and exterior application. Skin forming time: 15 – 20 min.

The xylene-free plastic primer TEROSON® VR 155 is used for surface preparation in bodywork repairs. It has no hazardous substance labelling and is easy to apply. It is applied to plastic parts before painting or assembly. This ensures better adhesion of plastic repair adhesives (TEROSON® PU 9225 SF/UF/ME), plastic fillers (TEROSON® UP 250) and sealants based on MS or PU (TEROSON® MS 9220 or TEROSON® PU 9200). Easy-to-use spray Excellent adhesion promoter/primer For paintable plastic parts, plastic fillers based on PES and sealants based on MS or PU Very short flash-off time of 5 minutes

The stable 2-component adhesive with very high viscosity cures to an elastic product independently of the humidity. It is free from solvents, isocyanates and silicones and is suitable for bonding both indoors and outdoors.TEROSON® MS 9399 is a good choice when excellent UV and wear resistance are required. After mixing, this highly viscous 2-component adhesive cures at room temperature, is quickly surface-dry and has a high initial strength. It is also perfectly suited as an elastic adhesive, for example in caravan construction, the rail vehicle industry or shipbuilding. Cures independently of humidity Easy-to-handle system Quickly surface-dry High initial strength

Sprayable butyl sealing tape for use in caravans and motorhomes. Cold processing at room temperature. Stable, solvent-based, elastoplastic sealing compound, easy to dab off. Medium adhesion. Very good water and ageing resistance.Areas of application: Skylight replacements Window replacementsAwnings/rear carriers/reversing cameras

Medium/high-strength industrial sealant for elastic sealing. Wide adhesion spectrum and good weather resistance. TEROSON MS 935 can be used without a primer. The product is very UV-resistant and can be painted over. TEROSON MS 935 is easy to smooth and achieves high stability due to thixotropic properties. The sealant is suitable for interior and exterior application. Skin forming time: 15 – 20 min.

Low-solvent butyl rubber sealant.High adhesive power on all common surfacesEasy to smoothGood stabilityVisco-plasticCoatableTEROSON RB 4006 is used for sealing mechanically fixed overlapping joints on frame constructions, facades, steel and sheet constructions, e.g. air conditioners and silos.

Anthracite-coloured two-component repair adhesive for plastic body partsTEROSON® PU 9225 is a polyurethane-based adhesive for repairs on paintable plastic parts in the interior and exterior of vehicles. One component (A) is yellow, the other (B) black. The product is often used to repair bumpers, trims and body parts made of plastics such as PP/EPDM, SMC, PC, PA, ABS and PUR, especially for minor damage like scratches or holes in bumpers, spoilers, skirts, etc.The best processing results are achieved using the TEROSON® hand spray gun (50 ml cartridges) or the TEROSON® STAKU hand pressure gun (250 ml cartridges) with a suitable static mixer.Before application, cleaning the surface with TEROSON VR 10 and pretreating it with TEROSON® VR 155 is recommended.TEROSON® PU 9225 ME cures at room temperature. Curing can be accelerated with infrared radiation at 60 °C (140 °F). Recommended for repair areas over 7 cm Pot life: 10 minutes Sandable after 20 minutes (23 °C/73 °F, 50% relative humidity) Can be overpainted with all car paints (apply TEROSON VR 155 as a primer) OEM-compliant repair solution