The safe is bolted to the driver's or passenger's seat console using the original fastening screws. No holes need to be drilled.

The perfect safe for vansThe door can be removed after it is unlocked. The original screw connections of the seat consoles are always used for fastening. It is not necessary to drill holes into the vehicle. The dimensions of the safes ensure that the space underneath the seat is optimally utilised.

The safe is screwed onto a previously glued (adhesive not included) mounting plate in the map pocket of the passenger door. For the installation of the door safe, we recommend Sikaflex 554 (451/206) for gluing the mounting plate.Only for the passenger door.

The Mobil-Safe has an impact- and scratch-resistant finish, a steel door with a double-bit security lock (7 tumblers) and a manganese-hardened lock plate to prevent drilling. The internal door and the rear handle angle protect the safe from being prised open. Incl. fastening material. Door on the side (Safe 1) or on top (Safe 3, 5, Pössl/Globecar).

The perfect safe for vansThe door can be removed after it is unlocked. The original screw connections of the seat consoles are always used for fastening. It is not necessary to drill holes into the vehicle. The dimensions of the safes ensure that the space underneath the seat is optimally utilised.

For installation in the bottom of the rear left cabinet. The safe is screwed into the holes provided there. Screwing material included in delivery.

The perfect safe for vansThe door can be removed after it is unlocked. The original screw connections of the seat consoles are always used for fastening. It is not necessary to drill holes into the vehicle. The dimensions of the safes ensure that the space underneath the seat is optimally utilised.

The Mobil-Safe has an impact- and scratch-resistant finish, a steel door with a double-bit security lock (7 tumblers) and a manganese-hardened lock plate to prevent drilling. The internal door and the rear handle angle protect the safe from being prised open. Incl. fastening material. Door on the side (Safe 1) or on top (Safe 3, 5, Pössl/Globecar).

The perfect safe for vansThe door can be removed after it is unlocked. The original screw connections of the seat consoles are always used for fastening. It is not necessary to drill holes into the vehicle. The dimensions of the safes ensure that the space underneath the seat is optimally utilised.

The safe is screwed onto a previously glued (adhesive not included) mounting plate in the map pocket of the passenger door. For the installation of the door safe, we recommend Sikaflex 554 (451/206) for gluing the mounting plate.

The door safe is installed in the original Fiat driver's cab doors. The safe is locked with tried and tested high-quality locks made in Germany. Comes with a mat to cover the door.Scope of delivery: safe, fastening material, installation instructions

Screwdrivers can no longer be driven between the door handle grip plate and the sheet metal in order to get to the underlying linkage of the lock mechanism. Suitable for Iveco Daily built since 2014, Fiat Ducato built since 06/2006 and identical vehicles. Suitable for driver's door, passenger door, side door and tailgate. Two pieces for easy installation.

The mobile safe is made of 2.5/3 mm SM steel and is coated with an impact- and scratch-resistant powder. The door is made of 5 mm SM steel and has a double-bit security lock. The lock is a German brand product with 7 tumblers. A manganese-hardened lock plate prevents drilling. Due to the 2 cm inner door, the mobile safe cannot be pried open. In addition, the door is secured with a rear handle bracket. This seat base safe is screwed to the rear factory screw connection of the seat console. Access to the safe via the openings in the side of the console. The safe can be installed under the driver or passenger console.

The door safe is installed in the original Fiat driver's cab doors. The safe is locked with tried and tested high-quality locks made in Germany. Comes with a mat to cover the door.Scope of delivery: safe, fastening material, installation instructions

The perfect safe for vansThe door can be removed after it is unlocked. The original screw connections of the seat consoles are always used for fastening. It is not necessary to drill holes into the vehicle. The dimensions of the safes ensure that the space underneath the seat is optimally utilised.

The safe is bolted to the driver's or passenger's seat console using the original fastening screws. No holes need to be drilled.

The perfect safe for vansThe door can be removed after it is unlocked. The original screw connections of the seat consoles are always used for fastening. It is not necessary to drill holes into the vehicle. The dimensions of the safes ensure that the space underneath the seat is optimally utilised.

The Mobil-Safe has an impact- and scratch-resistant finish, a steel door with a double-bit security lock (7 tumblers) and a manganese-hardened lock plate to prevent drilling. The internal door and the rear handle angle protect the safe from being prised open. Incl. fastening material. Door on the side (Safe 1) or on top (Safe 3, 5, Pössl/Globecar).

The perfect safe for vansThe door can be removed after it is unlocked. The original screw connections of the seat consoles are always used for fastening. It is not necessary to drill holes into the vehicle. The dimensions of the safes ensure that the space underneath the seat is optimally utilised.

The door safe is installed in the original Fiat driver's cab doors. The safe is locked with tried and tested high-quality locks made in Germany. Comes with a mat to cover the door.Scope of delivery: safe, fastening material, installation instructions

The perfect safe for vansThe door can be removed after it is unlocked. The original screw connections of the seat consoles are always used for fastening. It is not necessary to drill holes into the vehicle. The dimensions of the safes ensure that the space underneath the seat is optimally utilised.

The perfect safe for vansThe door can be removed after it is unlocked. The original screw connections of the seat consoles are always used for fastening. It is not necessary to drill holes into the vehicle. The dimensions of the safes ensure that the space underneath the seat is optimally utilised.

Simply exchange one of the original screws with this security screw. The screw can only be tightened or loosened with the included code nut. Suitable for Easy-Fix X 250 (item no. 250/729) and Easy-Fix X Laptop (item no. 250/720).

The Mobil-Safe has an impact- and scratch-resistant finish, a steel door with a double-bit security lock (7 tumblers) and a manganese-hardened lock plate to prevent drilling. The internal door and the rear handle angle protect the safe from being prised open. Incl. fastening material. Door on the side (Safe 1) or on top (Safe 3, 5, Pössl/Globecar).