Festoon lamp for vehicle lighting, small displays, indicator lamps of devices and door bell nameplates.

Standard car bulb in various designs. Suitable for your vehicle. 

Many Euro 5 and almost all Euro 6 vehicles are equipped with an intelligent alternator. The function of 12 V isolating relays and D+ simulators is now only partially possible. A charging booster or BCB must be installed for charging the RV battery/batteries. After the engine stops, the relay disconnects the starter and the RV battery. Switching current (max.) 70 A.

With the FLY 2.5 mm² PVC vehicle cable (NO7V-K), you can determine the required cable length yourself – ideal for flexible applications such as connecting batteries, inverters or battery chargers. Simply cut to the desired length and perfectly tailor it to your needs.

The cable reel 4 mm² (FLY 4 mm² PVC vehicle cable NO7V-K) offers versatile applications, e.g. for connecting batteries, inverters or battery chargers. The flexible cable can be cut to size individually, thus perfectly adapting to your requirements. Ideal for applications where precise adjustments are necessary.

Solder connector with shrinking tube insulation.

Double-function bulb with 2 filaments.1 x 21 W 1 x 5 W.Light colour: orange.

Dual-function bulb with 2 filaments.

Replacement Menbaa motor vehicle xenon bulb for your headlights.

The FLY 1.5 mm² PVC vehicle cable (NO7V-K) is ideally suited for electrical installations in vehicles and versatile wiring projects. Thanks to its fine-stranded and flexible nature, it is easy to install. With a robust PVC insulation, it ensures a reliable power supply and durability. The cable is supplied in a convenient 100-metre reel, providing ample material for a variety of applications.

The FLY 1.5 mm² PVC vehicle cable (NO7V-K) is ideally suited for electrical installations in vehicles and versatile wiring projects. Thanks to its fine-stranded and flexible nature, it is easy to install. With a robust PVC insulation, it ensures a reliable power supply and durability. The cable is supplied in a convenient 100-metre reel, providing ample material for a variety of applications.

For the front left or rear left. Type-approved, horizontally foldable, half the size of common warning signs. Scope of delivery: 2 mm thick aluminium sheet, raised edge on all sides, with swivel for fixing to the vehicle. With reflecting film. Guaranteed to be able to withstand carwashes and high-pressure cleaners.

The universal cable with a cross-section of 70 mm² is required for connecting batteries, inverters or battery chargers. The colours can be used to distinguish the poles. With the 10 m cable, you can decide for yourself what length you need. Outer material (insulation) TM2. Cable type: ELFLEX.

Standard car bulb in various designs. Suitable for your vehicle. 

The 9 mm wide clamp made of stainless spring steel is suitable for pipes and hoses from 8 to 60 mm, depending on the size. The dimension ø indicates the largest pipe/hose diameter.

DIN plug with bayonet coupling, waterproof according to IP55.

Festoon lamp for vehicle lighting, small displays, indicator lamps of devices and door bell nameplates.

With the FLY 2.5 mm² PVC vehicle cable (NO7V-K), you can determine the required cable length yourself – ideal for flexible applications such as connecting batteries, inverters or battery chargers. Simply cut to the desired length and perfectly tailor it to your needs.

Self-adhesive, ø 20 cm.

Reflective (yellow) and fluorescent (red) warning sign Spain for car/trailer lengths > 12 m, ECE Regulation 70.01.In Spain, car/trailer combinations over 12 m in length must be marked, either by a large panel or two small adjacent ones in yellow with red border. The warning signs must be placed at a distance of 50 to 150 cm above the ground.Long warning sign for mounting at the rear (central)Short warning sign for mounting at the rear (left and right)

Suitable halogen replacement bulb for your headlight.

Festoon lamp for vehicle lighting, small displays, indicator lamps of devices and door bell nameplates.

This cable set is suitable, for example, for connecting an inverter to a battery. The set includes one red and one black cable with a cross-section of 70 mm² and is equipped with M8 connectors. Outer material (insulation): TM2. Cable type: ELFLEX.

Solder connector with shrinking tube insulation.