With the EUFAB SD260 storage bag, you can store your bike carrier dust-free in your garage or transport it safely in the car.

Protects your bike when you transport it on a bike carrier or in your vehicle. Fastened with sturdy Velcro fasteners. Robust and washable on the outside. Padded on the inside. With convenient storage bag. Outer material: 100% polyester (Oxford 600D) with PVC coating.Scope of delivery: 1 storage bag, 2 rim protectors, 1 chain protector, 1 frame protector, 1 pedal protector, 1 fork protector

With the storage bag for the EUFAB ProBC3, you can store your bike carrier dust-free in your garage or transport it safely in your car.

This precisely fitting pipe with integrated lamp holder provides a reliable attachment option for the lighting units on the tow bar carrier.

Folding mechanism lamp holder set with screws and bolts compatible with the SD260 tow bar carrier.

Extension for bike carriers of the ProBC series. For transporting a 3rd/4th bike. With lockable and detachable strap frame holders.

Suitable for transporting bikes on the tow bar of vans, caravans, high-roof estate cars with double rear doors and cars. The slide rails (extension: approx. 70 cm) allow you to open doors with a width of up to 85 cm.Strap frame holder, specially designed for sensitive framesEasy and fast attachment with quick-release connection systemAlso suitable for oversized bikes and for bikes with Y frameRobust aluminium rails with plastic bicycle holdersWheelbase: max. 130 cmMax. tyre width in the rail: 3.25 inchesLighting connection: 13-pin plugDim. extended (W x H x D): approx. 108 x 75 x 130 cm

For transporting a third bicycle on the SD260. With a lockable strap frame holder on both sides. Max. tyre width: approx. 3.25 inches/80 mm

For transporting a third bicycle on the SD260. With a lockable strap frame holder on both sides. Max. tyre width: approx. 3.25 inches/80 mm

Universal ramp for tow bar carriers for all EUFAB bike carriers. Saves lifting the bikes onto the bike carrier; they can simply be pushed on. Folding version for space-saving storage in the boot. For tyre widths of approximately 8 to 10 cm. Variable height of approximately 40 to 60 cm.

The fastening claw with strap was specially developed for U-shaped tubes (ø 2.5 – 3 cm). The lockable swivel joint allows for installation in complicated places. Thanks to the split clamp, the frame holder can be quickly attached and removed. Suitable for all EUFAB bike carriers and many other models (please pay attention to the diameter). Suitable for bicycles with frame diameters of 3 to 10 cm. Ideal for quick and secure fastening.

Steel beam for attaching the rear carrier to the drawbar. Transport up to two bicycles (Mind the manufacturer's bearing load!).

Replacement lens cover for all EUFAB bike carriers of the ProBC series and SD260 from 2014 onwards.

With the right storage bag for your EUFAB bike carrier, you can store your bike carrier dust-free in your garage or transport it safely in your car. Perfect fit Protects against dust, dirt and damage Ideal for storage in the garage and transport in the car High-quality and durable material

Suitable for vans with extremely large boot lids, e.g. for VW T5/T6, as the carrier has a greater distance to the vehicle. Can be extended to carry 3 bikes if required.

For all EUFAB bike carrier models. Also suitable for other bike carrier brands (please note the frame diameter). Frame diameter of the bike from 3 – 6 cm.

Can be extended to carry 4 bikes if required.

With the EUFAB ProBC2+ storage bag, you can store your bike carrier dust-free in your garage or transport it protected in your car.

Protective cover for the tail light for the models ProBC2, ProBC2+, ProBC 3 and Premium TG.

This precisely fitting pipe with integrated lamp holder provides a reliable attachment option for the lighting units on the tow bar carrier.

The EUFAB BS260 is a lightweight, extra-narrow drawbar carrier for two bicycles and allows for easy access to the storage box thanks to an extendable sliding system. It is compatible with almost all caravan drawbars and is attached without drilling using fastening clamps. The aluminium profile rails can support up to 30 kg per rail, are suitable for wheelbases up to 135 cm and securely hold bicycles with removable frame holders, lashing straps and ratchets. Ideal for tyres up to 2.35 inches.

Replacement lens cover for all EUFAB bike carriers of the ProBC series and SD260 from 2014 onwards.

Protect the tail light of your SD260 tow bar carrier reliably from external influences. The lamp protection with integrated folding mechanism was specially designed for the SD260 carrier and offers an easy yet effective solution to prevent damage during transport or when stationary. The folding function allows access to the light at any time – ideal for maintenance and cleaning without complicated disassembly.

Suitable for transporting bikes on the tow bar of vans, caravans, high-roof estate cars with double rear doors and cars. The slide rails (extension: approx. 70 cm) allow you to open doors with a width of up to 85 cm.Strap frame holder, specially designed for sensitive framesEasy and fast attachment with quick-release connection systemAlso suitable for oversized bikes and for bikes with Y frameRobust aluminium rails with plastic bicycle holdersWheelbase: max. 130 cmMax. tyre width in the rail: 3.25 inchesLighting connection: 13-pin plugDim. extended (W x H x D): approx. 108 x 75 x 130 cm