The screw-on magnetic fittings can be used either frontally or laterally depending on the design. They can be securely and stably mounted with two screws. The wide versions with two elongated holes each allow for precise adjustment of the position.The screw-on magnetic fittings impress with a housing made of powder-coated metal, which ensures both a high-quality appearance and high strength. With a construction height of only 10 mm, the system is particularly flat and discreet. A powerful neodymium magnet guarantees reliable holding force* (25 N/2.5 kg). The rubberised contact surface protects against scratches and ensures a pleasant, quiet closing sound. In summary: robust, high-quality and aesthetically pleasing.* The forces were determined at room temperature on a polished steel plate (S235JR according to DIN 10 025) with a thickness of 10 mm (1 kg ~ 10 N). A deviation of up to -10% from the specified value is possible in exceptional cases. Generally, the value is exceeded. The type of application (installation situation, temperatures, counter-anchors, etc.) can significantly influence the forces. The specified values are for guidance.

This high-quality magnetic door stop with rubber buffer reliably holds doors and hatches open. The rubberised magnetic system dampens impacts well and protects against scratches. Attach the stop to the back of a door or directly to the wall and ensure a suitable counterpart. With an overall length of 65 mm and a hole distance of 50 mm, this door stop is the ideal solution.NdFeB, 2 x drill holes ø 5 mm, hole distance 50 mm, rubberised including damping, holding force*: 60 N/6 kg* The forces were determined at room temperature on a polished steel plate (S235JR according to DIN 10 025) with a thickness of 10 mm (1 kg ~ 10 N). A deviation of up to -10% from the specified value is possible in exceptional cases. Generally, the value is exceeded. The type of application (installation situation, temperatures, counter-anchors, etc.) can significantly influence the forces. The specified values are for guidance.

These magnetic systems are suitable for flush installation in the piece of furniture. They are fixed in place using wood screws in the drilled hole. Strong neodymium magnets ensure optimal adhesion, while the included rubber cap protects the magnet core from impacts. The systems are supplied with the appropriate counterpart. The included rubber cap dampens sounds and makes the fitting look good when installed.The assembly set consists of:Magnet2 x disc2 x screwRubber cap

The magnetic door holder is designed for installation in doors or for attachment to the door. When installed, it disappears into the door.

The screw-on magnetic fittings can be used either frontally or laterally depending on the design. They can be securely and stably mounted with two screws. The wide versions with two elongated holes each allow for precise adjustment of the position.The screw-on magnetic fittings impress with a housing made of powder-coated metal, which ensures both a high-quality appearance and high strength. With a construction height of only 10 mm, the system is particularly flat and discreet. A powerful neodymium magnet guarantees reliable holding force* (25 N/2.5 kg). The rubberised contact surface protects against scratches and ensures a pleasant, quiet closing sound. In summary: robust, high-quality and aesthetically pleasing.* The forces were determined at room temperature on a polished steel plate (S235JR according to DIN 10 025) with a thickness of 10 mm (1 kg ~ 10 N). A deviation of up to -10% from the specified value is possible in exceptional cases. Generally, the value is exceeded. The type of application (installation situation, temperatures, counter-anchors, etc.) can significantly influence the forces. The specified values are for guidance.

The magnet A-system Squareline with external thread impresses with its versatile applications. The rubber-coated magnetic systems protect sensitive surfaces, adhere reliably to thin sheets and are excellent for vertical applications. Thanks to their square shape, they can be positioned precisely and provide a form-fitting attachment. Even outdoors, the adhesive force remains stable.External thread: M4 x 6 mmHolding force*: 93 N/9.3 kg* The forces were determined at room temperature on a polished steel plate (S235JR according to DIN 10 025) with a thickness of 10 mm (1 kg ~ 10 N). A deviation of up to -10% from the specified value is possible in exceptional cases. Generally, the value is exceeded. The type of application (installation situation, temperatures, counter anchors, etc.) can significantly influence the forces. The specified values are for orientation.

The pole grippers are magnetic systems housed in a compact cylindrical casing. They are a practical solution for a variety of applications – even in the camping world! With their impressive holding force, they are perfect for securely and reliably holding, clamping, transporting or fastening ferrous tools or parts. Thanks to their compact design (ø 10 x 20 mm) and the zinc-coated steel housing, they are particularly robust and durable – perfect for use in everyday camping, for example, in vehicle repairs, fixtures in motorhomes or for outdoor tools.

This A-system is particularly suitable for use on sensitive surfaces. The special rubber coating prevents scratches or discolouration on the surface. Additionally, the frictional forces are higher due to the rubber coating.

Magnetic systems with rubber coating are true all-rounders and can be found in many areas. The systems are particularly suitable for use on sensitive surfaces and thin sheets, as well as for vertical applications. They are also well-suited for outdoor use.Unlike round magnetic systems, these systems can be positioned in a form-fitting manner.Threaded sleeve M4 x 6 mmHolding force: 93 N/3.8 kg* The forces were determined at room temperature on a polished steel plate (S235JR according to DIN 10 025) with a thickness of 10 mm (1 kg ~ 10 N). A deviation of up to -10% from the specified value is possible in exceptional cases. Generally, the value is exceeded. The type of application (installation situation, temperatures, counter anchors, etc.) can significantly influence the forces. The specified values are for orientation.

Flexibility for magnetic systems Zinc-coated or white painted adhesive discs are indispensable all-rounders for the easy attachment of magnetic systems. They adhere securely to both magnetic and non-magnetic surfaces, making installation a breeze thanks to the double-sided adhesive tape. The metal discs provide a reliable base for magnetic systems, ensuring a secure hold and flexible application possibilities. Be it at home, in a workshop or in the office – these adhesive discs make installation effortless.

The screw-on magnetic fittings can be used either frontally or laterally depending on the design. They can be securely and stably mounted with two screws. The wide versions with two elongated holes each allow for precise adjustment of the position.The screw-on magnetic fittings impress with a housing made of powder-coated metal, which ensures both a high-quality appearance and high strength. With a construction height of only 10 mm, the system is particularly flat and discreet. A powerful neodymium magnet guarantees reliable holding force* (25 N/2.5 kg). The rubberised contact surface protects against scratches and ensures a pleasant, quiet closing sound. In summary: robust, high-quality and aesthetically pleasing.* The forces were determined at room temperature on a polished steel plate (S235JR according to DIN 10 025) with a thickness of 10 mm (1 kg ~ 10 N). A deviation of up to -10% from the specified value is possible in exceptional cases. Generally, the value is exceeded. The type of application (installation situation, temperatures, counter-anchors, etc.) can significantly influence the forces. The specified values are for guidance.

This A-system is particularly suitable for use on sensitive surfaces. The special rubber coating prevents scratches or discoloration on the surface. Additionally, the displacement forces are higher due to the rubber coating.Rubber-coated, ø 31 x 6 mm, NdFeB, external thread M6 x 11, holding force*: 89 N/8.9 kg.* The forces were determined at room temperature on a polished steel plate (S235JR according to DIN 10 025) with a thickness of 10 mm (1 kg ~ 10 N). A deviation of up to -10% from the specified value is possible in exceptional cases. Generally, the value is exceeded. The type of application (installation situation, temperatures, counter anchors, etc.) can significantly influence the forces. The specified values are for guidance.