Awning Omnistor 9200, anthracite, 5 m, Mystic Grey

Multi-functional, self-adhesive rain gutter for installation beneath all awnings.

Two-piece set, length 2 m each. Seals the gap between awning of the series 6 and 9200 and the vehicle. Consists of black EPDM foam with a closed cell structure.

Pole made of aluminium; is simply clamped between the casing and the front, suitable for all awnings of the series 6 and 9.

Crank handle for pulling out and retracting the awning.

To repair smaller damages of the awnings fabric, contains 3 transparent glue strips, dimensions 7.5 x 15 cm each.

Attached at the awnings centre for additional stability. Suitable for Thule Omnistor awnings series 1200 from length 3.5 m and series 5, 6, 8 and 9 from a length exceeding 3.75 m.

Set of 2, for mounting the support legs on the vehicle wall. Suitable for all awnings.

Set of 2 pieces, for the space-saving storage of the hand crank inside the vehicle or on the vehicle wall.

Aluminium made profile specifically developed to connect the LED light strip to the Thule Omnistor awnings 6200 / 6300 / 9200. The profile is installed at the awnings lower edge, thus the strip can also be used when the awnings case is closed. The set consists of 6 profiles 1 m length each.

Placed upon the spring arms, the strap is tensioned sideways. Suitable for all awnings.

Special cleaner for fabrics; content 0.5 litres.

Made of watertight, closed PVC. For drawing into the lead rail and tensioned towards to the front. Height 1.4 m. The area of the rubber tensioners remains open.

The tensioning straps are pulled into the upper hinging points of the support feet and tensioned laterally to the front. Suitable for all awnings series 1200, 5, 6, 8 and 9.

Thule BlockerThe Smart Blockers do not only create additional privacy underneath the awning, they also protect from sun, rain, wind and prying eyes. They are mounted easily and can be freely combined – a perfect and individually adapted private area is the result. Thule Sun Blockers consist of translucent mesh and are available as side and front panel. Also available are Rain and View Blockers made of wind proof PVC. Rain Blockers have a large window. All side elements fit on the left and on the right. They are mounted to the integrated piping rail by means of tensions rafters, front elements are drawn into the awnings front. They are mounted to the support legs by simple straps.ApplicationThule Blockers can be combined in various ways to a complete light tent. The individual types can even be used together to create a perfectly private space, which is adjusted to individual needs. All parts are also applicable in combination with awning tents EasyLink and QuickFit.Measurements taken from the bottom edge of the awning cassette to the floor.Universally fitting panel for left and right side, made of translucent screening material. Suitable for all awnings series 5, 6, 8 and 9. Delivery includes tension rafter and tensioning straps.

Made from translucent and breathable mesh fabric. Fixed by drawing into the lead rail and tensioned to the ground. Can be directly connected to a Sun-Blocker Side to create a more private but still airy space beneath the awning. Height 1.7 m.

Light side panel with a large window, universally fitting for left and right side. Made of waterproof PVC, colour RAL 9002. Mounted via a tension rafter and tensioning down to the ground. Available for all awnings series 5, 6, 8 and 9. Delivery includes tension rafter and tensioning straps.

With large window, made of watertight, closed PVC. Fixated by pulling it into the lead rail and tensioned to the ground. Different sizes can be combined to build a compact front as well as being directly connected to a Rain Blocker Side to create a more private and sheltered space beneath the awning.

The windscreen with automatic roll up system, made of low-maintenance PVC fabric is 1.38 m high and extendible up to 3 m. The vehicle side mounting is done at the awning leg, by sewn-on Velcro, or it can be pitched to be free-standing with the guy ropes delivered with the product. An adapter for installation onto the vehicle in the Keder rail is included in delivery as well as a transportation bag and mounting material. Dimensions rolled up W 10 x H 155 x D 12 cm, weight 4.5 kg.